Skip to main content

Pay now View my order

Order by phone: (+212) 05 30 31 64 21WhatsApp

Microphone & Studio Accessories

· 25 references

Yellow Cable B35 Microphone Clip Thread Adapter, 5/8" to 3/8", Pack of 2Pack of two Yellow Cable metal thread adapters, to fit a microphone clip with a 5/8" thread on a microphone stand with a 3/8" thread.
- Pack of 2 adapters
- 5/8" clip on 3/8" stand
- Metal
39,00 DH incl. VAT
RTX SS01-PACK Speaker Stand (Pair), 35 mm Tubes, Height 1100 to 1680 mm, Carry BagPair of RTX black steel speaker stands supplied with their carry bag: 35 mm tubes of the standard diameter, height adjustable from 1100 to 1680 mm, folding tripods and a stated maximum load of 50 kg.
- Set of 2 stands and carry bag
- 35 mm tubes, the standard
- Height from 1100 to 1680 mm
1 146,00 DH incl. VAT
RTX AP01 Pop Filter with Gooseneck, 16 cm, Clamp for Microphone StandRTX pop filter with a 16 cm screen mounted on a gooseneck: it fixes with a screw clamp to the tube of a microphone stand and sits in front of the capsule to record vocals without the breath of « p » and « b » sounds. 0.5 kg, black metal.
- 16 cm diameter screen
- Adjustable gooseneck
- Screw clamp on the mic stand
354,00 DH incl. VAT
Quik Lok VSC/001 Gas Spring Monitor Arm, VESA 75 and 100, 17 to 32" ScreensQuik Lok gas spring monitor arm for a 17 to 32 inch screen with VESA 75 or 100: it fixes to the desk with a clamp (10 to 85 mm desktop) or through a grommet, raises the screen up to 38 cm, tilts it by ±35° and turns it to portrait.
- 17 to 32 inch screens
- VESA 75 x 75 and 100 x 100 mm
- Gas spring, up to 38 cm high
1 260,00 DH incl. VAT
Quik Lok A/302 BK Microphone Boom Stand, In-Sync Tripod Base, Height 97 to 163 cmQuik Lok 300 Microlite series microphone stand with a 77 cm fixed boom: height adjustable from 97 to 163 cm, In-Sync tripod base that locks with one of its legs, with no knob to tighten. Lightweight steel tubes, 1.65 kg and 92 cm when folded.
- Height from 97 to 163 cm
- 77 cm fixed boom
- In-Sync tripod, 72 cm leg spread
390,00 DH incl. VAT
Vicoustic MD55 Foam Acoustic Panel, 30 x 30 cm, sold individuallyA small 30 x 30 cm polyurethane foam acoustic panel, 55 mm thick, NRC 0.60, most effective in the mid and high frequencies. It is glued to the wall or ceiling, on its own or in a pattern, and sold individually.
- 300 x 300 x 55 mm foam panel
- NRC 0.60
- Mid and high frequencies, α = 0.90 at 4000 Hz
99,00 DH incl. VAT

25 ref.references

Sort by

Image 1 of 2
Yellow Cable
Product reference:B35New
Yellow Cable B35 Microphone Clip Thread Adapter, 5/8" to 3/8", Pack of 2
Product reference:B35
Pack of 2 adapters
5/8" clip on 3/8" stand
Metal
Sold in a blister pack
Pack of two Yellow Cable metal thread adapters, to fit a microphone clip with a 5/8" thread on a microphone stand with a 3/8" thread.
Pack of two Yellow Cable metal thread adapters, to fit a microphone clip with a 5/8" thread on a microphone stand with a 3/8" thread.
Pack of 2 adapters
5/8" clip on 3/8" stand
Metal
Sold in a blister pack
A thread adapter to fit a microphone clip on a stand with a different thread: 5/8" clip on a 3/8" stand, in metal, sold in pairs.
Threads: 5/8" on the clip side · 3/8" on the stand, boom or desk stand side
Contents: 2 adapters in a blister pack
Material: metal
The small part that saves you from changing clip or stand when the microphone and its support do not share the same thread.
In stock Warranty 1 year
39 DHincl. VAT
Order via WhatsApp — Yellow Cable B35 Microphone Clip Thread Adapter, 5/8" to 3/8", Pack of 2
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 39,00 DH incl. VAT
In stock
Order via WhatsApp — Yellow Cable B35 Microphone Clip Thread Adapter, 5/8" to 3/8", Pack of 2
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
K&M
Product reference:21700-000-29New
Thread adapter K&M 217 for microphones, 3/8" female to 5/8" male - zinc-plated (21700-000-29)
Product reference:21700-000-29
3/8" female thread
5/8"-27 male thread
5/8" clip on a 3/8" stand
Zinc-plated steel
Weight 11 g
K&M 217 thread adapter in zinc-plated steel: 3/8" female thread on one side, 5/8"-27 male thread on the other. Screwed into a 5/8" microphone clip or holder, it lets you fit it on a stand with a 3/8" screw.
K&M 217 thread adapter in zinc-plated steel: 3/8" female thread on one side, 5/8"-27 male thread on the other. Screwed into a 5/8" microphone clip or holder, it lets you fit it on a stand with a 3/8" screw.
3/8" female thread
5/8"-27 male thread
5/8" clip on a 3/8" stand
Zinc-plated steel
Weight 11 g
Thread adapter for fitting a 5/8" microphone clip on a 3/8" stand screw: 3/8" female thread, 5/8"-27 male thread and zinc-plated steel.
Threads: 3/8" female inside, 5/8"-27 male outside
Material: zinc-plated steel, 11 g
Fitting: screws by hand into the clip, which then screws onto the stand
Contents: 1 adapter, K&M reference 21700-000-29
The small part that saves changing clips when the stand and the microphone do not share the same screw thread.
In stock Warranty 1 year
50 DHincl. VAT
Order via WhatsApp — Thread adapter K&M 217 for microphones, 3/8" female to 5/8" male - zinc-plated (21700-000-29)
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 50,00 DH incl. VAT
In stock
Order via WhatsApp — Thread adapter K&M 217 for microphones, 3/8" female to 5/8" male - zinc-plated (21700-000-29)
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 4
Vicoustic
Product reference:B00017New
Vicoustic MD55 Foam Acoustic Panel, 30 x 30 cm, sold individually
Product reference:B00017
300 x 300 x 55 mm foam panel
NRC 0.60
Mid and high frequencies, α = 0.90 at 4000 Hz
Installed on its own or in a pattern
Glued to the wall or ceiling
80 g per panel
Sold individually
A small 30 x 30 cm polyurethane foam acoustic panel, 55 mm thick, NRC 0.60, most effective in the mid and high frequencies. It is glued to the wall or ceiling, on its own or in a pattern, and sold individually.
A small 30 x 30 cm polyurethane foam acoustic panel, 55 mm thick, NRC 0.60, most effective in the mid and high frequencies. It is glued to the wall or ceiling, on its own or in a pattern, and sold individually.
300 x 300 x 55 mm foam panel
NRC 0.60
Mid and high frequencies, α = 0.90 at 4000 Hz
Installed on its own or in a pattern
Glued to the wall or ceiling
80 g per panel
Sold individually
A small foam acoustic panel to treat a studio, a rehearsal room or a home cinema: the Vicoustic MD55 is glued on its own or in a pattern on walls as well as ceilings.
Absorption: NRC 0.60, mainly in the mid and high frequencies, up to α = 0.90 at 4,000 Hz
Material: polyurethane foam with raised ridges
Size: 300 x 300 mm, 55 mm thick, 80 g
Mounting: Flexi Glue Ultra adhesive, sold separately
Sold individually: order as many as the surface to cover requires.
In stock Warranty 3 years
99 DHincl. VAT
Order via WhatsApp — Vicoustic MD55 Foam Acoustic Panel, 30 x 30 cm, sold individually
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 99,00 DH incl. VAT
In stock
Order via WhatsApp — Vicoustic MD55 Foam Acoustic Panel, 30 x 30 cm, sold individually
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
3 years
Image 1 of 4
Superlux
Product reference:HM26BNew
Superlux HM26B Shock Mount - Plastic Frame, for 22 to 26 mm Diameter Microphones
Product reference:HM26B
Microphones 22 to 26 mm in diameter
Elastic suspension
Plastic frame
YA2 5/8" to 3/8" adapter supplied
Elastic shock mount with a plastic frame for a microphone whose body is 22 to 26 mm in diameter. It screws onto a microphone stand; the YA2 threaded adapter (5/8" to 3/8") is supplied.
Elastic shock mount with a plastic frame for a microphone whose body is 22 to 26 mm in diameter. It screws onto a microphone stand; the YA2 threaded adapter (5/8" to 3/8") is supplied.
Microphones 22 to 26 mm in diameter
Elastic suspension
Plastic frame
YA2 5/8" to 3/8" adapter supplied
A shock mount for a slim microphone, 22 to 26 mm in diameter: elastic suspension, plastic frame and threaded adapter included.
Compatibility: microphones whose body is 22 to 26 mm in diameter
Role: damps the shocks and vibrations passed on by the stand before they reach the capsule
Fixing: on a microphone stand, YA2 5/8" to 3/8" zinc alloy threaded adapter
Colour: black
Measure the microphone body before choosing: a wider large-diaphragm microphone needs another mount.
In stock Warranty 1 year
124 DHincl. VAT
Order via WhatsApp — Superlux HM26B Shock Mount - Plastic Frame, for 22 to 26 mm Diameter Microphones
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 124,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM26B Shock Mount - Plastic Frame, for 22 to 26 mm Diameter Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Superlux
Product reference:HM26ANew
Superlux HM26A Shock Mount - Plastic Frame, for Superlux CMH8A/B/C/D/G Microphones
Product reference:HM26A
For Superlux CMH8A/B/C/D/G
And CMH8AH, CMH8BH, CMH8CH
Elastic suspension
Plastic frame
YA2 5/8" to 3/8" adapter supplied
Elastic shock mount with a plastic frame, designed for Superlux large-diaphragm microphones CMH8A, CMH8B, CMH8C, CMH8D and CMH8G, as well as CMH8AH, CMH8BH and CMH8CH. YA2 threaded adapter (5/8" to 3/8") supplied.
Elastic shock mount with a plastic frame, designed for Superlux large-diaphragm microphones CMH8A, CMH8B, CMH8C, CMH8D and CMH8G, as well as CMH8AH, CMH8BH and CMH8CH. YA2 threaded adapter (5/8" to 3/8") supplied.
For Superlux CMH8A/B/C/D/G
And CMH8AH, CMH8BH, CMH8CH
Elastic suspension
Plastic frame
YA2 5/8" to 3/8" adapter supplied
A shock mount for Superlux's CMH8 series large-diaphragm microphones: elastic suspension, plastic frame and YA2 adapter included.
Compatibility: CMH8A, CMH8B, CMH8C, CMH8D, CMH8G, CMH8AH, CMH8BH and CMH8CH
Role: damps the shocks and vibrations passed on by the stand before they reach the capsule
Fixing: on a microphone stand, YA2 5/8" to 3/8" zinc alloy threaded adapter
Colour: black
The mount designed by the brand for its own CMH8 microphones, to fit on a microphone stand.
In stock Warranty 1 year
144 DHincl. VAT
Order via WhatsApp — Superlux HM26A Shock Mount - Plastic Frame, for Superlux CMH8A/B/C/D/G Microphones
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 144,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM26A Shock Mount - Plastic Frame, for Superlux CMH8A/B/C/D/G Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT8178New
Audio-Technica AT8178 Foam Windscreen for 20 Series Microphones
Product reference:AT8178
Foam windscreen
Against plosives and wind
Protects the capsule
For AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP, AT2020USB+
Leaves controls and jacks accessible
A foam windscreen for 20 Series condenser microphones: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+. It reduces plosives and wind noise, protects the capsule and leaves the controls and jacks accessible.
A foam windscreen for 20 Series condenser microphones: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+. It reduces plosives and wind noise, protects the capsule and leaves the controls and jacks accessible.
Foam windscreen
Against plosives and wind
Protects the capsule
For AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP, AT2020USB+
Leaves controls and jacks accessible
A windscreen for 20 Series condenser microphones: foam, against plosives and wind and free access to controls.
Compatibility: AT2020, AT2035, AT2050, AT2020USB-X, AT2020USB-XP and AT2020USB+
Role: reduces plosives and wind noise, helps protect the capsule
Mounting: slips over the microphone head without covering switches or jacks
Colour: black, with a smooth design that follows the shape of the microphone
Simple protection for close-miked voices with a 20 Series microphone.
In stock Warranty 1 year
205 DHincl. VAT
Order via WhatsApp — Audio-Technica AT8178 Foam Windscreen for 20 Series Microphones
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 205,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT8178 Foam Windscreen for 20 Series Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
Superlux
Product reference:MA91New
Superlux MA91 Pop Filter - Double-Layer Nylon, 185 mm Diameter, Gooseneck
Product reference:MA91
185 mm diameter screen
Double-layer nylon
8.5 mm diameter gooseneck
Screen adjustable through 180°
Clamp with anti-scratch pad
450 g
185 mm diameter pop filter with a double-layer nylon screen, on an 8.5 mm gooseneck with a microphone stand clamp. The screen adjusts through 180° and the clamp has an anti-scratch pad. 450 g.
185 mm diameter pop filter with a double-layer nylon screen, on an 8.5 mm gooseneck with a microphone stand clamp. The screen adjusts through 180° and the clamp has an anti-scratch pad. 450 g.
185 mm diameter screen
Double-layer nylon
8.5 mm diameter gooseneck
Screen adjustable through 180°
Clamp with anti-scratch pad
450 g
A large-diameter pop filter for vocals on a studio microphone: 185 mm screen, double-layer nylon and an adjustable gooseneck.
Screen: 185 mm (7.28") diameter, double-layer nylon fabric
Gooseneck: 8.5 mm diameter, screen adjustable through 180°
Fixing: clamp for a microphone stand, fitted with an anti-scratch pad
Weight: 450 g
A large screen that widely covers the front of the capsule, to record singing or speech without popping p and b sounds.
In stock Warranty 1 year
228 DHincl. VAT
Order via WhatsApp — Superlux MA91 Pop Filter - Double-Layer Nylon, 185 mm Diameter, Gooseneck
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 228,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux MA91 Pop Filter - Double-Layer Nylon, 185 mm Diameter, Gooseneck
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Audio-Technica
Product reference:AT8175New
Audio-Technica AT8175 Pop Filter for AT2020, AT2035 and AT2050 Microphones
Product reference:AT8175
Perforated steel grille
Clips onto the front of the mic
For AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+
Supplied as standard with the AT2020USB-XP
31.1 g
74 x 63 x 88 mm
A perforated steel pop filter that clips onto the front of 20 Series microphones: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+. It protects the recording from plosives without muffling the voice; 31.1 g, 74 x 63 x 88 mm.
A perforated steel pop filter that clips onto the front of 20 Series microphones: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+. It protects the recording from plosives without muffling the voice; 31.1 g, 74 x 63 x 88 mm.
Perforated steel grille
Clips onto the front of the mic
For AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+
Supplied as standard with the AT2020USB-XP
31.1 g
74 x 63 x 88 mm
A pop filter for 20 Series microphones: perforated steel grille, clip-on mounting and just 31.1 g.
Compatibility: AT2020, AT2020USB-X, AT2035, AT2050 and AT2020USB+
Role: protects the recording from plosives, the over-stressed "p" and "b" sounds
Mounting: clips onto the front of the microphone, with no stand or gooseneck
Format: 74 x 63 x 88 mm, black
The filter Audio-Technica supplies with the AT2020USB-XP, to equip the other microphones in the series.
In stock Warranty 1 year
246 DHincl. VAT
Order via WhatsApp — Audio-Technica AT8175 Pop Filter for AT2020, AT2035 and AT2050 Microphones
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 246,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT8175 Pop Filter for AT2020, AT2035 and AT2050 Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Superlux
Product reference:HM18AGNew
Superlux HM18AG Pop Filter - 2 Screens (Metal and Nylon), Gooseneck and Stand Clamp
Product reference:HM18AG
Two screens: steel mesh and nylon
Double layer on each screen
Gooseneck and clamp arm
5/8" connector on each screen
Mounts on a microphone stand
Does not dull the highs
Two-screen pop filter for vocals: one in steel mesh, the other in nylon, each double-layered. A gooseneck and a clamp arm fix it to the microphone stand. It stops plosives and spit without dulling the highs.
Two-screen pop filter for vocals: one in steel mesh, the other in nylon, each double-layered. A gooseneck and a clamp arm fix it to the microphone stand. It stops plosives and spit without dulling the highs.
Two screens: steel mesh and nylon
Double layer on each screen
Gooseneck and clamp arm
5/8" connector on each screen
Mounts on a microphone stand
Does not dull the highs
A pop filter for vocals on a condenser microphone, in the studio or at home: two screens, one in steel mesh, the other in nylon, each double-layered.
Role: stops plosives and spit without dulling the highs
Mounting: gooseneck and clamp arm on the microphone stand
Fixing: 5/8" threaded connector on each screen
Supplied: both screens, the gooseneck, the arm and its clamp
Two materials in one box, to keep the screen that suits the voice and the microphone.
In stock Warranty 1 year
246 DHincl. VAT
Order via WhatsApp — Superlux HM18AG Pop Filter - 2 Screens (Metal and Nylon), Gooseneck and Stand Clamp
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 246,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM18AG Pop Filter - 2 Screens (Metal and Nylon), Gooseneck and Stand Clamp
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
K&M
Product reference:23230-300-55New
Table microphone stand K&M 23230, trilobular base, height 152 mm - black (23230-300-55)
Product reference:23230-300-55
Fixed height 152 mm
Trilobular base Ø 137 mm
Anti-vibration rubber ring
3/8" thread
Microphone up to 1 kg
Steel, black powder coating
Weight 0.75 kg
Tool-free assembly
K&M 23230 table microphone stand: 137 mm steel trilobular base, fixed height of 152 mm and a rubber ring that filters noise transmitted by the table. For a microphone of up to 1 kg on a 3/8" clip, assembled by hand, without tools.
K&M 23230 table microphone stand: 137 mm steel trilobular base, fixed height of 152 mm and a rubber ring that filters noise transmitted by the table. For a microphone of up to 1 kg on a 3/8" clip, assembled by hand, without tools.
Fixed height 152 mm
Trilobular base Ø 137 mm
Anti-vibration rubber ring
3/8" thread
Microphone up to 1 kg
Steel, black powder coating
Weight 0.75 kg
Tool-free assembly
Table microphone stand for placing a microphone in front of you on a desk or table: steel trilobular base, anti-vibration ring and tool-free assembly.
Height: 152 mm, fixed
Base: trilobular, Ø 137 mm, rubber ring that filters knocks transmitted by the table
Microphone: 3/8" thread, up to 1 kg as a centred load
Weight: 0.75 kg, steel with black powder coating
A compact K&M table stand, without boom or height adjustment, that is assembled by hand in a few moves.
In stock Warranty 1 year
282 DHincl. VAT
Order via WhatsApp — Table microphone stand K&M 23230, trilobular base, height 152 mm - black (23230-300-55)
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 282,00 DH incl. VAT
In stock
Order via WhatsApp — Table microphone stand K&M 23230, trilobular base, height 152 mm - black (23230-300-55)
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 4
RTX
Product reference:AP01New
RTX AP01 Pop Filter with Gooseneck, 16 cm, Clamp for Microphone Stand
Product reference:AP01
16 cm diameter screen
Adjustable gooseneck
Screw clamp on the mic stand
Black metal, 0.5 kg
Mic and stand not included
RTX pop filter with a 16 cm screen mounted on a gooseneck: it fixes with a screw clamp to the tube of a microphone stand and sits in front of the capsule to record vocals without the breath of « p » and « b » sounds. 0.5 kg, black metal.
RTX pop filter with a 16 cm screen mounted on a gooseneck: it fixes with a screw clamp to the tube of a microphone stand and sits in front of the capsule to record vocals without the breath of « p » and « b » sounds. 0.5 kg, black metal.
16 cm diameter screen
Adjustable gooseneck
Screw clamp on the mic stand
Black metal, 0.5 kg
Mic and stand not included
A pop filter for vocal recording in the studio, for podcasts or in the home studio: a 16 cm screen on a gooseneck with a screw clamp for the microphone stand.
Role: slowing the breath of « p » and « b » sounds before they reach the microphone diaphragm
Adjustment: gooseneck bent by hand, to the millimetre
Mounting: screw clamp on the microphone stand tube
Build: metal, black finish · 0.5 kg
Supplied: the filter, its gooseneck and its clamp; microphone and stand not included
The simple accessory that saves you from redoing a vocal take ruined by a plosive.
In stock Warranty 1 year
354 DHincl. VAT
Order via WhatsApp — RTX AP01 Pop Filter with Gooseneck, 16 cm, Clamp for Microphone Stand
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 354,00 DH incl. VAT
In stock
Order via WhatsApp — RTX AP01 Pop Filter with Gooseneck, 16 cm, Clamp for Microphone Stand
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
Superlux
Product reference:MS108ENew
Superlux MS108E Boom Microphone Stand - 80 cm Boom, 90 to 160 cm Height
Product reference:MS108E
Height from 90 to 160 cm
80 cm boom
Tripod, plastic base
Iron and plastic
5/8" to 3/8" adapter supplied
2 kg
Boom microphone stand adjustable from 90 to 160 cm in height, with an 80 cm boom and a tripod with a plastic base. Iron and plastic, 2 kg. A 5/8" to 3/8" thread adapter is supplied.
Boom microphone stand adjustable from 90 to 160 cm in height, with an 80 cm boom and a tripod with a plastic base. Iron and plastic, 2 kg. A 5/8" to 3/8" thread adapter is supplied.
Height from 90 to 160 cm
80 cm boom
Tripod, plastic base
Iron and plastic
5/8" to 3/8" adapter supplied
2 kg
A boom microphone stand for the stage, rehearsals and the home studio: 90 to 160 cm height, 80 cm boom and a tripod with a plastic base.
Height: from 90 to 160 cm
Boom: 80 cm, to bring the microphone towards the voice, the instrument or the amp
Fixing: 5/8" to 3/8" thread adapter included
Build: iron and plastic, 2 kg
Supplied with its thread adapter; the MS108E/BAG version, sold separately, adds a canvas carrying bag.
In stock Warranty 1 year
360 DHincl. VAT
Order via WhatsApp — Superlux MS108E Boom Microphone Stand - 80 cm Boom, 90 to 160 cm Height
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 360,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux MS108E Boom Microphone Stand - 80 cm Boom, 90 to 160 cm Height
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 7
Quik Lok
Product reference:A302BKNew
Quik Lok A/302 BK Microphone Boom Stand, In-Sync Tripod Base, Height 97 to 163 cm
Product reference:A302BK
Height from 97 to 163 cm
77 cm fixed boom
In-Sync tripod, 72 cm leg spread
Angle and reach with one knob
Microlite steel, 1.65 kg
92 cm folded
EU version (European thread)
Cable clips included
Quik Lok 300 Microlite series microphone stand with a 77 cm fixed boom: height adjustable from 97 to 163 cm, In-Sync tripod base that locks with one of its legs, with no knob to tighten. Lightweight steel tubes, 1.65 kg and 92 cm when folded.
Quik Lok 300 Microlite series microphone stand with a 77 cm fixed boom: height adjustable from 97 to 163 cm, In-Sync tripod base that locks with one of its legs, with no knob to tighten. Lightweight steel tubes, 1.65 kg and 92 cm when folded.
Height from 97 to 163 cm
77 cm fixed boom
In-Sync tripod, 72 cm leg spread
Angle and reach with one knob
Microlite steel, 1.65 kg
92 cm folded
EU version (European thread)
Cable clips included
A microphone boom stand for the stage, rehearsals and the home studio: height from 97 to 163 cm, 77 cm fixed boom and an In-Sync tripod with no knob to tighten.
Adjustments: boom angle and reach set with a single knob · height set by a soft-grip clutch
Base: polycarbonate tripod, locked by the leg marked in orange · 72 cm leg spread
Build: Microlite steel tubes, ABS boom swivel · 1.65 kg
Transport: 92 cm folded · microphone cable clips included
Finish: baked-on, non-reflective black enamel · EU version with European thread
The boom stand of the Quik Lok 300 Microlite series, to hold a vocal or instrument microphone at the right height.
In stock Warranty 1 year
390 DHincl. VAT
Order via WhatsApp — Quik Lok A/302 BK Microphone Boom Stand, In-Sync Tripod Base, Height 97 to 163 cm
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 390,00 DH incl. VAT
In stock
Order via WhatsApp — Quik Lok A/302 BK Microphone Boom Stand, In-Sync Tripod Base, Height 97 to 163 cm
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
Superlux
Product reference:HM7New
Superlux HM7 Shock Mount - M22 × 1 Thread, Champagne Silver, for Superlux CMH8A/B/C/D/G Microphones
Product reference:HM7
For Superlux CMH8A/B/C/D/G
And CMH8AH, CMH8BH, CMH8CH
M22 × 1 thread
Champagne silver
YA2 5/8" to 3/8" adapter supplied
Champagne silver elastic shock mount for a large-diaphragm condenser microphone, which screws in through an M22 × 1 thread. Designed for Superlux CMH8A, CMH8B, CMH8C, CMH8D, CMH8G, CMH8AH, CMH8BH and CMH8CH. YA2 adapter supplied.
Champagne silver elastic shock mount for a large-diaphragm condenser microphone, which screws in through an M22 × 1 thread. Designed for Superlux CMH8A, CMH8B, CMH8C, CMH8D, CMH8G, CMH8AH, CMH8BH and CMH8CH. YA2 adapter supplied.
For Superlux CMH8A/B/C/D/G
And CMH8AH, CMH8BH, CMH8CH
M22 × 1 thread
Champagne silver
YA2 5/8" to 3/8" adapter supplied
A shock mount for Superlux's CMH8 series large-diaphragm condenser microphones: M22 × 1 thread, elastic suspension and a champagne silver finish.
Compatibility: CMH8A, CMH8B, CMH8C, CMH8D, CMH8G, CMH8AH, CMH8BH and CMH8CH (not the CMH8K)
Microphone fixing: it screws onto the M22 × 1 (22 mm) thread
Stand fixing: YA2 5/8" to 3/8" threaded adapter included
Role: isolates the microphone from vibrations passed on by the stand
The champagne silver mount into which the CMH8 microphone screws directly.
In stock Warranty 1 year
462 DHincl. VAT
Order via WhatsApp — Superlux HM7 Shock Mount - M22 × 1 Thread, Champagne Silver, for Superlux CMH8A/B/C/D/G Microphones
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 462,00 DH incl. VAT
In stock
Order via WhatsApp — Superlux HM7 Shock Mount - M22 × 1 Thread, Champagne Silver, for Superlux CMH8A/B/C/D/G Microphones
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
K&M
Product reference:27105-300-55New
Boom microphone stand K&M 27105, height 90 to 160 cm, folding tripod - black (27105-300-55)
Product reference:27105-300-55
Height 90 to 160 cm
805 mm one-piece boom
Boom tilts from +90° to -90°
Tripod with folding legs
3/8" thread
Microphones up to 1 kg
Weight 2.32 kg
Folded: 105 x 85 x 960 mm
2 built-in cable holders
K&M 27105 boom microphone stand: height adjustable from 90 to 160 cm, 805 mm one-piece boom tilting from +90° to -90°, tripod with folding legs and fibreglass-reinforced plastic socket. 3/8" thread, microphones up to 1 kg, 2.32 kg.
K&M 27105 boom microphone stand: height adjustable from 90 to 160 cm, 805 mm one-piece boom tilting from +90° to -90°, tripod with folding legs and fibreglass-reinforced plastic socket. 3/8" thread, microphones up to 1 kg, 2.32 kg.
Height 90 to 160 cm
805 mm one-piece boom
Boom tilts from +90° to -90°
Tripod with folding legs
3/8" thread
Microphones up to 1 kg
Weight 2.32 kg
Folded: 105 x 85 x 960 mm
2 built-in cable holders
Boom microphone stand for vocals and instruments, in rehearsal as in the studio: height 900 to 1,600 mm, 805 mm boom and folding tripod.
Height: 900 to 1,600 mm, set with a clamping sleeve
Boom: one-piece, 805 mm, tilts from +90° to -90°, locked by a wing nut
Base: tripod with folding legs, fibreglass-reinforced plastic socket
Microphone: 3/8" thread, load up to 1 kg, 2 cable holders
Transport: folded to 105 x 85 x 960 mm, 2.32 kg
K&M's entry-level boom stand, with the adjustments of a stage stand at a weight that is easy to carry.
In stock Warranty 1 year
629 DHincl. VAT
Order via WhatsApp — Boom microphone stand K&M 27105, height 90 to 160 cm, folding tripod - black (27105-300-55)
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 629,00 DH incl. VAT
In stock
Order via WhatsApp — Boom microphone stand K&M 27105, height 90 to 160 cm, folding tripod - black (27105-300-55)
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
K&M
Product reference:23320-300-55New
Table microphone stand K&M 23320, round cast-iron base, height 23.5 to 36.5 cm - black (23320-300-55)
Product reference:23320-300-55
Height 235 to 365 mm
Cast-iron base Ø 250 mm
Anti-vibration rubber ring
Clamping sleeve adjustment
3/8" thread
Weight 2.6 kg
Cable holder Ø 20 mm
For table or floor
K&M 23320 low microphone stand: heavy 250 mm round cast-iron base, height adjustable from 235 to 365 mm with a clamping sleeve and a rubber ring that filters vibrations. For miking amps or percussion, or as a stable table stand.
K&M 23320 low microphone stand: heavy 250 mm round cast-iron base, height adjustable from 235 to 365 mm with a clamping sleeve and a rubber ring that filters vibrations. For miking amps or percussion, or as a stable table stand.
Height 235 to 365 mm
Cast-iron base Ø 250 mm
Anti-vibration rubber ring
Clamping sleeve adjustment
3/8" thread
Weight 2.6 kg
Cable holder Ø 20 mm
For table or floor
Low microphone stand for miking amps and percussion, or placed on a table: round cast-iron base, adjustable height and anti-vibration ring.
Height: 235 to 365 mm, set steplessly with a clamping sleeve
Base: cast iron, Ø 250 mm, EPDM rubber ring that filters footstep noise
Microphone: 3/8" thread, microphones or similar devices
Weight: 2.6 kg, 20 mm cable holder on the tube
A short stand with a heavy base, designed by K&M for stability when the microphone has to stay close to a low source.
In stock Warranty 1 year
699 DHincl. VAT
Order via WhatsApp — Table microphone stand K&M 23320, round cast-iron base, height 23.5 to 36.5 cm - black (23320-300-55)
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 699,00 DH incl. VAT
In stock
Order via WhatsApp — Table microphone stand K&M 23320, round cast-iron base, height 23.5 to 36.5 cm - black (23320-300-55)
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 5
Audio-Technica
Product reference:AT8700New
Audio-Technica AT8700 Articulated Microphone Boom Arm, Table Mount
Product reference:AT8700
Articulated arm with table clamp
5/8"-27 thread
Full 360° rotation
432 mm reach, 425 mm height
Load up to 1 kg
Desktop up to 50 mm thick
USB and XLR cable clips included
An articulated microphone arm that clamps to the edge of a table, to free up the desk in the studio or for streaming. 5/8"-27 thread, full 360° rotation, 432 mm reach for a 1 kg load; table clamp and USB and XLR cable clips included.
An articulated microphone arm that clamps to the edge of a table, to free up the desk in the studio or for streaming. 5/8"-27 thread, full 360° rotation, 432 mm reach for a 1 kg load; table clamp and USB and XLR cable clips included.
Articulated arm with table clamp
5/8"-27 thread
Full 360° rotation
432 mm reach, 425 mm height
Load up to 1 kg
Desktop up to 50 mm thick
USB and XLR cable clips included
An articulated microphone arm for the studio and streaming: table clamp, 360° rotation and 1 kg load.
Mounting: 5/8"-27 thread for a microphone or shock mount
Dimensions: 432 mm reach, 425 mm height
Desk: clamp for desktops up to 50 mm thick
Cables: USB and XLR cable clips supplied, to guide the cable along the arm
An arm that frees the desk and places the microphone in front of the mouth, instead of a desk stand.
In stock Warranty 1 year
822 DHincl. VAT
Order via WhatsApp — Audio-Technica AT8700 Articulated Microphone Boom Arm, Table Mount
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 822,00 DH incl. VAT
In stock
Order via WhatsApp — Audio-Technica AT8700 Articulated Microphone Boom Arm, Table Mount
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 2
PreSonus
Product reference:2777800109New
PreSonus SHK-2 Shock Mount for Revelator Microphone
Product reference:2777800109
Designed for the PreSonus Revelator microphone
Isolates from vibrations and handling
Metal construction
Spare elastic cord included
Rigid stand mount included
Metal shock mount tailored to the PreSonus Revelator microphone: it isolates the mic from knocks on the desk, keyboard strokes and handling. A spare elastic cord and a rigid stand mount are included.
Metal shock mount tailored to the PreSonus Revelator microphone: it isolates the mic from knocks on the desk, keyboard strokes and handling. A spare elastic cord and a rigid stand mount are included.
Designed for the PreSonus Revelator microphone
Isolates from vibrations and handling
Metal construction
Spare elastic cord included
Rigid stand mount included
A shock mount for the Revelator microphone, for streaming, podcasting or recording at the desk: the PreSonus SHK-2 offers a custom fit, metal construction and a spare cord.
Role: isolates the mic from keyboard strokes, knocks on the table and handling noise
Compatibility: PreSonus Revelator microphone
Material: metal, black finish
Included: spare elastic cord and rigid stand mount
The part that rids a Revelator placed near the keyboard of the rumble passed on by the desk.
In stock Warranty 2 years
840 DHincl. VAT
Order via WhatsApp — PreSonus SHK-2 Shock Mount for Revelator Microphone
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 840,00 DH incl. VAT
In stock
Order via WhatsApp — PreSonus SHK-2 Shock Mount for Revelator Microphone
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
2 years
Image 1 of 4
Vicoustic
Product reference:U06581New
Vicoustic Flexi Screen Lite v2 Microphone Isolation Shield (sold individually)
Product reference:U06581
Polyurethane foam acoustic shield
More pronounced curve than the first version
Microphone socket for EU and US standards
Mounts in under 15 seconds
Vertical or horizontal on a stand
402 x 245 x 383 mm, 0.50 kg
Sold individually, stand not included
A foam acoustic shield that surrounds the microphone to reduce room noise. This v2 version has a more pronounced curve and a socket compatible with EU and US standard microphones; it mounts on a stand in under 15 seconds.
A foam acoustic shield that surrounds the microphone to reduce room noise. This v2 version has a more pronounced curve and a socket compatible with EU and US standard microphones; it mounts on a stand in under 15 seconds.
Polyurethane foam acoustic shield
More pronounced curve than the first version
Microphone socket for EU and US standards
Mounts in under 15 seconds
Vertical or horizontal on a stand
402 x 245 x 383 mm, 0.50 kg
Sold individually, stand not included
A foam acoustic shield that isolates a microphone from room noise: the Vicoustic Flexi Screen Lite v2 wraps around the microphone and mounts in under 15 seconds.
Shape: a more pronounced curve than the first version, to surround the microphone
Material: acoustic polyurethane foam with cavities that enhance absorption and support the joint
Microphone: redesigned socket, compatible with EU and US standard microphones
Mounting: on a microphone stand (not included), vertically or horizontally
Size: 402 x 245 x 383 mm, 0.50 kg · sold individually
A lightweight shield designed for recording on location, in design studios or in classrooms.
In stock Warranty 3 years
909 DHincl. VAT
Order via WhatsApp — Vicoustic Flexi Screen Lite v2 Microphone Isolation Shield (sold individually)
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 909,00 DH incl. VAT
In stock
Order via WhatsApp — Vicoustic Flexi Screen Lite v2 Microphone Isolation Shield (sold individually)
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
3 years
Image 1 of 7
K&M
Product reference:19790-316-55New
Tablet holder K&M 19790 for microphone stands, width 222 to 334 mm, 3/8" thread - black (19790-316-55)
Product reference:19790-316-55
Tablets 222 to 334 mm wide
Height 128 to 232 mm
Thickness 6 to 11 mm
Tilt from 0 to 90°
Landscape / portrait rotation
Snap lock
3/8" female thread
PA-6 polyamide
K&M 19790 tablet holder that screws onto a 3/8" microphone stand: tablets 222 to 334 mm wide, 128 to 232 mm high and 6 to 11 mm thick, tilt from 0 to 90° and 90° rotation between landscape and portrait.
K&M 19790 tablet holder that screws onto a 3/8" microphone stand: tablets 222 to 334 mm wide, 128 to 232 mm high and 6 to 11 mm thick, tilt from 0 to 90° and 90° rotation between landscape and portrait.
Tablets 222 to 334 mm wide
Height 128 to 232 mm
Thickness 6 to 11 mm
Tilt from 0 to 90°
Landscape / portrait rotation
Snap lock
3/8" female thread
PA-6 polyamide
Tablet holder for microphone stands, for reading, writing or watching a video on stage, in rehearsal or at home: adjustable arms, landscape/portrait rotation and snap lock.
Tablets: 222 to 334 mm wide, 128 to 232 mm high, 6 to 11 mm thick
Compatible: iPad, iPad Air, iPad Pro, Galaxy Tab from 9.7", Surface and Surface Pro
Orientation: tilt from 0 to 90°, 90° rotation between landscape and portrait
Mounting: 3/8" female thread, screws onto the microphone stand
Material: PA-6 polyamide, zinc-plated steel screws
A universal holder, tied to no tablet brand, that stays adjusted so the tablet goes in and out in one move.
In stock Warranty 1 year
912 DHincl. VAT
Order via WhatsApp — Tablet holder K&M 19790 for microphone stands, width 222 to 334 mm, 3/8" thread - black (19790-316-55)
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 912,00 DH incl. VAT
In stock
Order via WhatsApp — Tablet holder K&M 19790 for microphone stands, width 222 to 334 mm, 3/8" thread - black (19790-316-55)
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
K&M
Product reference:23840-300-55New
Microphone boom arm K&M 23840 with desk clamp, 82 cm reach, 0.8 kg load - black (23840-300-55)
Product reference:23840-300-55
Reach up to 820 mm
Length 460 to 960 mm
Load up to 0.8 kg
3/8" and 5/8" connectors
Clamp for board or tube up to 51 mm
Spring-loaded arms, 3 knurled nuts
4 cable clips included
Weight 1.4 kg
K&M 23840 spring-loaded microphone arm: desk clamp for a board or tube up to 51 mm, reach up to 820 mm, 3/8" and 5/8" connectors and a load of up to 0.8 kg. For the studio and the multimedia workstation, supplied without cable with 4 clips.
K&M 23840 spring-loaded microphone arm: desk clamp for a board or tube up to 51 mm, reach up to 820 mm, 3/8" and 5/8" connectors and a load of up to 0.8 kg. For the studio and the multimedia workstation, supplied without cable with 4 clips.
Reach up to 820 mm
Length 460 to 960 mm
Load up to 0.8 kg
3/8" and 5/8" connectors
Clamp for board or tube up to 51 mm
Spring-loaded arms, 3 knurled nuts
4 cable clips included
Weight 1.4 kg
Articulated microphone arm for the recording studio and the multimedia workstation: desk clamp, spring-loaded arms and 3/8" and 5/8" connectors.
Reach: up to 820 mm, length 460 to 960 mm
Load: 0.8 kg in total, microphone, tablet or smartphone
Mounting: clamp for a board or tube up to 51 mm, table flange or wall mount available as options
Adjustment: spring-loaded arms, 3 knurled nuts at the joints
Cabling: supplied without cable, 4 clips included
An arm that frees the work surface and puts the microphone within speaking distance, instead of a table stand.
In stock Warranty 1 year
1 146 DHincl. VAT
Order via WhatsApp — Microphone boom arm K&M 23840 with desk clamp, 82 cm reach, 0.8 kg load - black (23840-300-55)
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 1 146,00 DH incl. VAT
In stock
Order via WhatsApp — Microphone boom arm K&M 23840 with desk clamp, 82 cm reach, 0.8 kg load - black (23840-300-55)
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Vicoustic
Product reference:B05765New
Vicoustic Wavewood Ultra Lite Acoustic Panel, Locarno Cherry, 59.5 x 59.5 cm, sold individually
Product reference:B05765
NRC 0.75, αw 0.75 (class C)
Peak absorption at 1000 Hz (α = 1.00)
Designed for mid frequencies
MDF and high-pressure laminate front
Locarno Cherry finish
595 x 595 x 44 mm, 1.65 kg
Glued to the wall or ceiling
Sold individually
A 59.5 x 59.5 cm wooden acoustic panel in Locarno Cherry that mainly absorbs mid frequencies: NRC 0.75 and αw 0.75 (class C). Grooved MDF and high-pressure laminate front, polyurethane foam behind, glued in place. Sold individually.
A 59.5 x 59.5 cm wooden acoustic panel in Locarno Cherry that mainly absorbs mid frequencies: NRC 0.75 and αw 0.75 (class C). Grooved MDF and high-pressure laminate front, polyurethane foam behind, glued in place. Sold individually.
NRC 0.75, αw 0.75 (class C)
Peak absorption at 1000 Hz (α = 1.00)
Designed for mid frequencies
MDF and high-pressure laminate front
Locarno Cherry finish
595 x 595 x 44 mm, 1.65 kg
Glued to the wall or ceiling
Sold individually
A wooden acoustic panel to tame reverberation in a studio, a living room or a home cinema: the Vicoustic Wavewood Ultra Lite mainly absorbs mid frequencies.
Absorption: NRC 0.75, αw 0.75 (class C), up to α = 1.00 at 1,000 Hz
Construction: grooved front in MDF and high-pressure laminate, polyurethane foam behind
Finish: Locarno Cherry
Size: 595 x 595 mm, 44 mm thick, 1.65 kg
Mounting: glued to the wall or ceiling, Flexi Glue Ultra adhesive sold separately
Sold individually, so you can order exactly the number of panels your room needs.
In stock Warranty 3 years
1 146 DHincl. VAT
Order via WhatsApp — Vicoustic Wavewood Ultra Lite Acoustic Panel, Locarno Cherry, 59.5 x 59.5 cm, sold individually
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 1 146,00 DH incl. VAT
In stock
Order via WhatsApp — Vicoustic Wavewood Ultra Lite Acoustic Panel, Locarno Cherry, 59.5 x 59.5 cm, sold individually
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
3 years
RTX
Product reference:SS01-PACKNew
RTX SS01-PACK Speaker Stand (Pair), 35 mm Tubes, Height 1100 to 1680 mm, Carry Bag
Product reference:SS01-PACK
Set of 2 stands and carry bag
35 mm tubes, the standard
Height from 1100 to 1680 mm
50 kg maximum load
Folding steel tripods
7.8 kg for the set
Pair of RTX black steel speaker stands supplied with their carry bag: 35 mm tubes of the standard diameter, height adjustable from 1100 to 1680 mm, folding tripods and a stated maximum load of 50 kg.
Pair of RTX black steel speaker stands supplied with their carry bag: 35 mm tubes of the standard diameter, height adjustable from 1100 to 1680 mm, folding tripods and a stated maximum load of 50 kg.
Set of 2 stands and carry bag
35 mm tubes, the standard
Height from 1100 to 1680 mm
50 kg maximum load
Folding steel tripods
7.8 kg for the set
A pair of speaker stands for the sound system of a party, a rehearsal or a conference: 35 mm tubes of the standard diameter, 1100 to 1680 mm high and a carry bag included.
Contents: 2 stands and 1 carry bag
Load: 50 kg maximum stated
Compatibility: speakers with a pole socket for a 35 mm tube
Build: black steel, folding tripods
Transport: 7.8 kg for the set · 990 x 220 x 120 mm carton
A ready-to-use pair to raise two PA speakers, stored in a single bag.
In stock Warranty 1 year
1 146 DHincl. VAT
Order via WhatsApp — RTX SS01-PACK Speaker Stand (Pair), 35 mm Tubes, Height 1100 to 1680 mm, Carry Bag
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 1 146,00 DH incl. VAT
In stock
Order via WhatsApp — RTX SS01-PACK Speaker Stand (Pair), 35 mm Tubes, Height 1100 to 1680 mm, Carry Bag
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 8
Quik Lok
Product reference:VSC001New
Quik Lok VSC/001 Gas Spring Monitor Arm, VESA 75 and 100, 17 to 32" Screens
Product reference:VSC001
17 to 32 inch screens
VESA 75 x 75 and 100 x 100 mm
Gas spring, up to 38 cm high
Tilt from +35° to -35°
VESA plate rotation ±90°
10 to 85 mm clamp or grommet
35 mm pole, cables routed
Detachable VESA plate
Quik Lok gas spring monitor arm for a 17 to 32 inch screen with VESA 75 or 100: it fixes to the desk with a clamp (10 to 85 mm desktop) or through a grommet, raises the screen up to 38 cm, tilts it by ±35° and turns it to portrait.
Quik Lok gas spring monitor arm for a 17 to 32 inch screen with VESA 75 or 100: it fixes to the desk with a clamp (10 to 85 mm desktop) or through a grommet, raises the screen up to 38 cm, tilts it by ±35° and turns it to portrait.
17 to 32 inch screens
VESA 75 x 75 and 100 x 100 mm
Gas spring, up to 38 cm high
Tilt from +35° to -35°
VESA plate rotation ±90°
10 to 85 mm clamp or grommet
35 mm pole, cables routed
Detachable VESA plate
A gas spring monitor arm for the office or the home studio: 17 to 32 inch screens, VESA 75 and 100 mounting and fitting with a desk clamp or grommet.
Adjustments: screen up to 38 cm above the desk · tilt from +35° to -35° · ±90° rotation for portrait mode
Joints: ±180° at the arm joints · ±135° around the 35 mm pole
Mounting: clamp for a 10 to 85 mm desktop · grommet for a 10 to 40 mm desktop
Cables: flange at the base of the arm and clip along the pole
Supplied: detachable VESA plate, fixings, 4 and 6 mm Allen keys
It replaces the screen's original stand and clears the worktop, with the screen floating above the desk.
In stock Warranty 1 year
1 260 DHincl. VAT
Order via WhatsApp — Quik Lok VSC/001 Gas Spring Monitor Arm, VESA 75 and 100, 17 to 32" Screens
✓ In stock · Delivered 29 Sept – 3 Oct · Delivery 40 DH · Free pickup
Price: 1 260,00 DH incl. VAT
In stock
Order via WhatsApp — Quik Lok VSC/001 Gas Spring Monitor Arm, VESA 75 and 100, 17 to 32" Screens
Delivery40 DH incl. VAT
✓ In stock · Between Tue 29 Sept and Sat 3 Oct
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year

Brands in Microphone & Studio Accessories

Estimate the delivery time for your city:

WhatsAppMessage usChat