Skip to main content

Pay now View my order

Studio, Podcast & Music Production

· 162 references

Hollyland Lark A1 Combo Wireless Microphone (6976068118336)Two transmitters to pick up two voices, with USB-C and Lightning receivers compatible with Android and iPhone.
- 2 transmitters for 2 voices at the same time
- USB-C and Lightning receivers included
- Charging case for extended running time
649,00 DH incl. VAT
PreSonus Eris 3.5 Gen 2 — Pair of 3.5″ Active Studio MonitorsBass and treble controls on the rear to compensate for a wall that is too close or a reflective desk. Kevlar cones, silk tweeters, 25 W per speaker, jack input and headphone output within reach on the front.
- 25 W RMS per speaker, class AB amplification
- Kevlar driver and 1 inch silk tweeter
- Bass and treble controls on the rear panel
1 399,00 DH incl. VAT
JBL Partybox Wireless Microphones - Pack of 2 Mics (1200130010156)Ten minutes of charging give back two hours of singing, and you keep singing while the microphone recharges on the speaker. Up to 20 hours of battery life, 30 metres of freedom with the dongle, built-in pop filter and shock mount.
- Battery life up to 20 hours per microphone
- 10 minutes of charging for 2 extra hours of use
- Usable while recharging on the speaker
1 599,00 DH incl. VAT
Superlux HM58B — Universal Microphone Clip HolderA 5/8 inch thread to the microphone-stand standard, and a quick grip to fit or remove the microphone between two speeches. It takes handheld microphones of the SM58 and HM58 size, in a reinforced build.
- 5/8 inch thread, the microphone-stand standard
- Takes handheld microphones of the SM58 and HM58 size
- Quick to fit and remove
455,00 DH incl. VAT
Superlux E205U — Supercardioid Condenser USB MicrophonePlugged straight into the computer, with no audio interface and no driver to install. The large diaphragm brings studio-microphone warmth to the voice, the headphone output lets you monitor live, and the tilting desk stand is included.
- Plugs straight into the computer, no audio interface needed
- Large diaphragm for studio-microphone warmth
- Front pickup that keeps room noise out
655,00 DH incl. VAT
Superlux HM6 — Handheld Cardioid Dynamic MicrophoneKaraoke, party hosting or public speaking: a steel stage microphone that copes with being handled. It connects over XLR to a PA system or a mixing desk and needs no power supply. Clip and stand adapter included.
- XLR connection to a PA system or a mixing desk
- No phantom power required
- Front pickup, suited to the stage
175,00 DH incl. VAT

162 ref.references

Sort by

Image 1 of 8
Hollyland
Product reference:6976068118336Best sellerNew
Hollyland Lark A1 Combo Wireless Microphone (6976068118336)
Product reference:6976068118336
2 transmitters for 2 voices at the same time
USB-C and Lightning receivers included
Charging case for extended running time
Cable-free digital link
Two transmitters to pick up two voices, with USB-C and Lightning receivers compatible with Android and iPhone.
Two transmitters to pick up two voices, with USB-C and Lightning receivers compatible with Android and iPhone.
2 transmitters for 2 voices at the same time
USB-C and Lightning receivers included
Charging case for extended running time
Cable-free digital link
The Hollyland Lark A1 Combo is a complete wireless microphone kit for mobile creators: two transmitters to record two voices, plus a USB-C receiver and a Lightning receiver so you can connect either an Android smartphone or an iPhone. The transmitters clip onto clothing and slot into their charging case, which extends battery life throughout the day. The digital link stays stable on the move, and recording happens with no cable between the subject and the device. A compact, ready-to-go format for interviews, vlogs, short-form content and speaking to camera.
In stock Warranty 1 year
649 DHincl. VAT
Order via WhatsApp — Hollyland Lark A1 Combo Wireless Microphone (6976068118336)
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 649,00 DH incl. VAT
In stock
Order via WhatsApp — Hollyland Lark A1 Combo Wireless Microphone (6976068118336)
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
PreSonus
Product reference:2777506121Best sellerNew
PreSonus Eris 3.5 Gen 2 — Pair of 3.5″ Active Studio Monitors
Product reference:2777506121
25 W RMS per speaker, class AB amplification
Kevlar driver and 1 inch silk tweeter
Bass and treble controls on the rear panel
Balanced 6.35 mm TRS and stereo RCA inputs
3.5 mm auxiliary input on the front
Headphone output on the front
Link cable between the two speakers, RCA and jack cables included
Bass and treble controls on the rear to compensate for a wall that is too close or a reflective desk. Kevlar cones, silk tweeters, 25 W per speaker, jack input and headphone output within reach on the front.
Bass and treble controls on the rear to compensate for a wall that is too close or a reflective desk. Kevlar cones, silk tweeters, 25 W per speaker, jack input and headphone output within reach on the front.
25 W RMS per speaker, class AB amplification
Kevlar driver and 1 inch silk tweeter
Bass and treble controls on the rear panel
Balanced 6.35 mm TRS and stereo RCA inputs
3.5 mm auxiliary input on the front
Headphone output on the front
Link cable between the two speakers, RCA and jack cables included
The most affordable studio monitors, now in their second generation (Gen 2). A compact pair of active studio monitors: 3.5″ Kevlar woofer, ribbon tweeter, class AB amplification, high/low EQ controls. The Eris 3.5 benchmark, updated for the desk and the home studio.
Active stereo pair (linked left + right)
3.5″ Kevlar woofer + silk tweeter
25 W class AB amplification per speaker
High / low EQ to suit your room’s acoustics
TRS / RCA / 3.5 mm aux inputs + front-panel headphone output
Designed for the desk, home studio and multimedia
In stock Warranty 1 year
1 399 DHincl. VAT
Order via WhatsApp — PreSonus Eris 3.5 Gen 2 — Pair of 3.5″ Active Studio Monitors
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 399,00 DH incl. VAT
In stock
Order via WhatsApp — PreSonus Eris 3.5 Gen 2 — Pair of 3.5″ Active Studio Monitors
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
Superlux
Product reference:HM58BBest sellerNew
Superlux HM58B — Universal Microphone Clip Holder
Product reference:HM58B
5/8 inch thread, the microphone-stand standard
Takes handheld microphones of the SM58 and HM58 size
Quick to fit and remove
Reinforced build
Black finish
A 5/8 inch thread to the microphone-stand standard, and a quick grip to fit or remove the microphone between two speeches. It takes handheld microphones of the SM58 and HM58 size, in a reinforced build.
A 5/8 inch thread to the microphone-stand standard, and a quick grip to fit or remove the microphone between two speeches. It takes handheld microphones of the SM58 and HM58 size, in a reinforced build.
5/8 inch thread, the microphone-stand standard
Takes handheld microphones of the SM58 and HM58 size
Quick to fit and remove
Reinforced build
Black finish
The universal holder accessory for handheld microphones. Universal clip holder for SM58/HM58-style and compatible handheld microphones. Standard 5/8″ thread, reinforced construction, quick fitting on a microphone stand.
Universal clip holder for handheld microphones
Compatible with SM58 / HM58 / similar style microphones
Standard 5/8″ thread
Reinforced construction
Quick fitting on a microphone stand
Colour: black
In stock Warranty 1 year
455 DHincl. VAT
Order via WhatsApp — Superlux HM58B — Universal Microphone Clip Holder
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 455,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM58B — Universal Microphone Clip Holder
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 6
Focusrite
Product reference:MOSC0032New
Focusrite Scarlett Solo 4th Gen USB-C Audio Interface - 1 Mic Preamp, Guitar Input
Product reference:MOSC0032
1 XLR mic preamp, 48 V phantom power
1 Hi-Z line/instrument input on the front
24-bit / 192 kHz conversion, 120 dB dynamic range
Air mode: Presence and Harmonic Drive
Headphone output with its own volume + 2 TRS line outputs
Loopback: 4 inputs × 2 outputs simultaneously
Powered over USB-C, no power adapter
Ableton Live Lite, Pro Tools Intro+ and Cubase LE included
USB-C audio interface for recording a voice and a guitar at the same time: an XLR mic preamp with 48 V phantom power, a Hi-Z instrument input on the front and 24-bit / 192 kHz conversion, all powered by a single USB cable.
USB-C audio interface for recording a voice and a guitar at the same time: an XLR mic preamp with 48 V phantom power, a Hi-Z instrument input on the front and 24-bit / 192 kHz conversion, all powered by a single USB cable.
1 XLR mic preamp, 48 V phantom power
1 Hi-Z line/instrument input on the front
24-bit / 192 kHz conversion, 120 dB dynamic range
Air mode: Presence and Harmonic Drive
Headphone output with its own volume + 2 TRS line outputs
Loopback: 4 inputs × 2 outputs simultaneously
Powered over USB-C, no power adapter
Ableton Live Lite, Pro Tools Intro+ and Cubase LE included
USB-C audio interface for anyone who sings and plays at the same time: a 48 V mic preamp, a Hi-Z guitar input and Air mode for a big-console sound.
Inputs: 1 XLR mic input on the rear · 1 line/instrument 6.35 mm jack on the front
Sound: 24-bit / 192 kHz conversion, 120 dB dynamic range, 57 dB of gain
Monitoring: headphone output with its own volume · 2 balanced line outputs for speakers
Computer: USB-C, powered by the USB port, Loopback to record your computer's audio
Software: Ableton Live Lite, Pro Tools Intro+ and Cubase LE, plus the Hitmaker Expansion bundle
Instead of a USB microphone: a real XLR preamp and a guitar input, in a 382 g interface powered by your computer.
In stock Warranty 3 years
2 316 DHincl. VAT
Order via WhatsApp — Focusrite Scarlett Solo 4th Gen USB-C Audio Interface - 1 Mic Preamp, Guitar Input
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 2 316,00 DH incl. VAT
In stock
Order via WhatsApp — Focusrite Scarlett Solo 4th Gen USB-C Audio Interface - 1 Mic Preamp, Guitar Input
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
3 years
Superlux
Product reference:HM6Best sellerNew
Superlux HM6 — Handheld Cardioid Dynamic Microphone
Product reference:HM6
XLR connection to a PA system or a mixing desk
No phantom power required
Front pickup, suited to the stage
Steel body
Clip and stand adapter included
For karaoke, hosting and public speaking
Karaoke, party hosting or public speaking: a steel stage microphone that copes with being handled. It connects over XLR to a PA system or a mixing desk and needs no power supply. Clip and stand adapter included.
Karaoke, party hosting or public speaking: a steel stage microphone that copes with being handled. It connects over XLR to a PA system or a mixing desk and needs no power supply. Clip and stand adapter included.
XLR connection to a PA system or a mixing desk
No phantom power required
Front pickup, suited to the stage
Steel body
Clip and stand adapter included
For karaoke, hosting and public speaking
The rugged handheld mic for stage and events. Cardioid dynamic capsule, XLR output, rugged steel construction: the HM6 is the reliable handheld mic for the stage, karaoke, events and public speaking.
Cardioid dynamic capsule
Balanced XLR output
Rugged steel construction
Ideal for the stage, karaoke and events
No phantom power required
Superlux value for money
In stock Warranty 1 year
175 DHincl. VAT
Order via WhatsApp — Superlux HM6 — Handheld Cardioid Dynamic Microphone
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 175,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM6 — Handheld Cardioid Dynamic Microphone
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Superlux
Product reference:E205UBest sellerNew
Superlux E205U — Supercardioid Condenser USB Microphone
Product reference:E205U
Plugs straight into the computer, no audio interface needed
Large diaphragm for studio-microphone warmth
Front pickup that keeps room noise out
Headphone output to monitor live, with no delay
Tilting desk stand included
USB cable included
Compatible with Windows and macOS
Plugged straight into the computer, with no audio interface and no driver to install. The large diaphragm brings studio-microphone warmth to the voice, the headphone output lets you monitor live, and the tilting desk stand is included.
Plugged straight into the computer, with no audio interface and no driver to install. The large diaphragm brings studio-microphone warmth to the voice, the headphone output lets you monitor live, and the tilting desk stand is included.
Plugs straight into the computer, no audio interface needed
Large diaphragm for studio-microphone warmth
Front pickup that keeps room noise out
Headphone output to monitor live, with no delay
Tilting desk stand included
USB cable included
Compatible with Windows and macOS
The Taiwanese USB condenser at an unbeatable price. Large-diaphragm cardioid condenser capsule, plug-and-play USB output, zero-latency headphone output: the E205U is aimed at podcasters, creators and home studios who want studio quality without breaking the bank.
Large-diaphragm cardioid condenser capsule
Plug-and-play USB connection
Zero-latency headphone output
Tilting desk stand included
Ideal for podcasting, streaming and voice-over
Superlux value for money
In stock Warranty 1 year
655 DHincl. VAT
Order via WhatsApp — Superlux E205U — Supercardioid Condenser USB Microphone
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 655,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux E205U — Supercardioid Condenser USB Microphone
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Superlux
Product reference:TM58SBlack FridayNew-5%
Superlux TM58S Dynamic Microphone - Handheld, Cardioid, Lockable On/Off Switch
Product reference:TM58S
Cardioid dynamic
Lockable on/off switch
50 Hz to 18 kHz
155 dB SPL maximum
3-pin XLR output
Capsule on shock mount
320 g, metal body
A cardioid dynamic microphone for vocals, with a lockable on/off switch on the body. It handles 155 dB SPL, outputs over XLR and needs no power; HM9A clip and YA3 thread adapter included.
A cardioid dynamic microphone for vocals, with a lockable on/off switch on the body. It handles 155 dB SPL, outputs over XLR and needs no power; HM9A clip and YA3 thread adapter included.
Cardioid dynamic
Lockable on/off switch
50 Hz to 18 kHz
155 dB SPL maximum
3-pin XLR output
Capsule on shock mount
320 g, metal body
A handheld dynamic microphone for vocals on stage, in rehearsal or for hosting: cardioid pattern, lockable on/off switch and 155 dB SPL handling.
Capture: response from 50 Hz to 18 kHz, -53 dBV/Pa sensitivity, 500 ohm impedance
Connection: 3-pin XLR output, no power or battery needed
Handling: capsule on a shock mount against hand noise
Supplied: HM9A microphone clip and YA3 thread adapter; XLR cable not included
Build: metal body with matte finish, 320 g
The switched version of the TM58, to mute the microphone without touching the mixer.
In stock Warranty 1 yearEnds in 3 d 10 h
304,00 DH incl. VAT-5%
290 DHincl. VAT
Order via WhatsApp — Superlux TM58S Dynamic Microphone - Handheld, Cardioid, Lockable On/Off Switch
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 290,00 DH incl. VAT, was 304,00 DH incl. VAT
In stock
Ends in 3 d 10 h
Order via WhatsApp — Superlux TM58S Dynamic Microphone - Handheld, Cardioid, Lockable On/Off Switch
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
K&M
Product reference:23840-300-55Black FridayNew-4%
Microphone boom arm K&M 23840 with desk clamp, 82 cm reach, 0.8 kg load - black (23840-300-55)
Product reference:23840-300-55
Reach up to 820 mm
Length 460 to 960 mm
Load up to 0.8 kg
3/8" and 5/8" connectors
Clamp for board or tube up to 51 mm
Spring-loaded arms, 3 knurled nuts
4 cable clips included
Weight 1.4 kg
K&M 23840 spring-loaded microphone arm: desk clamp for a board or tube up to 51 mm, reach up to 820 mm, 3/8" and 5/8" connectors and a load of up to 0.8 kg. For the studio and the multimedia workstation, supplied without cable with 4 clips.
K&M 23840 spring-loaded microphone arm: desk clamp for a board or tube up to 51 mm, reach up to 820 mm, 3/8" and 5/8" connectors and a load of up to 0.8 kg. For the studio and the multimedia workstation, supplied without cable with 4 clips.
Reach up to 820 mm
Length 460 to 960 mm
Load up to 0.8 kg
3/8" and 5/8" connectors
Clamp for board or tube up to 51 mm
Spring-loaded arms, 3 knurled nuts
4 cable clips included
Weight 1.4 kg
Articulated microphone arm for the recording studio and the multimedia workstation: desk clamp, spring-loaded arms and 3/8" and 5/8" connectors.
Reach: up to 820 mm, length 460 to 960 mm
Load: 0.8 kg in total, microphone, tablet or smartphone
Mounting: clamp for a board or tube up to 51 mm, table flange or wall mount available as options
Adjustment: spring-loaded arms, 3 knurled nuts at the joints
Cabling: supplied without cable, 4 clips included
An arm that frees the work surface and puts the microphone within speaking distance, instead of a table stand.
In stock Warranty 1 yearEnds in 2 d 15 h
1 146,00 DH incl. VAT-4%
1 099 DHincl. VAT
Order via WhatsApp — Microphone boom arm K&M 23840 with desk clamp, 82 cm reach, 0.8 kg load - black (23840-300-55)
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 1 099,00 DH incl. VAT, was 1 146,00 DH incl. VAT
In stock
Ends in 2 d 15 h
Order via WhatsApp — Microphone boom arm K&M 23840 with desk clamp, 82 cm reach, 0.8 kg load - black (23840-300-55)
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 5
Audio-Technica
Product reference:AT2020USB-XPBlack FridayNew-4%
Audio-Technica AT2020USB-XP USB Microphone - Cardioid Condenser, Noise Reduction, USB-C
Product reference:AT2020USB-XP
Cardioid condenser, USB-C output
3-level noise reduction
Automatic gain control
Up to 24-bit / 192 kHz
3.5 mm headphone output, zero-latency monitoring
Adjustable mic/computer mix
Touch mute
Desk stand and pop filter included
Windows 10 and 11, macOS
A cardioid USB-C condenser microphone for streaming, podcasting and remote work: three-level noise reduction, automatic gain, up to 24-bit/192 kHz. Zero-latency headphone output, mic/computer mix; desk stand and pop filter included.
A cardioid USB-C condenser microphone for streaming, podcasting and remote work: three-level noise reduction, automatic gain, up to 24-bit/192 kHz. Zero-latency headphone output, mic/computer mix; desk stand and pop filter included.
Cardioid condenser, USB-C output
3-level noise reduction
Automatic gain control
Up to 24-bit / 192 kHz
3.5 mm headphone output, zero-latency monitoring
Adjustable mic/computer mix
Touch mute
Desk stand and pop filter included
Windows 10 and 11, macOS
A USB condenser microphone for streaming, podcasting and remote work: 3-level noise reduction, automatic gain and zero-latency monitoring.
Capture: cardioid capsule, response from 20 Hz to 20 kHz, conversion up to 24-bit / 192 kHz
Controls: headphone volume, mic/computer mix and touch mute, on the microphone
Headphones: 3.5 mm jack, 110 mW into 32 ohms
Connection: USB-C, 2 m cable and USB-A to USB-C adapter, Windows and macOS
Supplied: desk stand and clip-on pop filter
The sound of the AT2020 over USB, with digital processing that makes any software unnecessary.
In stock Warranty 1 yearEnds in 1 d 15 h
2 082,00 DH incl. VAT-4%
1 995 DHincl. VAT
Order via WhatsApp — Audio-Technica AT2020USB-XP USB Microphone - Cardioid Condenser, Noise Reduction, USB-C
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 995,00 DH incl. VAT, was 2 082,00 DH incl. VAT
In stock
Ends in 1 d 15 h
Order via WhatsApp — Audio-Technica AT2020USB-XP USB Microphone - Cardioid Condenser, Noise Reduction, USB-C
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
ADAM Audio
Product reference:11105010New
ADAM Audio D3V (White) — Pair of USB-C Active Studio Monitors with DSP
Product reference:11105010
3.5" driver + S-ART ribbon tweeter
70 W RMS Class D amplification per speaker
Frequency response 60 Hz – 50 kHz
aptX HD Bluetooth
S-ART ribbon tweeter and 70 W RMS of amplification per speaker, with aptX HD Bluetooth as well.
S-ART ribbon tweeter and 70 W RMS of amplification per speaker, with aptX HD Bluetooth as well.
3.5" driver + S-ART ribbon tweeter
70 W RMS Class D amplification per speaker
Frequency response 60 Hz – 50 kHz
aptX HD Bluetooth
The studio on your desk, in a white finish. A compact pair of active studio monitors: 3.5″ driver + S-ART ribbon tweeter, built-in DSP, USB-C connection, Bluetooth aptX HD. A white finish that blends into modern setups.
Stereo pair of active studio monitors
3.5″ driver + ADAM’s signature S-ART ribbon tweeter
70 W RMS amplification per speaker (Class D)
USB-C + Bluetooth aptX HD connection
EQ DSP to suit your desk
Matt white finish
In stock Warranty 1 year
2 979 DHincl. VAT
Order via WhatsApp — ADAM Audio D3V (White) — Pair of USB-C Active Studio Monitors with DSP
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 2 979,00 DH incl. VAT
In stock
Order via WhatsApp — ADAM Audio D3V (White) — Pair of USB-C Active Studio Monitors with DSP
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Bosch
Product reference:MW1-HTX-F4Black Friday-170 DH
Bosch MW1-HTX-F4 Microphone Black
Product reference:MW1-HTX-F4
Frequency response 50-15,000 Hz
Dynamic range 110 dB
Wireless UHF transmission
LCD monitoring display
Wireless unidirectional condenser design with stable UHF transmission, a frequency response of 50 to 15,000 Hz and an LCD monitoring display.
Wireless unidirectional condenser design with stable UHF transmission, a frequency response of 50 to 15,000 Hz and an LCD monitoring display.
Frequency response 50-15,000 Hz
Dynamic range 110 dB
Wireless UHF transmission
LCD monitoring display
Capture every word with exceptional clarity with the Bosch MW1-HTX-F4 wireless microphone in black. Designed for conferences, presentations and professional events, it delivers precise voice reproduction thanks to its unidirectional condenser technology, which effectively reduces background noise. Its extended frequency response from 50 to 15,000 Hz and 110 dB dynamic range deliver rich, natural sound. UHF wireless technology provides stable, reliable transmission, while the LCD screen makes it easy to monitor frequencies and battery. Light, capable and easy to use, this microphone is an ideal choice for high-quality professional communication. Transmitter optional.
In stock Warranty 1 yearEnds in 2 d 22 h
3 499,00 DH incl. VAT-170 DH
3 329 DHincl. VAT
Order via WhatsApp — Bosch MW1-HTX-F4 Microphone Black
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Datasheet (PDF)
Price: 3 329,00 DH incl. VAT, was 3 499,00 DH incl. VAT
In stock
Ends in 2 d 22 h
Order via WhatsApp — Bosch MW1-HTX-F4 Microphone Black
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Bosch
Product reference:MW1-RX-F4
Bosch 606-630 MHz Microphone Receiver (MW1-RX-F4)
Product reference:MW1-RX-F4
97 to 193 selectable UHF channels
PLL synthesis
True diversity (stable reception)
Table or 19" rack mounting
97 to 193 selectable UHF channels via PLL synthesis, with true diversity and background noise suppression, mountable on a table or in a 19-inch rack.
97 to 193 selectable UHF channels via PLL synthesis, with true diversity and background noise suppression, mountable on a table or in a 19-inch rack.
97 to 193 selectable UHF channels
PLL synthesis
True diversity (stable reception)
Table or 19" rack mounting
Get the best audio performance from the Bosch 606-630 MHz Microphone Receiver. With 97 to 193 selectable UHF channels and PLL synthesised technology, this receiver provides stable, interference-free reception. True diversity and background noise suppression deliver exceptional sound quality, ideal for demanding environments. Versatile, it installs easily on a table or in a 19" rack, giving you maximum flexibility for your professional sound reinforcement needs.
In stock Warranty 1 year
4 449 DHincl. VAT
Order via WhatsApp — Bosch 606-630 MHz Microphone Receiver (MW1-RX-F4)
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Datasheet (PDF)
Price: 4 449,00 DH incl. VAT
In stock
Order via WhatsApp — Bosch 606-630 MHz Microphone Receiver (MW1-RX-F4)
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
Yellow Cable
Product reference:B35New
Yellow Cable B35 Microphone Clip Thread Adapter, 5/8" to 3/8", Pack of 2
Product reference:B35
Pack of 2 adapters
5/8" clip on 3/8" stand
Metal
Sold in a blister pack
Pack of two Yellow Cable metal thread adapters, to fit a microphone clip with a 5/8" thread on a microphone stand with a 3/8" thread.
Pack of two Yellow Cable metal thread adapters, to fit a microphone clip with a 5/8" thread on a microphone stand with a 3/8" thread.
Pack of 2 adapters
5/8" clip on 3/8" stand
Metal
Sold in a blister pack
A thread adapter to fit a microphone clip on a stand with a different thread: 5/8" clip on a 3/8" stand, in metal, sold in pairs.
Threads: 5/8" on the clip side · 3/8" on the stand, boom or desk stand side
Contents: 2 adapters in a blister pack
Material: metal
The small part that saves you from changing clip or stand when the microphone and its support do not share the same thread.
In stock Warranty 1 year
39 DHincl. VAT
Order via WhatsApp — Yellow Cable B35 Microphone Clip Thread Adapter, 5/8" to 3/8", Pack of 2
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 39,00 DH incl. VAT
In stock
Order via WhatsApp — Yellow Cable B35 Microphone Clip Thread Adapter, 5/8" to 3/8", Pack of 2
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
K&M
Product reference:21700-000-29New
Thread adapter K&M 217 for microphones, 3/8" female to 5/8" male - zinc-plated (21700-000-29)
Product reference:21700-000-29
3/8" female thread
5/8"-27 male thread
5/8" clip on a 3/8" stand
Zinc-plated steel
Weight 11 g
K&M 217 thread adapter in zinc-plated steel: 3/8" female thread on one side, 5/8"-27 male thread on the other. Screwed into a 5/8" microphone clip or holder, it lets you fit it on a stand with a 3/8" screw.
K&M 217 thread adapter in zinc-plated steel: 3/8" female thread on one side, 5/8"-27 male thread on the other. Screwed into a 5/8" microphone clip or holder, it lets you fit it on a stand with a 3/8" screw.
3/8" female thread
5/8"-27 male thread
5/8" clip on a 3/8" stand
Zinc-plated steel
Weight 11 g
Thread adapter for fitting a 5/8" microphone clip on a 3/8" stand screw: 3/8" female thread, 5/8"-27 male thread and zinc-plated steel.
Threads: 3/8" female inside, 5/8"-27 male outside
Material: zinc-plated steel, 11 g
Fitting: screws by hand into the clip, which then screws onto the stand
Contents: 1 adapter, K&M reference 21700-000-29
The small part that saves changing clips when the stand and the microphone do not share the same screw thread.
In stock Warranty 1 year
50 DHincl. VAT
Order via WhatsApp — Thread adapter K&M 217 for microphones, 3/8" female to 5/8" male - zinc-plated (21700-000-29)
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 50,00 DH incl. VAT
In stock
Order via WhatsApp — Thread adapter K&M 217 for microphones, 3/8" female to 5/8" male - zinc-plated (21700-000-29)
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 4
Vicoustic
Product reference:B00017New
Vicoustic MD55 Foam Acoustic Panel, 30 x 30 cm, sold individually
Product reference:B00017
300 x 300 x 55 mm foam panel
NRC 0.60
Mid and high frequencies, α = 0.90 at 4000 Hz
Installed on its own or in a pattern
Glued to the wall or ceiling
80 g per panel
Sold individually
A small 30 x 30 cm polyurethane foam acoustic panel, 55 mm thick, NRC 0.60, most effective in the mid and high frequencies. It is glued to the wall or ceiling, on its own or in a pattern, and sold individually.
A small 30 x 30 cm polyurethane foam acoustic panel, 55 mm thick, NRC 0.60, most effective in the mid and high frequencies. It is glued to the wall or ceiling, on its own or in a pattern, and sold individually.
300 x 300 x 55 mm foam panel
NRC 0.60
Mid and high frequencies, α = 0.90 at 4000 Hz
Installed on its own or in a pattern
Glued to the wall or ceiling
80 g per panel
Sold individually
A small foam acoustic panel to treat a studio, a rehearsal room or a home cinema: the Vicoustic MD55 is glued on its own or in a pattern on walls as well as ceilings.
Absorption: NRC 0.60, mainly in the mid and high frequencies, up to α = 0.90 at 4,000 Hz
Material: polyurethane foam with raised ridges
Size: 300 x 300 mm, 55 mm thick, 80 g
Mounting: Flexi Glue Ultra adhesive, sold separately
Sold individually: order as many as the surface to cover requires.
In stock Warranty 3 years
99 DHincl. VAT
Order via WhatsApp — Vicoustic MD55 Foam Acoustic Panel, 30 x 30 cm, sold individually
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 99,00 DH incl. VAT
In stock
Order via WhatsApp — Vicoustic MD55 Foam Acoustic Panel, 30 x 30 cm, sold individually
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
3 years
Image 1 of 4
Superlux
Product reference:HM26BNew
Superlux HM26B Shock Mount - Plastic Frame, for 22 to 26 mm Diameter Microphones
Product reference:HM26B
Microphones 22 to 26 mm in diameter
Elastic suspension
Plastic frame
YA2 5/8" to 3/8" adapter supplied
Elastic shock mount with a plastic frame for a microphone whose body is 22 to 26 mm in diameter. It screws onto a microphone stand; the YA2 threaded adapter (5/8" to 3/8") is supplied.
Elastic shock mount with a plastic frame for a microphone whose body is 22 to 26 mm in diameter. It screws onto a microphone stand; the YA2 threaded adapter (5/8" to 3/8") is supplied.
Microphones 22 to 26 mm in diameter
Elastic suspension
Plastic frame
YA2 5/8" to 3/8" adapter supplied
A shock mount for a slim microphone, 22 to 26 mm in diameter: elastic suspension, plastic frame and threaded adapter included.
Compatibility: microphones whose body is 22 to 26 mm in diameter
Role: damps the shocks and vibrations passed on by the stand before they reach the capsule
Fixing: on a microphone stand, YA2 5/8" to 3/8" zinc alloy threaded adapter
Colour: black
Measure the microphone body before choosing: a wider large-diaphragm microphone needs another mount.
In stock Warranty 1 year
124 DHincl. VAT
Order via WhatsApp — Superlux HM26B Shock Mount - Plastic Frame, for 22 to 26 mm Diameter Microphones
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 124,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM26B Shock Mount - Plastic Frame, for 22 to 26 mm Diameter Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Superlux
Product reference:EM210New
Superlux EM210 Lavalier Microphone - Omnidirectional, 3.5 mm Jack, 3 m Cable, PS210 Battery Adapter
Product reference:EM210
Omnidirectional lavalier microphone
Integrated 3 m cable
3.5 mm mono jack plug
PS210 adapter to 6.35 mm jack
1.5 V AA battery included
30 Hz to 18 kHz
25 g
An omnidirectional electret lavalier microphone for teachers, presenters or stands speaking through a small PA. 3 m cable with 3.5 mm plug, PS210 battery adapter to 6.35 mm jack, AA battery, clip and windscreen included.
An omnidirectional electret lavalier microphone for teachers, presenters or stands speaking through a small PA. 3 m cable with 3.5 mm plug, PS210 battery adapter to 6.35 mm jack, AA battery, clip and windscreen included.
Omnidirectional lavalier microphone
Integrated 3 m cable
3.5 mm mono jack plug
PS210 adapter to 6.35 mm jack
1.5 V AA battery included
30 Hz to 18 kHz
25 g
A lavalier microphone for teachers, presenters or stands speaking through a small PA: omnidirectional capsule, 3 m cable and PS210 battery adapter to a 6.35 mm jack.
Capture: 9.7 mm electret, response from 30 Hz to 18 kHz, -46 dBV/Pa sensitivity
Connection: 3.5 mm mono jack plug, extended to a 6.35 mm jack by the PS210 adapter
Power: one 1.5 V AA battery, included, housed in the adapter
Supplied: tie clip and windscreen
Discretion: 13.5 mm capsule, 25 g
Recommended by Superlux with the MA500 voice enhancer, for hands-free speaking.
In stock Warranty 1 year
124 DHincl. VAT
Order via WhatsApp — Superlux EM210 Lavalier Microphone - Omnidirectional, 3.5 mm Jack, 3 m Cable, PS210 Battery Adapter
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 124,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux EM210 Lavalier Microphone - Omnidirectional, 3.5 mm Jack, 3 m Cable, PS210 Battery Adapter
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Superlux
Product reference:HM26ANew
Superlux HM26A Shock Mount - Plastic Frame, for Superlux CMH8A/B/C/D/G Microphones
Product reference:HM26A
For Superlux CMH8A/B/C/D/G
And CMH8AH, CMH8BH, CMH8CH
Elastic suspension
Plastic frame
YA2 5/8" to 3/8" adapter supplied
Elastic shock mount with a plastic frame, designed for Superlux large-diaphragm microphones CMH8A, CMH8B, CMH8C, CMH8D and CMH8G, as well as CMH8AH, CMH8BH and CMH8CH. YA2 threaded adapter (5/8" to 3/8") supplied.
Elastic shock mount with a plastic frame, designed for Superlux large-diaphragm microphones CMH8A, CMH8B, CMH8C, CMH8D and CMH8G, as well as CMH8AH, CMH8BH and CMH8CH. YA2 threaded adapter (5/8" to 3/8") supplied.
For Superlux CMH8A/B/C/D/G
And CMH8AH, CMH8BH, CMH8CH
Elastic suspension
Plastic frame
YA2 5/8" to 3/8" adapter supplied
A shock mount for Superlux's CMH8 series large-diaphragm microphones: elastic suspension, plastic frame and YA2 adapter included.
Compatibility: CMH8A, CMH8B, CMH8C, CMH8D, CMH8G, CMH8AH, CMH8BH and CMH8CH
Role: damps the shocks and vibrations passed on by the stand before they reach the capsule
Fixing: on a microphone stand, YA2 5/8" to 3/8" zinc alloy threaded adapter
Colour: black
The mount designed by the brand for its own CMH8 microphones, to fit on a microphone stand.
In stock Warranty 1 year
144 DHincl. VAT
Order via WhatsApp — Superlux HM26A Shock Mount - Plastic Frame, for Superlux CMH8A/B/C/D/G Microphones
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 144,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM26A Shock Mount - Plastic Frame, for Superlux CMH8A/B/C/D/G Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT8178New
Audio-Technica AT8178 Foam Windscreen for 20 Series Microphones
Product reference:AT8178
Foam windscreen
Against plosives and wind
Protects the capsule
For AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP, AT2020USB+
Leaves controls and jacks accessible
A foam windscreen for 20 Series condenser microphones: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+. It reduces plosives and wind noise, protects the capsule and leaves the controls and jacks accessible.
A foam windscreen for 20 Series condenser microphones: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+. It reduces plosives and wind noise, protects the capsule and leaves the controls and jacks accessible.
Foam windscreen
Against plosives and wind
Protects the capsule
For AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP, AT2020USB+
Leaves controls and jacks accessible
A windscreen for 20 Series condenser microphones: foam, against plosives and wind and free access to controls.
Compatibility: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+
Role: reduces plosives and wind noise, helps protect the capsule
Mounting: slips over the microphone head without covering switches or jacks
Colour: black, with a smooth design that follows the shape of the microphone
Simple protection for close-miked voices with a 20 Series microphone.
In stock Warranty 1 year
205 DHincl. VAT
Order via WhatsApp — Audio-Technica AT8178 Foam Windscreen for 20 Series Microphones
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 205,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT8178 Foam Windscreen for 20 Series Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
Superlux
Product reference:MA91New
Superlux MA91 Pop Filter - Double-Layer Nylon, 185 mm Diameter, Gooseneck
Product reference:MA91
185 mm diameter screen
Double-layer nylon
8.5 mm diameter gooseneck
Screen adjustable through 180°
Clamp with anti-scratch pad
450 g
185 mm diameter pop filter with a double-layer nylon screen, on an 8.5 mm gooseneck with a microphone stand clamp. The screen adjusts through 180° and the clamp has an anti-scratch pad. 450 g.
185 mm diameter pop filter with a double-layer nylon screen, on an 8.5 mm gooseneck with a microphone stand clamp. The screen adjusts through 180° and the clamp has an anti-scratch pad. 450 g.
185 mm diameter screen
Double-layer nylon
8.5 mm diameter gooseneck
Screen adjustable through 180°
Clamp with anti-scratch pad
450 g
A large-diameter pop filter for vocals on a studio microphone: 185 mm screen, double-layer nylon and an adjustable gooseneck.
Screen: 185 mm (7.28") diameter, double-layer nylon fabric
Gooseneck: 8.5 mm diameter, screen adjustable through 180°
Fixing: clamp for a microphone stand, fitted with an anti-scratch pad
Weight: 450 g
A large screen that widely covers the front of the capsule, to record singing or speech without popping p and b sounds.
In stock Warranty 1 year
228 DHincl. VAT
Order via WhatsApp — Superlux MA91 Pop Filter - Double-Layer Nylon, 185 mm Diameter, Gooseneck
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 228,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux MA91 Pop Filter - Double-Layer Nylon, 185 mm Diameter, Gooseneck
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT8175New
Audio-Technica AT8175 Pop Filter for AT2020, AT2035 and AT2050 Microphones
Product reference:AT8175
Perforated steel grille
Clips onto the front of the mic
For AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+
Supplied as standard with the AT2020USB-XP
31.1 g
74 x 63 x 88 mm
A perforated steel pop filter that clips onto the front of 20 Series microphones: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+. It protects the recording from plosives without muffling the voice; 31.1 g, 74 x 63 x 88 mm.
A perforated steel pop filter that clips onto the front of 20 Series microphones: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+. It protects the recording from plosives without muffling the voice; 31.1 g, 74 x 63 x 88 mm.
Perforated steel grille
Clips onto the front of the mic
For AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+
Supplied as standard with the AT2020USB-XP
31.1 g
74 x 63 x 88 mm
A pop filter for 20 Series microphones: perforated steel grille, clip-on mounting and just 31.1 g.
Compatibility: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+
Role: protects the recording from plosives, the over-stressed "p" and "b" sounds
Mounting: clips onto the front of the microphone, with no stand or gooseneck
Format: 74 x 63 x 88 mm, black
The filter Audio-Technica supplies with the AT2020USB-XP, to equip the other microphones in the series.
In stock Warranty 1 year
246 DHincl. VAT
Order via WhatsApp — Audio-Technica AT8175 Pop Filter for AT2020, AT2035 and AT2050 Microphones
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 246,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT8175 Pop Filter for AT2020, AT2035 and AT2050 Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Superlux
Product reference:HM18AGNew
Superlux HM18AG Pop Filter - 2 Screens (Metal and Nylon), Gooseneck and Stand Clamp
Product reference:HM18AG
Two screens: steel mesh and nylon
Double layer on each screen
Gooseneck and clamp arm
5/8" connector on each screen
Mounts on a microphone stand
Does not dull the highs
Two-screen pop filter for vocals: one in steel mesh, the other in nylon, each double-layered. A gooseneck and a clamp arm fix it to the microphone stand. It stops plosives and spit without dulling the highs.
Two-screen pop filter for vocals: one in steel mesh, the other in nylon, each double-layered. A gooseneck and a clamp arm fix it to the microphone stand. It stops plosives and spit without dulling the highs.
Two screens: steel mesh and nylon
Double layer on each screen
Gooseneck and clamp arm
5/8" connector on each screen
Mounts on a microphone stand
Does not dull the highs
A pop filter for vocals on a condenser microphone, in the studio or at home: two screens, one in steel mesh, the other in nylon, each double-layered.
Role: stops plosives and spit without dulling the highs
Mounting: gooseneck and clamp arm on the microphone stand
Fixing: 5/8" threaded connector on each screen
Supplied: both screens, the gooseneck, the arm and its clamp
Two materials in one box, to keep the screen that suits the voice and the microphone.
In stock Warranty 1 year
246 DHincl. VAT
Order via WhatsApp — Superlux HM18AG Pop Filter - 2 Screens (Metal and Nylon), Gooseneck and Stand Clamp
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 246,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM18AG Pop Filter - 2 Screens (Metal and Nylon), Gooseneck and Stand Clamp
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Superlux
Product reference:PRA218ANew
Superlux PRA218A Kick Drum Dynamic Microphone - Supercardioid, Integrated Clip
Product reference:PRA218A
Designed for kick drum
Supercardioid dynamic
20 Hz to 12.5 kHz
134 dB SPL maximum
Integrated knob clip
Neodymium magnet
XLR output
A supercardioid dynamic microphone for kick drum, with low end extending down to 20 Hz and 134 dB SPL handling. Its knob clip is part of the microphone: it mounts on a stand with no extra part. YA2 adapter and pouch included.
A supercardioid dynamic microphone for kick drum, with low end extending down to 20 Hz and 134 dB SPL handling. Its knob clip is part of the microphone: it mounts on a stand with no extra part. YA2 adapter and pouch included.
Designed for kick drum
Supercardioid dynamic
20 Hz to 12.5 kHz
134 dB SPL maximum
Integrated knob clip
Neodymium magnet
XLR output
A dynamic microphone for kick drum and low-frequency instruments played loud: low end down to 20 Hz, 134 dB SPL handling and integrated knob clip.
Capture: response from 20 Hz to 12.5 kHz, supercardioid pattern, -53 dBV/Pa sensitivity
Output: neodymium magnet, 500 ohm impedance, XLR connector
Mounting: clip built into the body, screws onto a stand or boom
Supplied: YA2 thread adapter and pouch; XLR cable not included
Build: metal body, 43 x 120 mm, 210 g
A microphone that Superlux also includes in its DRKA3C2 and DRKA5C2 drum microphone kits.
In stock Warranty 1 year
246 DHincl. VAT
Order via WhatsApp — Superlux PRA218A Kick Drum Dynamic Microphone - Supercardioid, Integrated Clip
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 246,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux PRA218A Kick Drum Dynamic Microphone - Supercardioid, Integrated Clip
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
K&M
Product reference:23230-300-55New
Table microphone stand K&M 23230, trilobular base, height 152 mm - black (23230-300-55)
Product reference:23230-300-55
Fixed height 152 mm
Trilobular base Ø 137 mm
Anti-vibration rubber ring
3/8" thread
Microphone up to 1 kg
Steel, black powder coating
Weight 0.75 kg
Tool-free assembly
K&M 23230 table microphone stand: 137 mm steel trilobular base, fixed height of 152 mm and a rubber ring that filters noise transmitted by the table. For a microphone of up to 1 kg on a 3/8" clip, assembled by hand, without tools.
K&M 23230 table microphone stand: 137 mm steel trilobular base, fixed height of 152 mm and a rubber ring that filters noise transmitted by the table. For a microphone of up to 1 kg on a 3/8" clip, assembled by hand, without tools.
Fixed height 152 mm
Trilobular base Ø 137 mm
Anti-vibration rubber ring
3/8" thread
Microphone up to 1 kg
Steel, black powder coating
Weight 0.75 kg
Tool-free assembly
Table microphone stand for placing a microphone in front of you on a desk or table: steel trilobular base, anti-vibration ring and tool-free assembly.
Height: 152 mm, fixed
Base: trilobular, Ø 137 mm, rubber ring that filters knocks transmitted by the table
Microphone: 3/8" thread, up to 1 kg as a centred load
Weight: 0.75 kg, steel with black powder coating
A compact K&M table stand, without boom or height adjustment, that is assembled by hand in a few moves.
In stock Warranty 1 year
282 DHincl. VAT
Order via WhatsApp — Table microphone stand K&M 23230, trilobular base, height 152 mm - black (23230-300-55)
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 282,00 DH incl. VAT
In stock
Order via WhatsApp — Table microphone stand K&M 23230, trilobular base, height 152 mm - black (23230-300-55)
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year

Brands in Studio, Podcast & Music Production

Estimate the delivery time for your city:

WhatsAppMessage usChat