APC Smart-UPS 1500 VA Line-Interactive UPS - 2U Rack (SMT1500RMI2U)
For a server or a network rack: 1000 W usable, runtime of around 25 minutes at half load. LCD control display and SmartSlot port to add a network card.
Usable power 1000 W
Runtime around 25 min at half load (500 W), 14 min at 70%
Professional UPS to protect servers and networking equipment: line-interactive with voltage regulation, 1500 VA / 1000 W, 2U rack form factor. Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery — clean, stable power at all times. Power: 1500 VA for 1000 W of usable output. Runtime: approx. 25 minutes at half load (500 W), 14 minutes at 70% — plenty of time to shut your machines down properly. Outlets: 4 C13 outlets (for computer and server power cords). Mounts directly in an IT cabinet, with discreet operation. LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software. Ideal, for example, for a small server, a switch or networking equipment in a rack. Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How long does the SMT1500RMI2U run on battery?
25 minutes at 50% load, i.e. 500 W, and 14 minutes at 70%, i.e. 700 W. A full recharge then takes only 3 hours.
How long does it take to switch to battery?
2 milliseconds typical — considerably faster than the 6 to 10 ms usual in this category. The output is also a pure sine wave, which server power supplies require.
Which outlets does the SMT1500RMI2U have?
Four C13 outlets, with a C14 inlet. The box contains the rack mounting rails, a USB cable, an RS-232 cable, the installation guide and the CDs.
Why does 1500 VA give only 1000 W?
The power factor is 0.66: 1500 × 0.66 = 1000 W actually available. Compare this wattage figure with the consumption of your server or network rack, never the VA in the product name.
How much rack space does the SMT1500RMI2U take up?
2U in height (89 mm), 432 mm wide and 457 mm deep, weighing 28.6 kg. The mounting rails are included: nothing extra to order to install it.
Over what voltage range does the AVR operate?
Between 160 and 286 V, at a frequency auto-sensed at 50 or 60 Hz ±3 Hz. As long as the mains stays within this window, the battery is not used.
How do you monitor the SMT1500RMI2U?
Via a USB port, an RJ-45 serial port and a SmartSlot for an optional network card. A multifunction LCD console on the front panel shows the status, with no software needed.
Is the APC Smart-UPS SMT1500RMI2U new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for a period of 3 years. It stays below 46 dBA: suitable for installation in a rack or an equipment room. The datasheet covers the rest.
A high-end professional UPS with a high power factor (0.9): almost all of the stated power is usable in watts. Convertible rack or tower format, pure sine wave output.
•High power factor (0.9) — almost all the power genuinely usable in watts
•Runtime around 10 minutes at half load (6 minutes at 70%)
•USB port and RS232 serial port for automatic system shutdown
A professional UPS with an excellent power factor (0.9): almost all of the stated power stays usable in watts. Convertible rack or tower format, pure sine wave output.
•1980 W genuinely usable output — high power factor (0.9)
•Runtime around 7 minutes at half load (4 minutes at 70%)
Professional UPS for a network rack, with pure sine wave output and a compact, shallow format. Intelligent battery management that extends their service life.
•1050 W genuinely usable
•Runtime around 13 minutes at half load (8 minutes at 70%)
Automatic voltage regulation (AVR) and a status LCD screen, in a compact tower format. USB and RS-232 ports for the automatic, clean shutdown of a workstation, a server or a small network.
•Automatic voltage regulation (AVR) — corrects fluctuations without drawing on the battery
Tower format for several servers or network equipment: 2100 W usable, 8 C13 outlets + 1 reinforced C19 outlet all battery-backed. Quiet operation (≈ 45 dB).
Desktop UPS with automatic voltage regulation: it corrects drops and surges in the mains without drawing on the battery. Very quiet operation, designed for a workstation and its peripherals.
Desktop UPS with automatic voltage regulation: it corrects drops and surges in the mains without drawing on the battery. Very quiet operation, designed for a demanding workstation.
Automatic voltage regulation (AVR) that absorbs voltage dips and surges without drawing on the battery. Comfortable runtime for a powerful workstation, long enough to save everything.
Protects a demanding workstation or a small server: the voltage regulator corrects drops and surges without draining the battery. Around 9 minutes of runtime at half load.
•8 C13 outlets + 1 C19 outlet for power-hungry equipment
In stock
11 499 DHincl. VAT11 499,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•
8 C13 outlets (the format used by computer and server power cords)
In stock
9 599 DHincl. VAT9 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
8 C13 outlets, C14 input, compact tower format
•USB + RS-232 port for automatic, clean shutdown
In stock
8 299 DHincl. VAT8 299,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Runtime around 7.5 minutes at half load (900 W), 4 minutes at 75%
•All outlets are battery-backed
•RS232 and USB ports for automatic system shutdown
In stock
6 190 DHincl. VAT6 190,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
Professional UPS for a network rack, with pure sine wave output and a compact, shallow format. Intelligent battery management that extends their service life.
•1050 W genuinely usable
•Runtime around 13 minutes at half load (8 minutes at 70%)
•8 C13 outlets (the format used by computer and server power cords)
Automatic voltage regulation (AVR) and a status LCD screen, in a compact tower format. USB and RS-232 ports for the automatic, clean shutdown of a workstation, a server or a small network.
•Automatic voltage regulation (AVR) — corrects fluctuations without drawing on the battery
Automatic voltage regulation (AVR) that absorbs power fluctuations without drawing on the battery. Comfortable runtime for a full workstation, long enough to save everything before shutdown.
Desktop UPS with automatic voltage regulation: it corrects drops and surges in the mains without drawing on the battery. Very quiet operation, designed for a demanding workstation.
Automatic voltage regulation (AVR) that protects the battery from current fluctuations. French outlets for plugging your equipment in directly, without an adapter.
Automatic voltage regulator (AVR) that protects the battery from current fluctuations. Comfortable runtime for a PC and its accessories, long enough to save and shut down cleanly.
Desktop UPS with automatic voltage regulation: it corrects drops and surges in the mains without drawing on the battery. Very quiet operation, designed for a workstation and its peripherals.
Built-in voltage regulator that corrects drops and surges without drawing on the battery. Battery life of around 10 minutes at half load, quiet operation (40 dB).
A high-end professional UPS with a high power factor (0.9): almost all of the stated power is usable in watts. Convertible rack or tower format, pure sine wave output.
A professional UPS with an excellent power factor (0.9): almost all of the stated power stays usable in watts. Convertible rack or tower format, pure sine wave output.
•1980 W genuinely usable output — high power factor (0.9)
•Runtime around 7 minutes at half load (4 minutes at 70%)
