Browse the Audio-Technica range available at iris.ma, the tech expert in Morocco: prices in dirhams, live stock and delivery anywhere in Morocco.
Audio-Technica
Swapping cables takes a second: 3 m straight in the studio, coiled in the field. The 40 mm drivers with neodymium magnets reach up to 24 kHz, and the ear cups swivel 90° for one-ear monitoring.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
One earcup swivels 90° to listen with a single ear and keep the other on the booth, the DJ's gesture. Response reaches 22 kHz and isolation stays tight: the same model moves from mixing to tracking to the booth.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
45 mm drivers and response up to 28 kHz: precise bass, fine treble and a deep soundstage for critical listening. The thick leather earpads isolate enough that no monitoring bleeds into the microphone.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
A cardioid USB-C condenser microphone for streaming, podcasting and remote work: three-level noise reduction, automatic gain, up to 24-bit/192 kHz. Zero-latency headphone output, mic/computer mix; desk stand and pop filter included.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
Compact hypercardioid dynamic mic from the Artist series, designed for drums: toms, snares and percussion. Response from 30 Hz to 12 kHz, high sound pressure handled at close range, metal body; AT8665 drum mount and pouch included.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
An articulated microphone arm that clamps to the edge of a table, to free up the desk in the studio or for streaming. 5/8"-27 thread, full 360° rotation, 432 mm reach for a 1 kg load; table clamp and USB and XLR cable clips included.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
A foam windscreen for 20 Series condenser microphones: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+. It reduces plosives and wind noise, protects the capsule and leaves the controls and jacks accessible.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
A perforated steel pop filter that clips onto the front of 20 Series microphones: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+. It protects the recording from plosives without muffling the voice; 31.1 g, 74 x 63 x 88 mm.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
A UHF wireless system with a headworn mic: ATW-T1 bodypack transmitter, PRO 9cW cardioid headworn mic and half-rack ATW-R1 receiver. DE3 band (482 to 512 MHz), 60 m typical range, 10 h on 2 AA batteries; for presentations, fitness and the stage.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
Audio-Technica ATH-M70x closed-back monitor headphones, the flagship of the M-Series: 45 mm drivers, 5 to 40,000 Hz response, 90° swivelling earcups, three detachable cables and a semi-hard case, for mixing and mastering.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
Compact hypercardioid dynamic mic from the Artist series, designed for drums: toms, snares and percussion. Response from 30 Hz to 12 kHz, high sound pressure handled at close range, metal body; AT8665 drum mount and pouch included.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
An articulated microphone arm that clamps to the edge of a table, to free up the desk in the studio or for streaming. 5/8"-27 thread, full 360° rotation, 432 mm reach for a 1 kg load; table clamp and USB and XLR cable clips included.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
A foam windscreen for 20 Series condenser microphones: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+. It reduces plosives and wind noise, protects the capsule and leaves the controls and jacks accessible.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
A perforated steel pop filter that clips onto the front of 20 Series microphones: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+. It protects the recording from plosives without muffling the voice; 31.1 g, 74 x 63 x 88 mm.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
A UHF wireless system with a headworn mic: ATW-T1 bodypack transmitter, PRO 9cW cardioid headworn mic and half-rack ATW-R1 receiver. DE3 band (482 to 512 MHz), 60 m typical range, 10 h on 2 AA batteries; for presentations, fitness and the stage.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
Audio-Technica ATH-M70x closed-back monitor headphones, the flagship of the M-Series: 45 mm drivers, 5 to 40,000 Hz response, 90° swivelling earcups, three detachable cables and a semi-hard case, for mixing and mastering.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
Audio-Technica ATH-M50xBT2 Bluetooth headphones, the signature of the ATH-M50x studio headphones gone wireless: 45 mm drivers, LDAC codec, up to 50 h of battery life, multipoint, two mics for calls and the Audio-Technica Connect app.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
Audio-Technica ATH-M20xBT Bluetooth headphones, the signature of the ATH-M20x studio headphones gone wireless: 40 mm drivers, up to 60 h of battery life, multipoint, low latency mode and a 3.5 mm cable included for wired listening.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
Audio-Technica ATH-AVC200 closed-back wired headphones for music, films and the computer at home: 40 mm drivers, 20 to 22,000 Hz, 40 ohms, 3 m cable with a 3.5 mm mini-jack and a 6.35 mm adapter.
In stock
Delivery everywhereDelivered all over Morocco
Audio-Technica
Audio-Technica AT-XP7 DJ phono cartridge with dual moving magnet (VM), elliptical stylus and tapered aluminium cantilever: 6.0 mV output, 20 to 20,000 Hz, 22 dB separation. For DJ turntables with a half-inch mount.
In stock
Delivery everywhereDelivered all over Morocco
49 ref.references
Image 1 of 8
Audio-Technica
Product reference:ATH-M40XBest sellerNewProduct reference:ATH-M40X
Swapping cables takes a second: 3 m straight in the studio, coiled in the field. The 40 mm drivers with neodymium magnets reach up to 24 kHz, and the ear cups swivel 90° for one-ear monitoring.
Swapping cables takes a second: 3 m straight in the studio, coiled in the field. The 40 mm drivers with neodymium magnets reach up to 24 kHz, and the ear cups swivel 90° for one-ear monitoring.
Audio-Technica ATH-M40X closed-back monitoring headphones: a perfectly flat response for mixing and critical listening in the studio.
Sound: 40 mm drivers with neodymium magnets and CCAW voice coils, linear response over 15 Hz - 24 kHz with no boosted bass or flattering highs — the key to a mix that sounds right on every system.
Design: closed-back circumaural with 90° swivelling ear cups and a folding headband, which isolates from noise, limits bleed into the mic and allows single-ear monitoring.
Cable: two detachable cables — a 3 m straight cable for the studio, a 1.2-3 m coiled cable for work on location, swapped in a second on a gold-plated 3.5 mm mini-jack.
Also: 98 dB sensitivity, 35 ohm impedance, 1,600 mW maximum input power, 240 g weight, screw-on 6.35 mm adapter and carrying pouch included.
In stock Warranty 1 year
1 219 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 219,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 7
Audio-Technica
Product reference:ATH-M30XBest sellerNewProduct reference:ATH-M30X
One earcup swivels 90° to listen with a single ear and keep the other on the booth, the DJ's gesture. Response reaches 22 kHz and isolation stays tight: the same model moves from mixing to tracking to the booth.
One earcup swivels 90° to listen with a single ear and keep the other on the booth, the DJ's gesture. Response reaches 22 kHz and isolation stays tight: the same model moves from mixing to tracking to the booth.
Audio-Technica ATH-M30X closed-back monitoring headphones: the all-rounder that goes from studio to DJ booth without changing headphones, for mixing, recording and DJing.
Design: closed-back circumaural with 90° swivelling ear cups — for single-ear monitoring, one ear in the headphones and the other on the booth, as DJs like it, and careful passive isolation that blocks out noise when recording.
Sound: 40 mm drivers with neodymium magnets, CCAW voice coils and an extended 15 Hz - 22 kHz response: finer detail, well suited to mixing and mastering.
Cable: 3 m straight cable and 3.5 mm jack, supplied with a 6.35 mm screw-on adapter for audio interfaces and headphone amps.
Also: 96 dB sensitivity, 47 ohm impedance, 220 g weight, carrying pouch included.
In stock Warranty 1 year
859 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 859,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 8
Audio-Technica
Product reference:ATH-M50XBest sellerNewProduct reference:ATH-M50X
45 mm drivers and response up to 28 kHz: precise bass, fine treble and a deep soundstage for critical listening. The thick leather earpads isolate enough that no monitoring bleeds into the microphone.
45 mm drivers and response up to 28 kHz: precise bass, fine treble and a deep soundstage for critical listening. The thick leather earpads isolate enough that no monitoring bleeds into the microphone.
Reference studio headphones Audio-Technica ATH-M50X: a professional standard adopted by studios worldwide, from tracking to mixdown.
Sound: 45 mm drivers with neodymium magnets and CCAW voice coils, extended 15 Hz - 28 kHz response: precise bass, finely drawn treble and a deep soundstage for critical listening.
Design: closed circumaural with 90° swivelling earcups and thick leather earpads — passive isolation strong enough to keep monitoring from bleeding into the microphone.
Cable: three detachable cables supplied — 1.2 m straight, 3 m straight and 1.2-3 m coiled — to suit the studio as well as the street.
Also: 99 dB sensitivity, 38 ohm impedance, 285 g, gold-plated 3.5 mm mini-jack, screw-on 6.35 mm adapter and carrying pouch.
In stock Warranty 1 year
1 599 DHincl. VAT
Order via WhatsApp — Audio-Technica ATH-M50X — Industry-Standard Professional Studio Headphones
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 599,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica ATH-M50X — Industry-Standard Professional Studio Headphones
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 5
Audio-Technica
Product reference:AT2020USB-XPBlack FridayNew-4%Product reference:AT2020USB-XP
A cardioid USB-C condenser microphone for streaming, podcasting and remote work: three-level noise reduction, automatic gain, up to 24-bit/192 kHz. Zero-latency headphone output, mic/computer mix; desk stand and pop filter included.
A cardioid USB-C condenser microphone for streaming, podcasting and remote work: three-level noise reduction, automatic gain, up to 24-bit/192 kHz. Zero-latency headphone output, mic/computer mix; desk stand and pop filter included.
A USB condenser microphone for streaming, podcasting and remote work: 3-level noise reduction, automatic gain and zero-latency monitoring.
Capture: cardioid capsule, response from 20 Hz to 20 kHz, conversion up to 24-bit / 192 kHz
Controls: headphone volume, mic/computer mix and touch mute, on the microphone
Headphones: 3.5 mm jack, 110 mW into 32 ohms
Connection: USB-C, 2 m cable and USB-A to USB-C adapter, Windows and macOS
Supplied: desk stand and clip-on pop filter
The sound of the AT2020 over USB, with digital processing that makes any software unnecessary.
In stock Warranty 1 yearEnds in 1 d 14 h
2 082,00 DH incl. VAT-4%
1 995 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 995,00 DH incl. VAT, was 2 082,00 DH incl. VAT
In stock
Ends in 1 d 14 hDelivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 6
Audio-Technica
Product reference:ATM230NewProduct reference:ATM230
Compact hypercardioid dynamic mic from the Artist series, designed for drums: toms, snares and percussion. Response from 30 Hz to 12 kHz, high sound pressure handled at close range, metal body; AT8665 drum mount and pouch included.
Compact hypercardioid dynamic mic from the Artist series, designed for drums: toms, snares and percussion. Response from 30 Hz to 12 kHz, high sound pressure handled at close range, metal body; AT8665 drum mount and pouch included.
A dynamic drum microphone, placed as close as possible to toms and snare: hypercardioid pattern, compact design and AT8665 drum mount included.
Pickup: response from 30 Hz to 12 kHz, warm and full low end, crisp attack
Sources: toms, snares and other percussion, in the studio and on stage
Levels: handles high sound pressure at close range
Build: metal body, 82.5 mm long for 292 g
Connection: integral XLR output, no power required
Included: AT8665 mount, 5/8"-27 to 3/8"-16 thread adapter and soft pouch
Its tight pattern isolates the targeted drum and reduces what comes from the sides and rear.
In stock Warranty 1 year
1 794 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 794,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 5
Audio-Technica
Product reference:AT8700NewProduct reference:AT8700
An articulated microphone arm that clamps to the edge of a table, to free up the desk in the studio or for streaming. 5/8"-27 thread, full 360° rotation, 432 mm reach for a 1 kg load; table clamp and USB and XLR cable clips included.
An articulated microphone arm that clamps to the edge of a table, to free up the desk in the studio or for streaming. 5/8"-27 thread, full 360° rotation, 432 mm reach for a 1 kg load; table clamp and USB and XLR cable clips included.
An articulated microphone arm for the studio and streaming: table clamp, 360° rotation and 1 kg load.
Mounting: 5/8"-27 thread for a microphone or shock mount
Dimensions: 432 mm reach, 425 mm height
Desk: clamp for desktops up to 50 mm thick
Cables: USB and XLR cable clips supplied, to guide the cable along the arm
An arm that frees the desk and places the microphone in front of the mouth, instead of a desk stand.
In stock Warranty 1 year
822 DHincl. VAT
Order via WhatsApp — Audio-Technica AT8700 Articulated Microphone Boom Arm, Table Mount
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 822,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT8700 Articulated Microphone Boom Arm, Table Mount
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT8178NewProduct reference:AT8178
A foam windscreen for 20 Series condenser microphones: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+. It reduces plosives and wind noise, protects the capsule and leaves the controls and jacks accessible.
A foam windscreen for 20 Series condenser microphones: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+. It reduces plosives and wind noise, protects the capsule and leaves the controls and jacks accessible.
A windscreen for 20 Series condenser microphones: foam, against plosives and wind and free access to controls.
Compatibility: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+
Role: reduces plosives and wind noise, helps protect the capsule
Mounting: slips over the microphone head without covering switches or jacks
Colour: black, with a smooth design that follows the shape of the microphone
Simple protection for close-miked voices with a 20 Series microphone.
In stock Warranty 1 year
205 DHincl. VAT
Order via WhatsApp — Audio-Technica AT8178 Foam Windscreen for 20 Series Microphones
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 205,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT8178 Foam Windscreen for 20 Series Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT8175NewProduct reference:AT8175
A perforated steel pop filter that clips onto the front of 20 Series microphones: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+. It protects the recording from plosives without muffling the voice; 31.1 g, 74 x 63 x 88 mm.
A perforated steel pop filter that clips onto the front of 20 Series microphones: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+. It protects the recording from plosives without muffling the voice; 31.1 g, 74 x 63 x 88 mm.
A pop filter for 20 Series microphones: perforated steel grille, clip-on mounting and just 31.1 g.
Compatibility: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+
Role: protects the recording from plosives, the over-stressed "p" and "b" sounds
Mounting: clips onto the front of the microphone, with no stand or gooseneck
Format: 74 x 63 x 88 mm, black
The filter Audio-Technica supplies with the AT2020USB-XP, to equip the other microphones in the series.
In stock Warranty 1 year
246 DHincl. VAT
Order via WhatsApp — Audio-Technica AT8175 Pop Filter for AT2020, AT2035 and AT2050 Microphones
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 246,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT8175 Pop Filter for AT2020, AT2035 and AT2050 Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 4
Audio-Technica
Product reference:ATW-11/HDE3NewProduct reference:ATW-11/HDE3
A UHF wireless system with a headworn mic: ATW-T1 bodypack transmitter, PRO 9cW cardioid headworn mic and half-rack ATW-R1 receiver. DE3 band (482 to 512 MHz), 60 m typical range, 10 h on 2 AA batteries; for presentations, fitness and the stage.
A UHF wireless system with a headworn mic: ATW-T1 bodypack transmitter, PRO 9cW cardioid headworn mic and half-rack ATW-R1 receiver. DE3 band (482 to 512 MHz), 60 m typical range, 10 h on 2 AA batteries; for presentations, fitness and the stage.
A UHF wireless system to speak or sing hands-free: cardioid headworn mic, bodypack transmitter and half-rack receiver.
Frequencies: DE3 band, 482 to 492 MHz and 495 to 512 MHz, 2 groups of 4 channels
Mic: sweat-resistant PRO 9cW, adjustable headband, rotating boom, 54 g
Transmitter: ATW-T1, 10 mW, adjustable gain and -10 dB pad, up to 10 h on 2 AA batteries
Receiver: ATW-R1, antenna diversity, XLR and 6.35 mm jack outputs
Range: 60 m typical; supplied with case, rack kit, antennas and AC adapter
For presenters, fitness instructors and musicians who move while they speak.
In stock Warranty 1 year
3 000 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Price: 3 000,00 DH incl. VAT
In stock
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 8
Audio-Technica
Product reference:ATH-M70xNewProduct reference:ATH-M70x
Audio-Technica ATH-M70x closed-back monitor headphones, the flagship of the M-Series: 45 mm drivers, 5 to 40,000 Hz response, 90° swivelling earcups, three detachable cables and a semi-hard case, for mixing and mastering.
Audio-Technica ATH-M70x closed-back monitor headphones, the flagship of the M-Series: 45 mm drivers, 5 to 40,000 Hz response, 90° swivelling earcups, three detachable cables and a semi-hard case, for mixing and mastering.
Closed-back monitor headphones for mixing, mastering and sound recording: 5 to 40,000 Hz response, 45 mm drivers and 90° swivelling earcups.
Sound: 35 ohms, 97 dB, maximum input power of 2,000 mW
Cables: three detachable cables, 1.2 to 3 m coiled, 3 m and 1.2 m straight
Transport: folding headband, semi-hard case and cable pouch
Comfort: detachable over-ear pads, 280 g without cable or connector
The flagship of Audio-Technica's M-Series, tuned for accurate, balanced sound.
In stock Warranty 1 year
3 486 DHincl. VAT
Order via WhatsApp — Audio-Technica ATH-M70x Monitor Headphones - Closed-Back, 45 mm, 5 to 40,000 Hz
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Price: 3 486,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica ATH-M70x Monitor Headphones - Closed-Back, 45 mm, 5 to 40,000 Hz
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 8
Audio-Technica
Product reference:ATH-M50xBT2NewProduct reference:ATH-M50xBT2
Audio-Technica ATH-M50xBT2 Bluetooth headphones, the signature of the ATH-M50x studio headphones gone wireless: 45 mm drivers, LDAC codec, up to 50 h of battery life, multipoint, two mics for calls and the Audio-Technica Connect app.
Audio-Technica ATH-M50xBT2 Bluetooth headphones, the signature of the ATH-M50x studio headphones gone wireless: 45 mm drivers, LDAC codec, up to 50 h of battery life, multipoint, two mics for calls and the Audio-Technica Connect app.
Bluetooth headphones with studio sound for the commute, the office and calls: 45 mm drivers, LDAC codec and 50-hour battery.
Sound: 15 Hz to 28 kHz, AK4331 DAC and dedicated headphone amplifier
Wireless: Bluetooth 5.0, LDAC, AAC and SBC, multipoint on two devices, Google Fast Pair
Battery: up to 50 h, 10 min quick charge for up to 3 h of listening, USB-C port
Calls: two MEMS mics with beamforming, mic mute button
Settings: Audio-Technica Connect app (EQ, low latency, balance)
The wireless version of the ATH-M50x, with a 3.5 mm cable and pouch included for wired listening.
In stock Warranty 1 year
2 448 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 2 448,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 4
Audio-Technica
Product reference:ATH-M20xBTNewProduct reference:ATH-M20xBT
Audio-Technica ATH-M20xBT Bluetooth headphones, the signature of the ATH-M20x studio headphones gone wireless: 40 mm drivers, up to 60 h of battery life, multipoint, low latency mode and a 3.5 mm cable included for wired listening.
Audio-Technica ATH-M20xBT Bluetooth headphones, the signature of the ATH-M20x studio headphones gone wireless: 40 mm drivers, up to 60 h of battery life, multipoint, low latency mode and a 3.5 mm cable included for wired listening.
Bluetooth headphones for listening on the go with the M-Series sound: 60-hour battery, multipoint pairing and low latency mode.
Sound: 40 mm drivers, 5 Hz to 32 kHz, closed-back over-ear design
Wireless: Bluetooth 5.0, AAC and SBC codecs, two devices connected at once
Battery: up to 60 h, 10 min quick charge for up to 3 h of listening, USB-C port
Calls: built-in mic and buttons on the left earcup
Wired: 1.2 m 3.5 mm mini-jack cable included, to keep listening even with a flat battery
The wireless version of the ATH-M20x studio headphones, for everyday use, videos and games.
In stock Warranty 1 year
1 092 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 092,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
Audio-Technica
Product reference:ATH-AVC200NewProduct reference:ATH-AVC200
Audio-Technica ATH-AVC200 closed-back wired headphones for music, films and the computer at home: 40 mm drivers, 20 to 22,000 Hz, 40 ohms, 3 m cable with a 3.5 mm mini-jack and a 6.35 mm adapter.
Audio-Technica ATH-AVC200 closed-back wired headphones for music, films and the computer at home: 40 mm drivers, 20 to 22,000 Hz, 40 ohms, 3 m cable with a 3.5 mm mini-jack and a 6.35 mm adapter.
Closed-back wired headphones for music and films at home: 40 mm drivers, 3 m cable and ear pads that fully enclose the ears.
Sound: 20 Hz to 22 kHz, 40 ohms, 100 dB/mW, 500 mW maximum input power
Connection: gold-plated 3.5 mm mini-jack and 6.35 mm adapter included
Comfort: adjustable headband, wide headband arch, 210 g without cable
Design: closed-back, to limit sound leaking to the people around you
Simple, lightweight Audio-Technica headphones for the living room, the computer or the hi-fi system.
In stock Warranty 1 year
462 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 462,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT-XP7NewProduct reference:AT-XP7
Audio-Technica AT-XP7 DJ phono cartridge with dual moving magnet (VM), elliptical stylus and tapered aluminium cantilever: 6.0 mV output, 20 to 20,000 Hz, 22 dB separation. For DJ turntables with a half-inch mount.
Audio-Technica AT-XP7 DJ phono cartridge with dual moving magnet (VM), elliptical stylus and tapered aluminium cantilever: 6.0 mV output, 20 to 20,000 Hz, 22 dB separation. For DJ turntables with a half-inch mount.
DJ phono cartridge for turntables with a half-inch mount: dual moving magnet (VM), tapered aluminium cantilever and elliptical stylus.
Stylus: 0.3 × 0.7 mil bonded elliptical, stainless steel wire suspension
Sound: 6.0 mV output, 20 to 20,000 Hz, 22 dB channel separation
Setup: tracking force from 2 to 4 g, 3 g standard, recommended load 47 kΩ
Mounting: half-inch mount with two screws, screws, nuts and non-magnetic screwdriver included
Maintenance: ATN-XP7 replacement stylus
The elliptical stylus of the AT-XP5, with an aluminium cantilever, an extended response and a stronger output.
In stock Warranty 1 year
1 836 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 836,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT-XP5NewProduct reference:AT-XP5
Audio-Technica AT-XP5 DJ phono cartridge with dual moving magnet (VM) and bonded elliptical stylus: 5.5 mV output, 20 to 18,000 Hz, 2 to 4 g tracking force. For DJ turntables with a half-inch mount, with a stylus tip easy to see when cueing.
Audio-Technica AT-XP5 DJ phono cartridge with dual moving magnet (VM) and bonded elliptical stylus: 5.5 mV output, 20 to 18,000 Hz, 2 to 4 g tracking force. For DJ turntables with a half-inch mount, with a stylus tip easy to see when cueing.
DJ phono cartridge for turntables with a half-inch mount: dual moving magnet (VM), elliptical stylus and stylus tip easy to see when cueing.
Stylus: 0.3 × 0.7 mil bonded elliptical, carbon-fibre-reinforced ABS cantilever
Sound: 5.5 mV output, 20 to 18,000 Hz, 20 dB channel separation
Setup: tracking force from 2 to 4 g, 3 g standard, recommended load 47 kΩ
Mounting: half-inch mount with two screws, screws, nuts and non-magnetic screwdriver included
Maintenance: ATN-XP5 replacement stylus
Audio-Technica's elliptical DJ cartridge, between the conical-stylus AT-XP3 and the aluminium-cantilever AT-XP7.
In stock Warranty 1 year
912 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 912,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT-LP140XP-BKNewProduct reference:AT-LP140XP-BKNoir+1 more option
Noir+1 more option
Fully manual Audio-Technica DJ turntable with high-torque direct drive: 3 speeds, ± 8, 16 or 24 % pitch with quartz lock, reverse play and a pre-mounted AT-XP3 cartridge. Available in black or silver.
Fully manual Audio-Technica DJ turntable with high-torque direct drive: 3 speeds, ± 8, 16 or 24 % pitch with quartz lock, reverse play and a pre-mounted AT-XP3 cartridge. Available in black or silver.
Fully manual DJ turntable for mixing and demanding listening: high-torque direct drive, pitch up to ± 24 % and forward and reverse play.
Motor: direct drive, starting torque above 2.2 kgf·cm, wow and flutter below 0.2 % WRMS
Speeds: 33 1/3, 45 and 78 rpm, pitch ± 8 %, ± 16 % or ± 24 % with quartz lock
Tonearm: S-shaped, height-adjustable, tracking force from 0 to 4 g, adjustable anti-skate
Cartridge: AT-XP3 pre-mounted on the AT-HS6 headshell, 0.6 mil conical stylus
Output: 5.5 mV phono level through RCA terminals and a ground terminal, to a PHONO input
Handy: strobe, retractable stylus light, removable dust cover
Audio-Technica's direct-drive turntable for mixing on vinyl, in black or silver.
In stock Warranty 1 year
5 988 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Price: 5 988,00 DH incl. VAT
In stock
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT-LP140XP-SVNewProduct reference:AT-LP140XP-SVArgent+1 more option
Argent+1 more option
Fully manual Audio-Technica DJ turntable with high-torque direct drive: 3 speeds, ± 8, 16 or 24 % pitch with quartz lock, reverse play and a pre-mounted AT-XP3 cartridge. Available in black or silver.
Fully manual Audio-Technica DJ turntable with high-torque direct drive: 3 speeds, ± 8, 16 or 24 % pitch with quartz lock, reverse play and a pre-mounted AT-XP3 cartridge. Available in black or silver.
Fully manual DJ turntable for mixing and demanding listening: high-torque direct drive, pitch up to ± 24 % and forward and reverse play.
Motor: direct drive, starting torque above 2.2 kgf·cm, wow and flutter below 0.2 % WRMS
Speeds: 33 1/3, 45 and 78 rpm, pitch ± 8 %, ± 16 % or ± 24 % with quartz lock
Tonearm: S-shaped, height-adjustable, tracking force from 0 to 4 g, adjustable anti-skate
Cartridge: AT-XP3 pre-mounted on the AT-HS6 headshell, 0.6 mil conical stylus
Output: 5.5 mV phono level through RCA terminals and a ground terminal, to a PHONO input
Handy: strobe, retractable stylus light, removable dust cover
Audio-Technica's direct-drive turntable for mixing on vinyl, in black or silver.
In stock Warranty 1 year
5 988 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Price: 5 988,00 DH incl. VAT
In stock
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
Audio-Technica
Product reference:ATR3350xNewProduct reference:ATR3350x
An omnidirectional condenser lavalier microphone for video: it clips onto clothing and plugs, via a dual-mono 3.5 mm jack, into a camera, a DSLR or a recorder, the sound reaching both channels. 3 m cable, LR44 battery and switch on the housing.
An omnidirectional condenser lavalier microphone for video: it clips onto clothing and plugs, via a dual-mono 3.5 mm jack, into a camera, a DSLR or a recorder, the sound reaching both channels. 3 m cable, LR44 battery and switch on the housing.
A condenser lavalier microphone for video and recorders: omnidirectional, 3.5 mm jack plug and 3 m cable.
Connection: dual-mono plug, the voice reaches both channels of the 3.5 mm stereo input
Power: LR44 battery included, on/off switch on the in-line housing
Capture: response from 50 Hz to 18 kHz, -54 dB sensitivity
Supplied: clip, LR44 battery and foam windscreen
A 6 g presenter microphone, discreet in the frame, for camcorders, DSLRs or portable recorders.
In stock Warranty 1 year
396 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 396,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 6
Audio-Technica
Product reference:ATM650NewProduct reference:ATM650
A hypercardioid dynamic instrument microphone, voiced for guitar amps, snare drum and percussion. Its flat grille gets right up to the source and its floating double wall suppresses handling noise; XLR connection, no power required.
A hypercardioid dynamic instrument microphone, voiced for guitar amps, snare drum and percussion. Its flat grille gets right up to the source and its floating double wall suppresses handling noise; XLR connection, no power required.
A dynamic instrument microphone to place right up to the source: hypercardioid polar pattern, flat grille and floating double wall.
Capture: response from 80 Hz to 17 kHz, -56 dB sensitivity, 300 ohm impedance
Sources: guitar and bass amps, snare drum, toms, cymbals and percussion
Construction: neodymium magnet, multi-layer grille, double wall against handling noise
Connection: gold-plated XLR output, no power required
Supplied: AT8470 Quiet-Flex clamp, threaded adapter and pouch
A close-miking microphone that isolates the targeted instrument on a drum kit or a busy stage.
In stock Warranty 1 year
1 488 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 488,00 DH incl. VAT
In stock
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 6
Audio-Technica
Product reference:ATM510NewProduct reference:ATM510
A handheld cardioid dynamic microphone for vocals on stage. Neodymium magnet, internal shock mount against handling noise, multi-layer anti-pop grille and all-metal body; it connects over XLR with no power required, Quiet-Flex clamp included.
A handheld cardioid dynamic microphone for vocals on stage. Neodymium magnet, internal shock mount against handling noise, multi-layer anti-pop grille and all-metal body; it connects over XLR with no power required, Quiet-Flex clamp included.
A handheld dynamic microphone for vocals on stage: cardioid polar pattern, internal shock mount and all-metal body.
Capture: response from 90 Hz to 16 kHz, -55 dB sensitivity, 300 ohm impedance
Construction: neodymium magnet, multi-layer steel grille against plosives
Connection: gold-plated XLR output, no power required
Supplied: AT8470 Quiet-Flex clamp, 5/8"-27 to 3/8"-16 threaded adapter and pouch
A rugged vocal microphone built for the stage and for touring, which plugs into any mic input.
In stock Warranty 1 year
1 188 DHincl. VAT
Order via WhatsApp — Audio-Technica ATM510 Dynamic Microphone - Handheld, Cardioid, for Vocals
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 188,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica ATM510 Dynamic Microphone - Handheld, Cardioid, for Vocals
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 4
Audio-Technica
Product reference:AT2010NewProduct reference:AT2010
A handheld cardioid condenser microphone for vocals on stage: it uses the 16 mm diaphragm of the AT2020 studio microphone. Response from 40 Hz to 20 kHz, 136 dB SPL, multi-layer anti-pop grille; it needs 48 V phantom power and comes with its Quiet-Flex clamp.
A handheld cardioid condenser microphone for vocals on stage: it uses the 16 mm diaphragm of the AT2020 studio microphone. Response from 40 Hz to 20 kHz, 136 dB SPL, multi-layer anti-pop grille; it needs 48 V phantom power and comes with its Quiet-Flex clamp.
A handheld condenser microphone for vocals on stage: cardioid polar pattern, 16 mm diaphragm and anti-pop grille.
Capture: response from 40 Hz to 20 kHz, handles 136 dB SPL, -48 dB sensitivity
Capsule: the low-mass 16 mm diaphragm of the AT2020 studio microphone
Connection: gold-plated XLR output, 48 V phantom power required
Supplied: AT8470 Quiet-Flex clamp, 5/8"-27 to 3/8"-16 threaded adapter and pouch
For soloists, jazz vocals and houses of worship: the clarity of a studio microphone in a handheld format.
In stock Warranty 1 year
1 416 DHincl. VAT
Order via WhatsApp — Audio-Technica AT2010 Handheld Microphone - Cardioid Condenser for Vocals, XLR
✓ In stock · Delivered 7 – 12 Nov · Delivery 40 DH · Free pickup
Price: 1 416,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT2010 Handheld Microphone - Cardioid Condenser for Vocals, XLR
Delivery40 DH incl. VAT
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 6
Audio-Technica
Product reference:AT4050NewProduct reference:AT4050
A dual-diaphragm studio condenser microphone with three polar patterns: cardioid, omnidirectional and figure-of-eight. Transformerless, it handles 149 dB SPL with 17 dB of self-noise and serves vocals, piano, strings and amps; AT8449a shock mount included.
A dual-diaphragm studio condenser microphone with three polar patterns: cardioid, omnidirectional and figure-of-eight. Transformerless, it handles 149 dB SPL with 17 dB of self-noise and serves vocals, piano, strings and amps; AT8449a shock mount included.
A studio condenser microphone for vocals and instruments: dual diaphragm, three polar patterns and transformerless electronics.
Polar pattern: cardioid, omnidirectional or figure-of-eight, switchable on the body
Capture: response from 20 Hz to 18 kHz, handles 149 dB SPL, 17 dB SPL self-noise
Settings: -10 dB pad and 80 Hz high-pass filter
Connection: XLR output, 48 V phantom power required
Supplied: AT8449a shock mount, dust cover and protective case
The 40 Series multi-pattern microphone, hand-assembled, for vocals, piano, strings and amps.
In stock Warranty 1 year
8 166 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Price: 8 166,00 DH incl. VAT
In stock
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 6
Audio-Technica
Product reference:AT4040NewProduct reference:AT4040
A large-diaphragm cardioid studio condenser microphone with transformerless electronics. 12 dB SPL self-noise, 145 dB SPL handling, 80 Hz filter and -10 dB pad; it comes with the AT8449a shock mount, a dust cover and a protective case.
A large-diaphragm cardioid studio condenser microphone with transformerless electronics. 12 dB SPL self-noise, 145 dB SPL handling, 80 Hz filter and -10 dB pad; it comes with the AT8449a shock mount, a dust cover and a protective case.
A studio condenser microphone for recording vocals: large-diaphragm cardioid, 12 dB of self-noise and transformerless electronics.
Capture: response from 20 Hz to 20 kHz, -32 dB sensitivity, 133 dB dynamic range
Settings: -10 dB pad and 80 Hz high-pass filter, up to 155 dB SPL
Connection: XLR output, 48 V phantom power required, no cable supplied
Supplied: AT8449a shock mount, dust cover and protective case
An Audio-Technica 40 Series microphone with very low self-noise, for vocals in the studio.
In stock Warranty 1 year
5 070 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Price: 5 070,00 DH incl. VAT
In stock
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 5
Audio-Technica
Product reference:AT2050NewProduct reference:AT2050
A dual-diaphragm studio condenser microphone with three polar patterns: cardioid, omnidirectional and figure-of-eight. An 80 Hz filter, a -10 dB pad and 149 dB SPL handling suit it to vocals, piano, strings and amps, in the studio as on stage.
A dual-diaphragm studio condenser microphone with three polar patterns: cardioid, omnidirectional and figure-of-eight. An 80 Hz filter, a -10 dB pad and 149 dB SPL handling suit it to vocals, piano, strings and amps, in the studio as on stage.
A versatile studio condenser microphone for vocals and instruments: dual diaphragm, three polar patterns and handles 149 dB SPL.
Polar pattern: cardioid, omnidirectional or figure-of-eight, selected on the microphone body
Capture: response from 20 Hz to 20 kHz, 17 dB SPL self-noise, -42 dB sensitivity
Settings: -10 dB pad and 80 Hz high-pass filter, up to 159 dB SPL
Connection: XLR output, 11 to 52 V phantom power required
Supplied: AT8458 shock mount, threaded adapter and pouch
One microphone for a voice, a piano, strings or an amp, in the studio as on stage.
In stock Warranty 1 year
3 180 DHincl. VAT
✓ In stock · Delivered 7 – 12 Nov · Delivery free · Free pickup
Price: 3 180,00 DH incl. VAT
In stock
Deliveryfree
✓ In stock · Between Sat 7 Nov and Thu 12 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
