Skip to main content
Black Friday — our best deals of the year
Pay nowView my order
iris.ma — The Tech ExpertBlack Friday
Menu
Visit the APC store

APC Smart-UPS X 1500VA Rack/Tower LCD 230V Line-Interactive UPS with network card

Monitored remotely through its built-in network card: 1200 W usable, power factor 0.8. Runtime of around 17 minutes at half load, quiet operation (40 dB).

  • Usable power 1200 W
  • Power factor 0.8 — a wide margin of usable power in watts
  • Runtime around 17 min at half load (600 W), 10 min at 70%
  • Runtime extendable with additional battery modules
  • 8 C13 outlets, all battery-backed
  • Built-in network card for remote control and monitoring
  • Quiet operation (40 dB)
Ref.: SMX1500RMI2UNC
APC Smart-UPS X 1500VA Rack/Tower LCD 230V Line-Interactive UPS with network card — image 1
APC Smart-UPS X 1500VA Rack/Tower LCD 230V Line-Interactive UPS with network card — image 2

Non-contractual photos

The visuals on this page are supplied by the manufacturer. They are frequently produced for a whole range — not for the exact model you are viewing: what you see in the photo is never a promise of what is included.

No exchange, return or cancellation will be accepted on the grounds that something seen in a photo (accessory, port, colour, keyboard layout, packaging…) is not found on the delivered product. Only the specifications written on the page are binding for the order.

What the image does not guarantee:

  • Outlets : the number and type of outlets (Schuko, IEC) vary between versions of a single photographed series.
  • Options : LCD display, USB or RJ45 port, SNMP network card and rack kit are supplied only if the specifications say so.
  • Batteries : the additional battery modules photographed next to the UPS are sold separately.
  • Runtime : it depends on the load actually plugged in, never on what the image shows.
  • Colour : one image often serves several colours, and the shade you see depends on studio lighting as much as on your screen settings; the colour sold is the one in the title and the specifications.
  • Props and accessories : the items shown around the product (cables, stands, decorative objects, content displayed on screen) are not included unless explicitly stated.
  • Packaging : boxes, labels and bundles change with the manufacturer's revisions: the packaging delivered may differ from the one in the photo.

What is binding: the product title, this page's technical specifications, the description and, when provided, the manufacturer's PDF datasheet available in the downloads.

The slightest doubt about a specification? Contact us before ordering and we will check for you.

+212 6 64 10 46 24service.client@iris.ma

See our terms and conditions of sale.

1/2
26 799,00 DHincl. VAT

Out of stock

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Can’t wait?

Ask for an alternative on WhatsApp

Quick reply

Manufacturer's datasheetView the PDF · 97 Ko — downloadable

Product overview

Professional rack/tower convertible UPS with remote monitoring: line-interactive with voltage regulation, 1500 VA / 1200 W and LCD display.
Technology & protection: it switches to battery the moment the power fails, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 1500 VA for 1200 W of usable power.
Outlets: 8 C13 outlets, all with battery backup.
Management: built-in network card for remote control and monitoring. Runtime can be extended with an additional battery pack.
LCD display: shows load, battery level and remaining runtime at a glance — monitor the UPS without any software.
Ideal, for example, for a server, storage or network equipment in a rack or tower setup.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.

See all the specifications ↓
Request a quoteShare:

Technical specifications

Technical specifications
Output voltage230V
Waveform typeSine wave
Output connections8 battery-backed IEC 320 C13 outlets + 2 battery-backed IEC jumpers
Input voltage230V
Input frequency50/60 Hz +/- 3 Hz (auto-sensing)
Input connectionsIEC-320 C14
Cord length1.83 metres
Voltage range160 - 286 V
Automatic voltage regulation (AVR)AVR (automatic voltage regulation), input range 160 - 286 V (adjustable 151 - 302 V)
Input circuit breaker rating10 A
Battery typeSealed maintenance-free lead-acid battery with suspended electrolyte: leakproof
Typical recharge time3 hours
Interface port1 USB port, 1 SmartSlot
User interfaceMultifunction LCD status and control console
Audible alarmAlarm when switching to battery mode; distinct low-battery alarm; continuous alarm on overload
Weight (kg)24.82 kg
Dimensions (W x D x H) (mm)432 x 490 x 89 mm
Estimated battery service life (years)3 to 5 years
Technical specifications (continued)
TechnologyLine Interactive
Power (VA)1,500
Voltage stabiliserYes
Box contentsCD with software · Rack mounting support rails
Replacement batteryAPCRBC115
Communication card slotNo free SmartSlot: occupied by the network management card
Rack height2U
Surge protection and filtering645 J
Output voltage distortionLess than 5%
Audible noise40 dB(A)
Output frequency50/60 Hz +/- 3 Hz synchronised to mains
Output typeC13 outlets
Power (W)1,200 W
Runtime50% load (600 Watts): 17 minutes / 70% load (840 Watts): 10 minutes
Form factorConvertible rack/tower
Battery-backed outlets5 to 8 outlets
Control & communicationNetwork (SNMP / monitoring)
Warranty3 years

Downloads

Customer reviews

No reviews yet

Be the first to review this product and help other customers.

Write a review
Your rating
5/5

Shown publicly with your review.

Never published — a confirmation email will be sent to you.

Tell us about the product — in a few lines:

  • what you liked in everyday use;
  • the quality and performance you found;
  • who you would recommend it to, and why.

A question about an order, a delivery or a payment? Write to us and we will reply to you directly.

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Frequently asked questions about this product

Is the network card built into this Smart-UPS X 1500?
Yes, a network card is built in: control and monitoring are done remotely over the company network, with no accessory to add. This is what sets this reference apart from the same model without a card.
How long does this Smart-UPS X 1500 run on battery?
17 minutes at 50% load, i.e. 600 W, and 10 minutes at 70%, i.e. 840 W. Runtime can be extended with additional battery packs, and a full recharge takes 3 hours.
Why does this 1500 VA unit deliver 1200 W?
Thanks to a power factor of 0.8: 1500 × 0.8 = 1200 W actually available. That is a generous margin of usable power compared with desktop UPSs, which often top out at 0.55.
Are all the outlets battery-backed?
Yes: eight C13 outlets and two IEC jumpers, all powered by the battery. Input is via a C14 inlet, protected by a 10 A circuit breaker.
Can this model be installed in a rack or as a tower?
Both: it is a convertible 2U chassis, weighing 24.8 kg. The power cord is 1.83 m long, so you need a socket close to where the unit will sit.
Is the battery replaceable on this Smart-UPS X 1500?
Yes, under reference APCRBC115, as a single unit. Three distinct audible alarms also signal the switch to battery, the low battery threshold and overload.
Over what voltage range does the AVR operate?
Between 160 and 286 V, at a frequency auto-sensed at 50 or 60 Hz ±3 Hz, with the output synchronised to the mains within the same tolerance.
Is the APC Smart-UPS X 1500 with network card new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for 3 years. It is rated at 40 dB, so it can stay in a shared room. The datasheet covers the rest.

Trending

View the APC archive

Estimate the delivery time for your city:

Chat on WhatsApp

Scan with my phone

The simplest way: open your phone camera and point it at this code. The chat opens with your message ready.

Open WhatsApp Web

Works if your phone is already linked to this computer.