High capacity and high frequency on a single module, where DDR4 tops out at 3200 MHz. Real-time error correction and an on-board power management circuit.
288-pin U-DIMM format, for desktop PCs
DDR5 generation: a DDR4 slot will not take it
Recent AMD and Intel platforms
CAS latency 46-45-45
On-die error correction, which also relieves the processor
The ADATA U-DIMM DDR5-5600 32 GB memory module brings next-generation memory to desktop computers. With speeds of up to 5600 MHz, on-board power management for greater energy efficiency and double the capacity of previous generations, it delivers optimal performance and improved reliability. This DDR5-5600 module works seamlessly with the latest AMD and Intel platforms, offering broad compatibility and greater stability for all your computing needs.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
Does this DDR5 module fit a DDR4 motherboard?
No. The key notch on the DDR5 connector is not in the same place: the module physically cannot be inserted into a DDR4 slot. This is the first thing to check.
Is this memory module suitable for a laptop?
No: it is a 288-pin U-DIMM, the long module used in desktop PCs. A laptop requires a shorter SO-DIMM.
What does this DDR5 module's on-die error correction bring?
It corrects memory errors right inside the chip, in real time, which also takes load off the processor. This is new with DDR5 and absent from consumer DDR4.
What is the latency of this ADATA memory module?
CAS 46-45-45 at 5,600 MHz. CAS latency increases with DDR5, but frequency rises even more: bandwidth remains far higher than that of DDR4 at 3,200 MHz.
Does this memory module use less power than DDR4?
Yes: it runs at 1.1 V, which means 8% less energy than DDR4. A power management IC (PMIC) is built into the module itself.
Is this product a kit of two modules?
No: it is a single 32 GB module. The motherboard's other slots remain free for a later upgrade.
Does this memory module work on AMD as well as Intel?
Yes: it is rated compatible with recent AMD and Intel platforms, as long as they support DDR5.
Is this ADATA 32 GB DDR5 memory module new and under warranty?
Yes, it is a new ADATA product, reference AD5U560032G-S. The invoice serves as the warranty document, for 1 year. Datasheet: ADATA U-DIMM 32 GB DDR5-5600.
Fast DDR5 desktop memory with Intel XMP 3.0 and AMD EXPO profiles and a black aluminium heatsink. Capacity: 16 GB (1 × 16 GB) · 288-pin U-DIMM Speed: 6000 MT/s (PC5-48000) · CL36 latency (36-38-38-125) Voltage: 1.25 V with XMP/EXPO · 1.1 V standard Compatibility: Intel and AMD AM5 DDR5 motherboards
DDR5 desktop memory that runs at 5600 MT/s out of the box, with a black aluminium heatsink. Capacity: 16 GB (1 × 16 GB) · 288-pin U-DIMM Speed: 5600 MT/s (PC5-44800) · CL46 latency Voltage: 1.1 V Compatibility: Intel and AMD AM5 DDR5 motherboards A simple upgrade for smoother office work, multitaski
16 GB DDR5 module with a 33.8 mm low-profile heatsink, designed for compact cases and large CPU coolers. 6000 MT/s at CL48 via Intel XMP 3.0 or AMD EXPO, built-in PMIC and on-die ECC, no lighting.
Registered in the RDIMM format: it only works in a server designed for that type of memory. Qualified by HPE on its platforms, with error detection that avoids needless replacements.
Works with recent AMD and Intel platforms. Power management built into the module (PMIC) at 1.1 V and on-die error correction, with around 8% lower consumption than DDR4.
Designed for HPE ProLiant Gen9, Gen10 and Gen10 Plus servers, as well as for the Apollo, Synergy and Blade ranges. Stated target: cloud computing, virtualisation and databases.
Intended for mainstream HPE Compute platforms, this server memory is tested and authenticated by HPE before shipping. CAS latency 22-22-22, 1.2 V voltage and unbuffered operation.
Compliant with JEDEC standards, it installs with no tuning and runs at 1.2 V to limit heat inside the case. Bandwidth of 25,600 MB/s and compatibility validated on the common Intel and AMD platforms.
Error correction (ECC): errors are corrected on the fly, data protected
•Frequency 2666 MHz
In stock
6 879 DHincl. VAT6 879,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
3 762 DHincl. VAT3 762,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
3 678 DHincl. VAT3 678,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•One 16 GB DDR5 U-DIMM module
•6000 MT/s at CL48 via XMP 3.0 or EXPO
•Native frequency 4800 MT/s (40-39-39-77, 1.1 V)
In stock
3 300 DHincl. VAT3 300,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Registered RDIMM format: servers only, never a desktop PC
•DDR4 generation, not compatible with a DDR5 slot
•Tested and qualified by HPE on all its server platforms
In stock
3 129 DHincl. VAT3 129,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Fits a laptop SO-DIMM slot
•DDR5 262-pin connector, not compatible with a DDR4 slot
•Single module, one slot occupied
In stock
3 069 DHincl. VAT3 069,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•HPE ProLiant Gen9, Gen10 and Gen10 Plus servers
•Also intended for the Apollo, Synergy and Blade ranges
•U-DIMM format, not to be confused with registered RDIMM modules
In stock
1 899 DHincl. VAT1 899,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
A single module in the kit (1 x 16 GB)
•Unbuffered DIMM format
•Single rank, x8 chips
In stock
1 829 DHincl. VAT1 829,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Sold on its own (1 x 16 GB), not a kit
•288-pin non-ECC unbuffered DIMM
•Validated compatibility: Intel Z390, Z490, Z590 and AMD B550, X570
DDR5 desktop memory that runs at 5600 MT/s out of the box, with a black aluminium heatsink. Capacity: 16 GB (1 × 16 GB) · 288-pin U-DIMM Speed: 5600 MT/s (PC5-44800) · CL46 latency Voltage: 1.1 V Compatibility: Intel and AMD AM5 DDR5 motherboards A simple upgrade for smoother office work, multitaski
Fast DDR5 desktop memory with Intel XMP 3.0 and AMD EXPO profiles and a black aluminium heatsink. Capacity: 16 GB (1 × 16 GB) · 288-pin U-DIMM Speed: 6000 MT/s (PC5-48000) · CL36 latency (36-38-38-125) Voltage: 1.25 V with XMP/EXPO · 1.1 V standard Compatibility: Intel and AMD AM5 DDR5 motherboards
16 GB DDR5 module with a 33.8 mm low-profile heatsink, designed for compact cases and large CPU coolers. 6000 MT/s at CL48 via Intel XMP 3.0 or AMD EXPO, built-in PMIC and on-die ECC, no lighting.
Works with recent AMD and Intel platforms. Power management built into the module (PMIC) at 1.1 V and on-die error correction, with around 8% lower consumption than DDR4.
Bandwidth per core up and consumption down: 1.1 V, around 8% less than DDR4, with an on-board PMIC. On-die error correction, on recent AMD as well as Intel laptops.
Compatible with the ProDesk 400 and 600 G5/G6 mini PCs, the EliteDesk 705 G5, 805 G6 and 800 G5/G6 95 W, the EliteOne 800 G5/G6 23.8-inch all-in-ones and the Elite Slice for meeting rooms G2.
•HP ProDesk 400 G5/G6 and ProDesk 600 G5/G6 mini PCs
•HP EliteDesk 705 G5, 805 G6 and 800 G5/G6 95 W mini PCs
A single module to slide into a free slot on a desktop PC: the long format does not fit a laptop, and the motherboard has to accept this generation of memory.
Careful cooling: a 42 mm tall black aluminium heat spreader, to be measured before sliding it under a large CPU cooler. XMP 2.0 profile on Intel, Ryzen support on AMD, for 25600 MB/s of bandwidth.