Accessories for Access Points and Switches

· 8 references

A professional Wi-Fi access point is often sold without its mounting bracket, and an industrial switch without its power supply: these are separate part numbers, specific to one product range and rarely compatible from one manufacturer to another. It is better to order them together with the equipment than once the installation is under way.

View all

Aruba AP-MNT-D Campus Access Point Mount Kit (R3J18A)Compatible with Aruba 510 series access points, for mounting on a wall, on a ceiling or on any flat surface.
- Compatible with Aruba 510 series access points
- Wall, ceiling or flat surface mounting
314,00 DH incl. VAT
-5%HPE Aruba AP-220-MNT-W1W Wall Mount, White (JW047A)Mounting designed for a wall as much as a ceiling, in a light shade that makes it disappear once the Aruba access point is in place.
- Wall or ceiling mounting
- Designed for Aruba access points
- Discreet white shade
251,00 DH incl. VAT264,00 DH incl. VAT
Cisco 1U rack-mount kit for Catalyst 2960 and 2960-S (RCKMNT-1RU)Cisco RCKMNT-1RU rack-mount kit: the brackets and their screws to install a one-rack-unit Catalyst 2960 or 2960-S switch in a 19-inch or 24-inch rack, or to replace lost brackets.
- For Catalyst 2960 and 2960-S
- 19-inch and 24-inch racks
- 1U high
2 118,00 DH incl. VAT
HPE Aruba AP-270-MNT-V1 wall and pole mount kit for outdoor access points (JW052A)Aruba AP-270-MNT-V1 long-arm vertical bracket to install an Aruba outdoor access point on a pole or against a wall. The arm keeps the unit away from the mast to limit RF shadowing. Screws, hose clamps and a cable tie are included; wall anchors are not.
- Pole or wall
- Long arm
- AP-270, AP-360, AP-370, AP-560, AP-570 series
1 140,00 DH incl. VAT
Reyee PSU 120W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA120-54)Fanless cooling, so it is silent and has no wearing parts. It takes 90 to 264 V at the input, works from -40 to +70 °C and clips onto a DIN rail in the technical cabinet.
- Output 52.38 to 55.62 V DC, 2.2 A
- Wide input 90 to 264 V AC, 50/60 Hz
- Passive cooling, fanless
615,00 DH incl. VAT
Reyee PSU 240W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA240-54)Powering a heavily loaded industrial switch calls for headroom: 4.4 A output at 54 V. Passive cooling, metal housing and DIN rail mounting, for operation from -40 to +70 °C.
- Output 52.38 to 55.62 V DC, 4.4 A
- Wide input 90 to 264 V AC, 50/60 Hz
- Passive cooling, fanless
959,00 DH incl. VAT

View all

8 ref.references

Sort by

Image 1 of 2
HPE
Product reference:JW047ABlack Friday-5%
HPE Aruba AP-220-MNT-W1W Wall Mount, White (JW047A)
Product reference:JW047A
Wall or ceiling mounting
Designed for Aruba access points
Discreet white shade
Simple installation
Mounting designed for a wall as much as a ceiling, in a light shade that makes it disappear once the Aruba access point is in place.
Mounting designed for a wall as much as a ceiling, in a light shade that makes it disappear once the Aruba access point is in place.
Wall or ceiling mounting
Designed for Aruba access points
Discreet white shade
Simple installation
Optimise your network with the HPE Aruba AP-220-MNT-W1W wall mount. Designed for easy installation on a wall or ceiling, this kit offers a robust solution for your access points. Its white colour blends discreetly into any environment. Improve the reach of your connections and enjoy seamless connectivity with this reliable, easy-to-install mount.
In stock Warranty 1 yearEnds in 1 d 22 h
264,00 DH incl. VAT-5%
251 DHincl. VAT
Order via WhatsApp — HPE Aruba AP-220-MNT-W1W Wall Mount, White (JW047A)
✓ In stock · Delivered 9 – 13 Nov · Delivery 40 DH · Free pickup
Price: 251,00 DH incl. VAT, was 264,00 DH incl. VAT
In stock
Ends in 1 d 22 h
Order via WhatsApp — HPE Aruba AP-220-MNT-W1W Wall Mount, White (JW047A)
Delivery40 DH incl. VAT
✓ In stock · Between Mon 9 Nov and Fri 13 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
HPE
Product reference:R3J18A
Aruba AP-MNT-D Campus Access Point Mount Kit (R3J18A)
Product reference:R3J18A
Compatible with Aruba 510 series access points
Wall, ceiling or flat surface mounting
Compatible with Aruba 510 series access points, for mounting on a wall, on a ceiling or on any flat surface.
Compatible with Aruba 510 series access points, for mounting on a wall, on a ceiling or on any flat surface.
Compatible with Aruba 510 series access points
Wall, ceiling or flat surface mounting
Streamline your network installation with the Aruba AP-MNT-D Campus Access Point Mount Kit. Designed for demanding professional environments, this mount provides a firm, secure fixing on walls, ceilings or flat surfaces. Compatible with Aruba 510 series access points, it integrates discreetly and neatly while maintaining optimal Wi-Fi performance. Easy to install, this kit combines sturdiness and practicality, offering a durable solution for stable, secure connectivity. Ideal for businesses, schools or campuses that want a reliable, well-organised network infrastructure.
In stock Warranty 1 year
314 DHincl. VAT
Order via WhatsApp — Aruba AP-MNT-D Campus Access Point Mount Kit (R3J18A)
✓ In stock · Delivered 9 – 13 Nov · Delivery 40 DH · Free pickup
Price: 314,00 DH incl. VAT
In stock
Order via WhatsApp — Aruba AP-MNT-D Campus Access Point Mount Kit (R3J18A)
Delivery40 DH incl. VAT
✓ In stock · Between Mon 9 Nov and Fri 13 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 7
Ubiquiti
Product reference:ETH-SP-G2
Ubiquiti ETH-SP-G2 Outdoor Ethernet Surge Protection (10kA)
Product reference:ETH-SP-G2
Discharge current of 10 kA and above
Protects 10/100/1000 Mbps links
Passes 802.3af PoE power through
Striking voltage 90 V DC, 700 V pulse
Two female RJ45 connectors, no power and no configuration
IPX5 weatherproof polycarbonate housing
Mast mounting with an earthing screw
Operates from -30 to 65 °C
80 g
Two RJ45 sockets to insert on the cable, one near the antenna and the other at the building entry: discharges go to earth instead of reaching the equipment. Screws onto an earthed mast, with no setting up.
Two RJ45 sockets to insert on the cable, one near the antenna and the other at the building entry: discharges go to earth instead of reaching the equipment. Screws onto an earthed mast, with no setting up.
Discharge current of 10 kA and above
Protects 10/100/1000 Mbps links
Passes 802.3af PoE power through
Striking voltage 90 V DC, 700 V pulse
Two female RJ45 connectors, no power and no configuration
IPX5 weatherproof polycarbonate housing
Mast mounting with an earthing screw
Operates from -30 to 65 °C
80 g
Protect your outdoor Ethernet equipment with Ubiquiti's Outdoor Ethernet Surge Protection. Designed for high-speed networks, this accessory offers effective ESD protection, able to handle a discharge current of up to 20kA. With two passive RJ45 connections and quick, easy installation, it is also compatible with 10 GbE networks, ensuring optimal performance. Its rugged polycarbonate design and weather protection (IPX5) make it an ideal choice for demanding outdoor environments.
In stock Warranty 1 year
419 DHincl. VAT
Order via WhatsApp — Ubiquiti ETH-SP-G2 Outdoor Ethernet Surge Protection (10kA)
✓ In stock · Delivered 9 – 13 Nov · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 419,00 DH incl. VAT
In stock
Order via WhatsApp — Ubiquiti ETH-SP-G2 Outdoor Ethernet Surge Protection (10kA)
Delivery40 DH incl. VAT
✓ In stock · Between Mon 9 Nov and Fri 13 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 3
Ruijie
Product reference:RG-NIS-PA120-54
Reyee PSU 120W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA120-54)
Product reference:RG-NIS-PA120-54
Output 52.38 to 55.62 V DC, 2.2 A
Wide input 90 to 264 V AC, 50/60 Hz
Passive cooling, fanless
Operation from -40 °C to +70 °C
Short-circuit, overcurrent, overvoltage and overheating protection
Surge protection: 4 kV common mode, 2 kV differential mode
ESD protection 8 kV air, 6 kV contact
DIN rail mounting
Metal housing
LED indicator for voltage presence
MTBF above 150,000 hours
Fanless cooling, so it is silent and has no wearing parts. It takes 90 to 264 V at the input, works from -40 to +70 °C and clips onto a DIN rail in the technical cabinet.
Fanless cooling, so it is silent and has no wearing parts. It takes 90 to 264 V at the input, works from -40 to +70 °C and clips onto a DIN rail in the technical cabinet.
Output 52.38 to 55.62 V DC, 2.2 A
Wide input 90 to 264 V AC, 50/60 Hz
Passive cooling, fanless
Operation from -40 °C to +70 °C
Short-circuit, overcurrent, overvoltage and overheating protection
Surge protection: 4 kV common mode, 2 kV differential mode
ESD protection 8 kV air, 6 kV contact
DIN rail mounting
Metal housing
LED indicator for voltage presence
MTBF above 150,000 hours
Designed to deliver reliable power in the most demanding environments, the Reyee PSU 120W industrial power supply keeps your RG-NIS2100 switch running without compromise. Its stable 52.38–55.62 V DC output ensures consistent performance, even in extreme conditions. Thanks to its fanless design, it runs silently while reducing maintenance. Built-in protection against overvoltage, short circuits and 8 kV ESD discharges safeguards your critical equipment. DIN rail compatible, CE certified and with an MTBF of over 150,000 hours, it is a durable, professional choice for demanding industrial networks.
In stock Warranty 1 year
615 DHincl. VAT
Order via WhatsApp — Reyee PSU 120W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA120-54)
✓ In stock · Delivered 9 – 13 Nov · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 615,00 DH incl. VAT
In stock
Order via WhatsApp — Reyee PSU 120W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA120-54)
Delivery40 DH incl. VAT
✓ In stock · Between Mon 9 Nov and Fri 13 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 4
Ruijie
Product reference:RG-NIS-PA240-54
Reyee PSU 240W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA240-54)
Product reference:RG-NIS-PA240-54
Output 52.38 to 55.62 V DC, 4.4 A
Wide input 90 to 264 V AC, 50/60 Hz
Passive cooling, fanless
Operation from -40 °C to +70 °C
Short-circuit, overcurrent, overvoltage and overheating protection
Surge protection: 4 kV common mode, 2 kV differential mode
ESD protection 8 kV air, 6 kV contact
DIN rail mounting
Metal housing
LED indicator for voltage presence
MTBF above 150,000 hours
Powering a heavily loaded industrial switch calls for headroom: 4.4 A output at 54 V. Passive cooling, metal housing and DIN rail mounting, for operation from -40 to +70 °C.
Powering a heavily loaded industrial switch calls for headroom: 4.4 A output at 54 V. Passive cooling, metal housing and DIN rail mounting, for operation from -40 to +70 °C.
Output 52.38 to 55.62 V DC, 4.4 A
Wide input 90 to 264 V AC, 50/60 Hz
Passive cooling, fanless
Operation from -40 °C to +70 °C
Short-circuit, overcurrent, overvoltage and overheating protection
Surge protection: 4 kV common mode, 2 kV differential mode
ESD protection 8 kV air, 6 kV contact
DIN rail mounting
Metal housing
LED indicator for voltage presence
MTBF above 150,000 hours
Provide reliable, continuous power to your industrial network equipment with the Reyee PSU 240W power supply, designed specifically for RG-NIS2100 switches. Its stable 54 V / 4.4 A output ensures consistent performance, even in demanding environments. With its wide 100–240 V input and adjustable voltage, it adapts easily to any infrastructure. DIN rail mounting simplifies installation in industrial cabinets, while its compact format saves space. Rugged and high-performing, this Reyee industrial power supply secures your network, reduces the risk of downtime and ensures long-lasting operation under field conditions.
In stock Warranty 1 year
959 DHincl. VAT
Order via WhatsApp — Reyee PSU 240W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA240-54)
✓ In stock · Delivered 9 – 13 Nov · Delivery 40 DH · Free pickup
Datasheet (PDF)
Price: 959,00 DH incl. VAT
In stock
Order via WhatsApp — Reyee PSU 240W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA240-54)
Delivery40 DH incl. VAT
✓ In stock · Between Mon 9 Nov and Fri 13 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 5
HPE
Product reference:JW052ANew
HPE Aruba AP-270-MNT-V1 wall and pole mount kit for outdoor access points (JW052A)
Product reference:JW052A
Pole or wall
Long arm
AP-270, AP-360, AP-370, AP-560, AP-570 series
2 hose clamps included
2 M6x20 screws included
Wall anchors not included
Access point not included
Aruba AP-270-MNT-V1 long-arm vertical bracket to install an Aruba outdoor access point on a pole or against a wall. The arm keeps the unit away from the mast to limit RF shadowing. Screws, hose clamps and a cable tie are included; wall anchors are not.
Aruba AP-270-MNT-V1 long-arm vertical bracket to install an Aruba outdoor access point on a pole or against a wall. The arm keeps the unit away from the mast to limit RF shadowing. Screws, hose clamps and a cable tie are included; wall anchors are not.
Pole or wall
Long arm
AP-270, AP-360, AP-370, AP-560, AP-570 series
2 hose clamps included
2 M6x20 screws included
Wall anchors not included
Access point not included
Long-arm mounting bracket to install an Aruba outdoor access point: pole or wall installation, arm that keeps the unit away from the mast and fixings included.
Compatibility: Aruba outdoor access points of the AP-270, AP-360, AP-370, AP-560 and AP-570 series
On a pole: two hose clamps passed through the slots chosen for the diameter and shape of the mast
On a wall: four fixing points, wall anchors not included
In the box: the bracket, two M6x20 screws, two 6-inch hose clamps and a 60 cm cable tie
The long-arm kit of the range, to choose over the short-arm model when the unit goes on a mast.
In stock Warranty 3 years
1 140 DHincl. VAT
Order via WhatsApp — HPE Aruba AP-270-MNT-V1 wall and pole mount kit for outdoor access points (JW052A)
✓ In stock · Delivered 9 – 13 Nov · Delivery 40 DH · Free pickup
Price: 1 140,00 DH incl. VAT
In stock
Order via WhatsApp — HPE Aruba AP-270-MNT-V1 wall and pole mount kit for outdoor access points (JW052A)
Delivery40 DH incl. VAT
✓ In stock · Between Mon 9 Nov and Fri 13 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
3 years
Cisco Systems
Product reference:RCKMNT-1RUNew
Cisco 1U rack-mount kit for Catalyst 2960 and 2960-S (RCKMNT-1RU)
Product reference:RCKMNT-1RU
For Catalyst 2960 and 2960-S
19-inch and 24-inch racks
1U high
Brackets and screws
Cisco RCKMNT-1RU rack-mount kit: the brackets and their screws to install a one-rack-unit Catalyst 2960 or 2960-S switch in a 19-inch or 24-inch rack, or to replace lost brackets.
Cisco RCKMNT-1RU rack-mount kit: the brackets and their screws to install a one-rack-unit Catalyst 2960 or 2960-S switch in a 19-inch or 24-inch rack, or to replace lost brackets.
For Catalyst 2960 and 2960-S
19-inch and 24-inch racks
1U high
Brackets and screws
Cisco rack-mount kit to install a Catalyst 2960 or 2960-S switch in a rack: 1U brackets, 19-inch and 24-inch racks and screws included.
Compatibility: Cisco Catalyst 2960 and 2960-S switches
Rack: 19 or 24 inches, one rack unit high
Contents: mounting brackets and their screws
Installation: a number-2 Phillips screwdriver, front panel or rear panel facing forward
The Cisco spare part when the switch brackets are missing or the rack is 24 inches wide.
In stock Warranty 1 year
2 118 DHincl. VAT
Order via WhatsApp — Cisco 1U rack-mount kit for Catalyst 2960 and 2960-S (RCKMNT-1RU)
✓ In stock · Delivered 9 – 13 Nov · Delivery 40 DH · Free pickup
Price: 2 118,00 DH incl. VAT
In stock
Order via WhatsApp — Cisco 1U rack-mount kit for Catalyst 2960 and 2960-S (RCKMNT-1RU)
Delivery40 DH incl. VAT
✓ In stock · Between Mon 9 Nov and Fri 13 Nov
Free pickup
Casablanca storewithin 24 h
Témara pickup pointwithin 48 h
Warranty
1 year
Image 1 of 4
HP
Product reference:JW046A
HP AP-220-MNT-W1 Series Wall Mount for Aruba 220 Access Points (JW046A)
Product reference:JW046A
Mounting on a flat surface, wall or ceiling
Compatible with AP-224, AP-225 and Instant IAP-224 / IAP-225
Kit containing one flat mounting bracket
Black colour
A flat-surface mounting accessory: it lets the access point sit on a wall or a ceiling where the suspended-ceiling rail clips supplied as standard do not fit.
A flat-surface mounting accessory: it lets the access point sit on a wall or a ceiling where the suspended-ceiling rail clips supplied as standard do not fit.
Mounting on a flat surface, wall or ceiling
Compatible with AP-224, AP-225 and Instant IAP-224 / IAP-225
Kit containing one flat mounting bracket
Black colour
HP AP-220-MNT-W1 Series wall mount for Aruba 220 series access points. Sturdy wall mount, quick to install with no extra tools. Mounting accessory only: it does not change the access point's Wi-Fi range or performance.
On order Warranty 1 year
169 DHincl. VAT
Order via WhatsApp — HP AP-220-MNT-W1 Series Wall Mount for Aruba 220 Access Points (JW046A)
Datasheet (PDF)
Price: 169,00 DH incl. VAT
On order
Order via WhatsApp — HP AP-220-MNT-W1 Series Wall Mount for Aruba 220 Access Points (JW046A)
Warranty
1 year

Is the bracket supplied with the access point?

A ceiling access point usually comes with its standard mounting plate. What is almost always missing is the kit for a specific situation: wall, suspended ceiling with rails, pole, lockable enclosure in public areas. These kits are listed by access point range — a bracket designed for one series will not fit another.

Which power supply for a switch that doesn't have one?

Industrial switches and some PoE models run on direct current and take an external power supply of 120 to 240 W, depending on the PoE budget to be distributed — a single Wi-Fi 6 access point draws 15 to 25 W on its own. Two rules: the voltage must be exact, and the wattage is sized on the actual consumption of the powered devices, not on the number of ports on the switch.

Is a surge protector needed on an outdoor link?

Yes, as soon as an Ethernet cable leaves the building or runs up a mast. A surge protector is fitted at both ends of the outdoor cable run and connected to earth: without earthing, it protects nothing. Outdoor models withstand up to 10 kA. It is the cheapest protection in a rooftop installation, and the only one that spares you replacing the switch after a thunderstorm.

Accessories for Access Points and Switches

Several ways to pay

Delivery to your address

In-store collection — free

HPE Aruba AP-220-MNT-W1W Wall Mount, White (JW047A)

Aruba AP-MNT-D Campus Access Point Mount Kit (R3J18A)

Ubiquiti ETH-SP-G2 Outdoor Ethernet Surge Protection (10kA)

Reyee PSU 120W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA120-54)

Reyee PSU 240W Industrial Power Supply for RG-NIS2100 switch (RG-NIS-PA240-54)

HPE Aruba AP-270-MNT-V1 wall and pole mount kit for outdoor access points (JW052A)

Cisco 1U rack-mount kit for Catalyst 2960 and 2960-S (RCKMNT-1RU)

HP AP-220-MNT-W1 Series Wall Mount for Aruba 220 Access Points (JW046A)

Is the bracket supplied with the access point?

Which power supply for a switch that doesn't have one?

Is a surge protector needed on an outdoor link?

Brands in Access Point & Switch Accessories

Come and see us in store

Chat on WhatsApp

Scan with my phone

Added to basket

Products

Is the bracket supplied with the access point?

Which power supply for a switch that doesn't have one?

Is a surge protector needed on an outdoor link?

Brands in Access Point & Switch Accessories

More to explore