Skip to main content

Welcome to the new iris.ma

We rebuilt everything for you

Same team, same standards

Pay nowView my order
Visit the nJoy store

nJoy Argus 1200 Rack-mountable Line-Interactive UPS - 720 W / 1200 VA - 4 IEC C13 outlets (UPLI-LI120AG-CG)

Pure sine wave output for a particularly clean power supply, with a comfortable runtime of around 11.5 minutes at half load.

  • Runtime around 11.5 minutes at half load (360 W), 6.5 minutes at 75%
  • All the outlets are backed up by the battery
  • RS232 and USB ports for automatic system shutdown
  • Surge protection for the telephone/network line (RJ11/RJ45)
  • Automatic voltage regulator (AVR, 1 boost / 1 buck)
  • Pure sine wave output
  • 2U rack format, convertible to a tower
  • LCD screen
  • Emergency power off (EPO)
  • Slot for an optional SNMP network card
  • Audible noise below 50 dB
Ref.: UPLI-LI120AG-CG
3 579,00 DHincl. VAT

Configuration · nJoy Argus

Out of stock

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Can’t wait?

Ask for an alternative on WhatsApp

Quick reply

Manufacturer's datasheetView the PDF · 327 Ko — downloadable

Product overview

Professional rack-mountable UPS for IT cabinets: line-interactive with voltage regulation, 1200 VA / 720 W, rack format.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and corrects voltage drops and spikes without drawing on the battery.
Power: 1200 VA for 720 W of usable output.
Outlets: 4 C13 outlets (for computer and server power cords).
Fits straight into an IT rack cabinet.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a small server, a switch or a NAS in a rack.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.

See all the specifications ↓
Request a quoteShare:

Technical specifications

Technical specifications
Output voltage230 V
Waveform typePure sine wave
Output connections(4) IEC C13
Input voltage230V
Input frequency50/60 Hz (auto detection)
Voltage range165-290 V
Automatic voltage regulation (AVR)AVR step-up and step-down (boost and buck), input range 165 - 290 V
Battery type2 internal GP09122L batteries
Battery managementCharging when the unit is off, protection against deep discharge and overcharge
Typical recharge time4 hours to 90% of capacity
Interface port1 RS-232 serial port, 1 USB HID port, 1 intelligent port for SNMP card (not supplied)
User interfaceLCD screen (load level, battery level, mains mode, battery mode, fault)
Audible alarmAudible alarm: load, battery level, mains mode, battery mode, fault
Power management softwarePowerMonitor
Weight (kg)14.96 kg
Dimensions (W x D x H) (mm)438 x 430 x 88 mm
TechnologyLine Interactive
Power (VA)1,200 VA
Technical specifications (continued)
Voltage stabiliserYes
Replacement batteryGP09122L (nJoy part number BTVACGUEBTC2LBT01B)
Communication card slot1 intelligent port for SNMP card (optional, not supplied)
Rack height2U
Transfer/switching time4 ms typical
Cold startYes
Emergency power-off switchYes
Audible noise<50dB
Power factor (ratio)≥ 0.6
Output frequency50 Hz or 60Hz ± 1 Hz
Phase (output/input)Single-phase
Output typeC13 outlets
Power (W)720 W
Runtime24 min 7 s at 25% load; 11 min 30 s at 50%; 6 min 35 s at 75%; 3 min 5 s at full load
Form factorConvertible rack/tower
Battery-backed outlets3 to 4 outlets
Control & communicationUSB, RS232 serial port
Warranty3 years

Customer reviews

No reviews yet

Be the first to review this product and help other customers.

Write a review
Your rating
5/5

Shown publicly with your review.

Never published — a confirmation email will be sent to you.

Tell us about the product — in a few lines:

  • what you liked in everyday use;
  • the quality and performance you found;
  • who you would recommend it to, and why.

A question about an order, a delivery or a payment? Write to us and we will reply to you directly.

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Frequently asked questions about this product

How long does the Argus 1200 run on battery?
11 minutes 30 seconds at half load, i.e. 360 W, 6 minutes 35 seconds at 75% and 3 minutes at full load, at 720 W. With a light load of 180 W, it lasts over 24 minutes: the headroom you leave determines the runtime.
Is a line-interactive UPS with a pure sine wave common?
No, and that is the appeal of this model: its battery output is a pure sine wave, whereas most UPS units in this family settle for a stepped approximation to a sine wave. Switchover takes 4 milliseconds.
Are all four outlets on the Argus 1200 battery-backed?
Yes, all four C13 outlets are powered by the battery and protected against surges. Two RJ11/RJ45 ports also protect the phone or network line that passes through the unit.
Why do 1200 VA give only 720 W?
Because the power factor is 0.6: just over half of the apparent power is usable. So it is 720 W that you should compare with the combined consumption of your server and your network equipment.
Over what voltage range does the AVR on the Argus 1200 correct?
Between 165 and 290 V, with one boost stage and one buck stage. Within this range, the voltage is brought back to its normal value without switching to battery, which stays full for real power cuts.
Does the Argus 1200 mount in a rack or stand as a tower?
Both: it is a 2U convertible chassis, 88 mm high, 438 wide and 430 deep. It slides into a 19-inch cabinet or stands on the floor, depending on the space you have.
How do you monitor the Argus 1200?
Through a USB HID port and an RS-232 serial port, with the PowerGuide or PowerMaster software for monitoring and automatic shutdown. An intelligent slot accepts an SNMP card, to be ordered separately.
Does the Argus 1200 work when powered by a generator?
Yes, it is stated to be generator-compatible. It also has an emergency power-off (EPO), cold start on battery and charging that works even when the unit is switched off.
How long does the Argus 1200 take to recharge?
4 hours to get back to 90% of capacity, on two internal GP09122L batteries. It does not accept an external battery pack: its runtime is that of its original batteries.
Is the nJoy Argus 1200 UPS new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for a period of 3 years. It stays below 50 dB, shows the load and battery level on an LCD screen, and restarts by itself when power returns. The datasheet covers the rest.

Trending

Chat on WhatsApp

Scan with my phone

The simplest way: open your phone camera and point it at this code. The chat opens with your message ready.

Open WhatsApp Web

Works if your phone is already linked to this computer.

Prefer to call? (+212) 05 30 31 64 21