Professional UPS, convertible between rack and tower: line-interactive with voltage regulation, 1000 VA / 800 W and an LCD display. Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery. Power: 1000 VA for 800 W of usable output — a workstation or a small server. Runtime: approx. 24 minutes at half load (400 W), 14 minutes at 70% — generous runtime for its class. Outlets: 8 C13 outlets (for computer and server power cords). Convertible form factor: mounts in a rack or stands as a tower. Quiet operation (40 dB). LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software. Ideal, for example, for a workstation, a small server or network hardware. Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How long does the Smart-UPS X 1000 run on battery?
24 minutes at 50% load, i.e. 400 W, and 14 minutes at 70%, i.e. 560 W. That is very comfortable for a 1000 VA unit, and a full recharge takes only 3 hours.
Can the Smart-UPS X 1000 be installed in a rack or as a tower?
Both: it is a convertible chassis 89 mm high and 432 mm wide, but above all 790 mm deep — that is the point to check, as few cabinets can take it.
Which outlets does the Smart-UPS X 1000 have?
Eight C13 outlets, the format used by computer and server power cords, with a C14 inlet and a 1.83 m cord. Make sure you have IEC cords for your machines.
Why does 1000 VA give only 800 W?
The power factor is 0.8: 800 W actually available. That is well above the 0.5 to 0.6 of desktop UPSs, but sizing is done in watts, never in VA.
Is the Smart-UPS X 1000 quiet?
Yes, it is rated at 40 dBA, which is low for a rack UPS. Allow for 22.9 kg: installation is a two-person job.
Over what voltage range does the AVR operate?
Between 160 and 286 V, at a frequency auto-sensed at 50 or 60 Hz ±3 Hz. The output is synchronised to the mains within the same tolerance.
How do you monitor the Smart-UPS X 1000?
Via a USB port and a SmartSlot for an optional network card. A multifunction LCD console on the front panel shows the UPS status, with no software needed.
Is the APC Smart-UPS X 1000 new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for a period of 3 years. It delivers a pure sine wave, suited to power factor corrected power supplies. The datasheet covers the rest.
A high-end professional UPS with a high power factor (0.9): almost all of the stated power is usable in watts. Convertible rack or tower format, pure sine wave output.
•High power factor (0.9) — almost all the power genuinely usable in watts
•Runtime around 10 minutes at half load (6 minutes at 70%)
•USB port and RS232 serial port for automatic system shutdown
A professional UPS with an excellent power factor (0.9): almost all of the stated power stays usable in watts. Convertible rack or tower format, pure sine wave output.
•1980 W genuinely usable output — high power factor (0.9)
•Runtime around 7 minutes at half load (4 minutes at 70%)
Professional UPS for a network rack, with pure sine wave output and a compact, shallow format. Intelligent battery management that extends their service life.
•1050 W genuinely usable
•Runtime around 13 minutes at half load (8 minutes at 70%)
Automatic voltage regulation (AVR) and a status LCD screen, in a compact tower format. USB and RS-232 ports for the automatic, clean shutdown of a workstation, a server or a small network.
•Automatic voltage regulation (AVR) — corrects fluctuations without drawing on the battery
Desktop UPS with automatic voltage regulation: it corrects drops and surges in the mains without drawing on the battery. Very quiet operation, designed for a workstation and its peripherals.
Desktop UPS with automatic voltage regulation: it corrects drops and surges in the mains without drawing on the battery. Very quiet operation, designed for a demanding workstation.
Automatic voltage regulation (AVR) that absorbs voltage dips and surges without drawing on the battery. Comfortable runtime for a powerful workstation, long enough to save everything.
Protects a demanding workstation or a small server: the voltage regulator corrects drops and surges without draining the battery. Around 9 minutes of runtime at half load.
Desktop UPS with automatic voltage regulation: it corrects drops and surges in the mains without drawing on the battery. Very quiet operation, designed for a computer workstation.
•8 C13 outlets + 1 C19 outlet for power-hungry equipment
In stock
11 499 DHincl. VAT11 499,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•
8 C13 outlets (the format used by computer and server power cords)
In stock
9 599 DHincl. VAT9 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
8 C13 outlets, C14 input, compact tower format
•USB + RS-232 port for automatic, clean shutdown
In stock
8 299 DHincl. VAT8 299,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Runtime around 7.5 minutes at half load (900 W), 4 minutes at 75%
•All outlets are battery-backed
•RS232 and USB ports for automatic system shutdown
In stock
6 190 DHincl. VAT6 190,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Runtime around 9 minutes at half load (5 minutes at 70%)
•8 French outlets, 4 of them battery-backed and 4 surge-protected
•USB port for automatic PC shutdown (Eaton UPS Companion software included)
In stock
4 379 DHincl. VAT4 379,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Runtime around 9 minutes at half load (5 minutes at 70%)
•8 French outlets, 4 of them battery-backed and 4 surge-protected
•USB port for automatic PC shutdown (Eaton UPS Companion software included)
In stock
4 099 DHincl. VAT4 099,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Runtime: around 52 minutes for a PC
•Automatic voltage regulation (AVR) — protects the battery from power fluctuations
Professional UPS for a network rack, with pure sine wave output and a compact, shallow format. Intelligent battery management that extends their service life.
•1050 W genuinely usable
•Runtime around 13 minutes at half load (8 minutes at 70%)
•8 C13 outlets (the format used by computer and server power cords)
Automatic voltage regulation (AVR) that absorbs power fluctuations without drawing on the battery. Comfortable runtime for a full workstation, long enough to save everything before shutdown.
Automatic voltage regulation (AVR) that absorbs voltage dips and surges without drawing on the battery. Comfortable runtime for a powerful workstation, long enough to save everything.
Automatic voltage regulator (AVR) that protects the battery from current fluctuations. Comfortable runtime for a PC and its accessories, long enough to save and shut down cleanly.
A high-end professional UPS with a high power factor (0.9): almost all of the stated power is usable in watts. Convertible rack or tower format, pure sine wave output.
A professional UPS with an excellent power factor (0.9): almost all of the stated power stays usable in watts. Convertible rack or tower format, pure sine wave output.
•1980 W genuinely usable output — high power factor (0.9)
•Runtime around 7 minutes at half load (4 minutes at 70%)
Automatic voltage regulation (AVR) and a status LCD screen, in a compact tower format. USB and RS-232 ports for the automatic, clean shutdown of a workstation, a server or a small network.
•Automatic voltage regulation (AVR) — corrects fluctuations without drawing on the battery
The most powerful Agilon VX: 900 W of real power on 6 C13 outlets for a workstation and its monitors or a small network corner. AVR regulator, LCD touch screen and automatic PC shutdown over USB.
Automatic voltage regulation (AVR) that steadies the power without drawing on the battery. Enough runtime to save your work and shut the PC down cleanly during an outage.
