Skip to main content

Pay now View my order

Order by phone: (+212) 05 30 31 64 21WhatsApp

APC Store

· 157 items

Browse the APC range available at iris.ma, the tech expert in Morocco: prices in dirhams, live stock and delivery anywhere in Morocco.

APC(157)

In stock only(31)

157 ref.references

Sort by

APC
Product reference:SRT2200RMXLI
APC Smart-UPS SRT SRT2200RMXLI Online UPS - 1980 W / 2200 VA - 8 C13 outlets + 2 C19 outlets
Product reference:SRT2200RMXLI
Runtime of 11 minutes at 50% load (990 W) and 7 minutes at 70% (1386 W)
C13 outlets: the format used by computer and server power cords
C19 outlets: heavy-duty 16 A outlets for power-hungry equipment
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
Free slot for a network management card
Built-in bypass: power still flows if the UPS fails
Runtime extendable with additional SRT72RMBP battery modules
Replaceable battery, reference APCRBC141
Full recharge in 3 hours
Emergency power off switch
2U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
Weight 25 kg
Allow eleven minutes at half load (990 W) and seven minutes at 70% to shut the servers down cleanly. A rack chassis of just 2U, LCD display, built-in bypass and additional battery modules to extend the runtime.
Allow eleven minutes at half load (990 W) and seven minutes at 70% to shut the servers down cleanly. A rack chassis of just 2U, LCD display, built-in bypass and additional battery modules to extend the runtime.
Runtime of 11 minutes at 50% load (990 W) and 7 minutes at 70% (1386 W)
C13 outlets: the format used by computer and server power cords
C19 outlets: heavy-duty 16 A outlets for power-hungry equipment
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
Free slot for a network management card
Built-in bypass: power still flows if the UPS fails
Runtime extendable with additional SRT72RMBP battery modules
Replaceable battery, reference APCRBC141
Full recharge in 3 hours
Emergency power off switch
2U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
Weight 25 kg
An online UPS for servers and network racks: online double conversion, 2200 VA / 1980 W, rack format.
Technology & protection: power is fully and continuously regenerated — your servers are never connected directly to the mains, with zero transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise.
Power: 2200 VA for 1980 W of real power (0.9 power factor) — almost all of the rated power is available in watts, for one or more servers.
Runtime: extendable with an additional battery module for longer backup.
Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets for power-hungry equipment.
2U rack chassis; like every online model, it has active cooling — to be installed in a rack or technical room.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for business servers, storage or network equipment.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
28 799 DHincl. VAT
Availability alert
APC Smart-UPS SRT SRT2200RMXLI Online UPS - 1980 W / 2200 VA - 8 C13 outlets + 2 C19 outlets
Datasheet (PDF)
Price: 28 799,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT SRT2200RMXLI Online UPS - 1980 W / 2200 VA - 8 C13 outlets + 2 C19 outlets
Warranty
3 years
APC
Product reference:SRT3000RMXLI
APC Smart-UPS SRT 3 000VA Double-Conversion Online UPS Rack 230V (SRT3000RMXLI)
Product reference:SRT3000RMXLI
2700 W genuinely available
Runtime of 11 minutes at 50% load (1350 W) and 7 minutes at 70% (1890 W)
8 C13 outlets, the format used by computer and server power cords
2 C19 outlets, heavy-duty 16 A for power-hungry equipment
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
Free slot for a network management card
Automatic and manual internal bypass
Runtime extendable with additional SRT96RMBP battery modules
Replaceable battery, reference APCRBC152
Full recharge in 3 hours
Emergency power off switch
2U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
Weight 31.3 kg
2700 W genuinely available and eleven minutes of runtime at half load (1350 W): time enough to shut a rack down cleanly. 2U chassis, LCD display, internal bypass and battery modules to go further.
2700 W genuinely available and eleven minutes of runtime at half load (1350 W): time enough to shut a rack down cleanly. 2U chassis, LCD display, internal bypass and battery modules to go further.
2700 W genuinely available
Runtime of 11 minutes at 50% load (1350 W) and 7 minutes at 70% (1890 W)
8 C13 outlets, the format used by computer and server power cords
2 C19 outlets, heavy-duty 16 A for power-hungry equipment
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
Free slot for a network management card
Automatic and manual internal bypass
Runtime extendable with additional SRT96RMBP battery modules
Replaceable battery, reference APCRBC152
Full recharge in 3 hours
Emergency power off switch
2U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
Weight 31.3 kg
An online UPS for servers and network racks: online double conversion, 3000 VA / 2700 W, rack format.
Technology & protection: power is constantly rebuilt — the equipment receives flawless power without ever touching the mains, with zero transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise.
Power: 3000 VA for 2700 W of real power.
Runtime: its battery takes over during a power cut, giving you time to shut the servers down cleanly or to hand over to a generator; runtime can be extended with additional battery modules.
Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets.
Active cooling, to be installed in a rack or technical room.
Designed, for example, for servers, network equipment or critical business hardware.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
44 699 DHincl. VAT
Availability alert
APC Smart-UPS SRT 3 000VA Double-Conversion Online UPS Rack 230V (SRT3000RMXLI)
Datasheet (PDF)
Price: 44 699,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT 3 000VA Double-Conversion Online UPS Rack 230V (SRT3000RMXLI)
Warranty
3 years
APC
Product reference:SMT1500RMI2UNC
APC Smart-UPS 1 500 VA Rack/Tower Line-Interactive UPS (SMT1500RMI2UNC)
Product reference:SMT1500RMI2UNC
1000 W usable power (1500 VA)
Runtime around 25 min at half load (500 W), 14 min at 70%
4 C13 outlets (computer and server power cords)
Built-in network card (remote control and monitoring)
USB and RS-232 port for automatic system shutdown
Pure sine wave output
Multifunction LCD display
Audible noise 46 dBA
Professional UPS for servers, with a built-in network card for remote control. LCD display, USB/RS-232 port for automatic shutdown. Runtime around 25 minutes at half load.
Professional UPS for servers, with a built-in network card for remote control. LCD display, USB/RS-232 port for automatic shutdown. Runtime around 25 minutes at half load.
1000 W usable power (1500 VA)
Runtime around 25 min at half load (500 W), 14 min at 70%
4 C13 outlets (computer and server power cords)
Built-in network card (remote control and monitoring)
USB and RS-232 port for automatic system shutdown
Pure sine wave output
Multifunction LCD display
Audible noise 46 dBA
Professional UPS for servers, with remote monitoring: line-interactive with voltage regulation, 1500 VA / 1000 W, rack/tower form factor.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without tapping into the battery.
Power: 1500 VA for 1000 W of usable output.
Runtime: approx. 25 minutes at half load (500 W), 14 minutes at 70% — more than enough time to shut your machines down properly.
Outlets: 4 C13 outlets (for computer and server power cords).
Management: built-in network card to control and monitor the UPS remotely — essential in a server room.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a rack-mounted server or networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 2 years
19 399 DHincl. VAT
Availability alert
APC Smart-UPS 1 500 VA Rack/Tower Line-Interactive UPS (SMT1500RMI2UNC)
Datasheet (PDF)
Price: 19 399,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS 1 500 VA Rack/Tower Line-Interactive UPS (SMT1500RMI2UNC)
Warranty
2 years
Image 1 of 4
APC
Product reference:SRT3000RMXLI-NC
APC Smart-UPS SRT 3000VA Double-Conversion Online UPS Rack 230V with network card (SRT3000RMXLI-NC)
Product reference:SRT3000RMXLI-NC
Network management card installed, with environmental condition monitoring
2700 W genuinely available
Runtime of 11 minutes at 50% load (1350 W) and 7 minutes at 70% (1890 W)
8 C13 outlets, the format used by computer and server power cords
2 C19 outlets, heavy-duty 16 A for power-hungry equipment
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
Automatic and manual internal bypass
Runtime extendable with additional SRT96RMBP battery modules
Replaceable battery, reference APCRBC152
Full recharge in 3 hours
Emergency power off switch
2U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
Weight 31.3 kg
Delivered with its network management card already installed, with environmental monitoring on top. 2700 W genuinely available and eleven minutes of runtime at half load (1350 W) to shut the servers down cleanly.
Delivered with its network management card already installed, with environmental monitoring on top. 2700 W genuinely available and eleven minutes of runtime at half load (1350 W) to shut the servers down cleanly.
Network management card installed, with environmental condition monitoring
2700 W genuinely available
Runtime of 11 minutes at 50% load (1350 W) and 7 minutes at 70% (1890 W)
8 C13 outlets, the format used by computer and server power cords
2 C19 outlets, heavy-duty 16 A for power-hungry equipment
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
Automatic and manual internal bypass
Runtime extendable with additional SRT96RMBP battery modules
Replaceable battery, reference APCRBC152
Full recharge in 3 hours
Emergency power off switch
2U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
Weight 31.3 kg
An online UPS for servers, with remote monitoring: online double conversion, 3000 VA / 2700 W, rack format.
Technology & protection: power is fully and continuously regenerated — the servers are never exposed to the mains, with zero transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise.
Power: 3000 VA for 2700 W of real power.
Runtime: its battery takes over during a power cut, giving you time to shut the servers down cleanly; runtime can be extended with additional battery modules.
Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets.
Management: built-in network card to control and monitor the UPS remotely over the network — a real asset in a server room.
Active cooling, to be installed in a rack or technical room.
Designed, for example, for servers or critical network infrastructure.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
48 899 DHincl. VAT
Availability alert
APC Smart-UPS SRT 3000VA Double-Conversion Online UPS Rack 230V with network card (SRT3000RMXLI-NC)
Datasheet (PDF)
Price: 48 899,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT 3000VA Double-Conversion Online UPS Rack 230V with network card (SRT3000RMXLI-NC)
Warranty
3 years
APC
Product reference:SMT1500RMI1U
APC Smart-UPS 1 500 VA Rack Line-Interactive UPS (SMT1500RMI1U)
Product reference:SMT1500RMI1U
1000 W usable power (1500 VA)
C13 outlets (computer and server power cords)
Ultra-compact 1U rack format (a single rack unit)
Ultra-compact 1U professional UPS for a computer rack — it saves space while keeping the reliability of the Smart-UPS range. For a server or network equipment.
Ultra-compact 1U professional UPS for a computer rack — it saves space while keeping the reliability of the Smart-UPS range. For a server or network equipment.
1000 W usable power (1500 VA)
C13 outlets (computer and server power cords)
Ultra-compact 1U rack format (a single rack unit)
Ultra-compact professional UPS for a server rack: line-interactive with voltage regulation, 1500 VA / 1000 W, in a 1U rack form factor (a single rack unit high).
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 1500 VA for 1000 W of usable output — a server or networking equipment.
Outlets: C13 output outlets (for computer and server power cords).
The 1U form factor saves rack space while delivering the reliability of the Smart-UPS range.
Ideal, for example, for a rack-mounted server, switch or firewall.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 1 year
17 699 DHincl. VAT
Availability alert
APC Smart-UPS 1 500 VA Rack Line-Interactive UPS (SMT1500RMI1U)
Price: 17 699,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS 1 500 VA Rack Line-Interactive UPS (SMT1500RMI1U)
Warranty
1 year
APC
Product reference:SRT6KRMXLI
APC Smart-UPS SRT 6000VA Double-Conversion Online UPS Rack 230V (SRT6KRMXLI)
Product reference:SRT6KRMXLI
6000 W genuinely available, power factor of 1
Runtime of 8 minutes at 50% load (3000 W) and 5 minutes at 70% (4200 W)
Web/SNMP management card included, for remote monitoring
3-wire terminal block input connection, to be installed by an electrician
6 C13 outlets, the format used by computer and server power cords
4 C19 outlets, heavy-duty 16 A for power-hungry equipment
Output also available as terminal block wiring
Pure sine wave output
Automatic and manual internal bypass
Runtime extendable with additional SRT192RMBP battery packs
LCD display: load, battery level and remaining runtime at a glance
Temperature probe included
Full recharge in 1 h 30
4U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
6000 W genuinely available, as many as the stated VA, and eight minutes of runtime at half load (3000 W). Web/SNMP management card included; both input and output can be wired to a terminal block.
6000 W genuinely available, as many as the stated VA, and eight minutes of runtime at half load (3000 W). Web/SNMP management card included; both input and output can be wired to a terminal block.
6000 W genuinely available, power factor of 1
Runtime of 8 minutes at 50% load (3000 W) and 5 minutes at 70% (4200 W)
Web/SNMP management card included, for remote monitoring
3-wire terminal block input connection, to be installed by an electrician
6 C13 outlets, the format used by computer and server power cords
4 C19 outlets, heavy-duty 16 A for power-hungry equipment
Output also available as terminal block wiring
Pure sine wave output
Automatic and manual internal bypass
Runtime extendable with additional SRT192RMBP battery packs
LCD display: load, battery level and remaining runtime at a glance
Temperature probe included
Full recharge in 1 h 30
4U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
A high-power online UPS for critical infrastructure: online double conversion, 6000 VA / 6000 W, rack format.
Technology & protection: power is fully and continuously regenerated — the equipment is never exposed to the mains, with zero transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise.
Power: 6000 VA for 6000 W of real power (power factor of 1) — all of the rated power is available in watts, enough for a full server rack.
Runtime: its battery takes over during a power cut, giving you time to shut the servers down cleanly; runtime can be extended with additional battery modules.
Outlets: 6 C13 outlets + 4 heavy-duty C19 outlets; terminal block input.
Active cooling, to be installed in a rack or technical room.
Designed, for example, for server racks or data centres.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
76 799 DHincl. VAT
Availability alert
APC Smart-UPS SRT 6000VA Double-Conversion Online UPS Rack 230V (SRT6KRMXLI)
Datasheet (PDF)
Price: 76 799,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT 6000VA Double-Conversion Online UPS Rack 230V (SRT6KRMXLI)
Warranty
3 years
APC
Product reference:SRT192RMBP2
APC Smart-UPS Online SRT SRT192RMBP2 Rack Battery - for SRT 8/10 kVA (SRT192RMBP2)
Product reference:SRT192RMBP2
Maximise the reliability of your mission-critical applications with the APC Smart-UPS Online SRT SRT192RMBP2 Battery. Get extended runtime during power cuts with this external battery pack, compatible with 8 and 10 kVA Smart-UPS SRT units. 3U rack format for integration into a rack cabinet, with hot-swappable batteries that can be replaced without cutting power to the protected equipment. Built-in monitoring of runtime and battery health at cell, module and cabinet level. Up to 10 battery packs can be chained to extend runtime. Its wide operating temperature range of 0 to 40 °C adapts to a variety of environments.
Maximise the reliability of your mission-critical applications with the APC Smart-UPS Online SRT SRT192RMBP2 Battery. Get extended runtime during power cuts with this external battery pack, compatible with 8 and 10 kVA Smart-UPS SRT units. 3U rack format for integration into a rack cabinet, with hot-swappable batteries that can be replaced without cutting power to the protected equipment. Built-in monitoring of runtime and battery health at cell, module and cabinet level. Up to 10 battery packs can be chained to extend runtime. Its wide operating temperature range of 0 to 40 °C adapts to a variety of environments.
Out of stock Warranty 1 year
21 599 DHincl. VAT
Availability alert
APC Smart-UPS Online SRT SRT192RMBP2 Rack Battery - for SRT 8/10 kVA (SRT192RMBP2)
Price: 21 599,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS Online SRT SRT192RMBP2 Rack Battery - for SRT 8/10 kVA (SRT192RMBP2)
Warranty
1 year
Image 1 of 4
APC
Product reference:SRT3000XLI
APC Smart-UPS SRT SRT3000XLI Online UPS - 2700 W / 3000 VA - 8 C13 outlets + 2 C19 outlets
Product reference:SRT3000XLI
Runtime of 11 minutes at 50% load (1350 W) and 7 minutes at 70% (1890 W)
All output outlets are battery-backed
C13 outlets: the format used by computer and server power cords
C19 outlets: heavy-duty 16 A outlets for power-hungry equipment
Power factor of 0.9
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
USB port and Smart-Slot for a network management card
Automatic and manual internal bypass
Runtime extendable with additional SRT96BP battery modules
Replaceable battery, reference APCRBC152
Full recharge in 3 hours
Noise level below 55 dBA: active ventilation, better in a technical room
Installed either as a tower or in a rack, with a mounting kit
Weight 31.3 kg
Eleven minutes of runtime at half load (1350 W) and seven minutes at 70%: time enough to shut a rack down cleanly. Every outlet is battery-backed, and the internal bypass keeps power flowing even if the unit develops a fault.
Eleven minutes of runtime at half load (1350 W) and seven minutes at 70%: time enough to shut a rack down cleanly. Every outlet is battery-backed, and the internal bypass keeps power flowing even if the unit develops a fault.
Runtime of 11 minutes at 50% load (1350 W) and 7 minutes at 70% (1890 W)
All output outlets are battery-backed
C13 outlets: the format used by computer and server power cords
C19 outlets: heavy-duty 16 A outlets for power-hungry equipment
Power factor of 0.9
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
USB port and Smart-Slot for a network management card
Automatic and manual internal bypass
Runtime extendable with additional SRT96BP battery modules
Replaceable battery, reference APCRBC152
Full recharge in 3 hours
Noise level below 55 dBA: active ventilation, better in a technical room
Installed either as a tower or in a rack, with a mounting kit
Weight 31.3 kg
An online UPS for servers and sensitive equipment: online double conversion, 3000 VA / 2700 W, tower format.
Technology & protection: power is fully and continuously regenerated — your servers are never exposed to the mains, with zero transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise.
Power: 3000 VA for 2700 W of real power (0.9 power factor) — almost all of the rated power is available in watts.
Runtime: about 11 minutes at half load (1350 W), 7 minutes at 70%.
Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets.
Active cooling (≈ 55 dB), ideally installed in a technical room.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for servers, storage or network equipment.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
41 999 DHincl. VAT
Availability alert
APC Smart-UPS SRT SRT3000XLI Online UPS - 2700 W / 3000 VA - 8 C13 outlets + 2 C19 outlets
Datasheet (PDF)
Price: 41 999,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT SRT3000XLI Online UPS - 2700 W / 3000 VA - 8 C13 outlets + 2 C19 outlets
Warranty
3 years
Image 1 of 4
APC
Product reference:SMX120RMBP2U
APC Smart-UPS X 120V External Battery Pack Rack/Tower - For SMX 2200VA to 3000VA
Product reference:SMX120RMBP2U
Capacity 1,200 VAh
Enclosed battery cartridge
Maintenance-free sealed lead-acid batteries, suspended electrolyte
2 RBC replacement cartridges
Estimated service life 3 to 5 years
Weight 56.36 kg
Dimensions 432 x 667 x 85 mm
1,200 VAh of reserve in an enclosed maintenance-free sealed lead-acid cartridge. A flat chassis 85 mm high and 56.36 kg, designed for 3 to 5 years of service.
1,200 VAh of reserve in an enclosed maintenance-free sealed lead-acid cartridge. A flat chassis 85 mm high and 56.36 kg, designed for 3 to 5 years of service.
Capacity 1,200 VAh
Enclosed battery cartridge
Maintenance-free sealed lead-acid batteries, suspended electrolyte
2 RBC replacement cartridges
Estimated service life 3 to 5 years
Weight 56.36 kg
Dimensions 432 x 667 x 85 mm
Out of stock Warranty 2 years
14 899 DHincl. VAT
Availability alert
APC Smart-UPS X 120V External Battery Pack Rack/Tower - For SMX 2200VA to 3000VA
Price: 14 899,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 120V External Battery Pack Rack/Tower - For SMX 2200VA to 3000VA
Warranty
2 years
Image 1 of 3
APC
Product reference:SMX120BP
APC Smart-UPS X 120V External Battery Pack Rack/Tower - for SMX 2200VA to 3000VA
Product reference:SMX120BP
Capacity 1,200 VAh
10 battery blocks per string
Enclosed battery cartridge
Maintenance-free sealed lead-acid batteries, suspended electrolyte
Height 4 U in a rack
Estimated service life 3 to 5 years
Rack-mounting brackets and installation guide included
Weight 60.91 kg
Dimensions 17.8 x 48.3 x 43.2 cm
Ten battery blocks per string for 1,200 VAh of reserve, in an enclosed sealed lead-acid cartridge. A 4 U footprint in a rack, 60.91 kg, mounting brackets and installation guide included.
Ten battery blocks per string for 1,200 VAh of reserve, in an enclosed sealed lead-acid cartridge. A 4 U footprint in a rack, 60.91 kg, mounting brackets and installation guide included.
Capacity 1,200 VAh
10 battery blocks per string
Enclosed battery cartridge
Maintenance-free sealed lead-acid batteries, suspended electrolyte
Height 4 U in a rack
Estimated service life 3 to 5 years
Rack-mounting brackets and installation guide included
Weight 60.91 kg
Dimensions 17.8 x 48.3 x 43.2 cm
Boost your system's reliability with the APC Smart-UPS X 120V External Battery Pack Rack/Tower. Ready to ship within 2 weeks, this 4U unit is fitted with sealed lead-acid batteries for optimal performance. Enjoy greater peace of mind with its 10 battery modules per string and a 120 V battery voltage. Install it easily in your rack. Sturdy, efficient and ready for any challenge!
Out of stock Warranty 2 years
12 699 DHincl. VAT
Availability alert
APC Smart-UPS X 120V External Battery Pack Rack/Tower - for SMX 2200VA to 3000VA
Datasheet (PDF)
Price: 12 699,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 120V External Battery Pack Rack/Tower - for SMX 2200VA to 3000VA
Warranty
2 years
Image 1 of 6
APC
Product reference:SRT5KRMXLW-HW
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS
Product reference:SRT5KRMXLW-HW
4,500 W usable output
Terminal block output only: fixed wiring, to be installed by an electrician
208 V or 230 V input, accepted voltage from 160 to 275 V
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Multifunction LCD status and control console
Full recharge in 1 h 30
Rack-mounting kit and rails included
Temperature probe included
Sine wave output
Maintenance-free sealed lead-acid battery, replaceable (APCRBC140)
56 kg
Output entirely wired to a terminal block, to be fitted by an electrician: 4,500 W usable, a Web/SNMP network management card included and a full recharge in 1 h 30. Rack-mounting rails included.
Output entirely wired to a terminal block, to be fitted by an electrician: 4,500 W usable, a Web/SNMP network management card included and a full recharge in 1 h 30. Rack-mounting rails included.
4,500 W usable output
Terminal block output only: fixed wiring, to be installed by an electrician
208 V or 230 V input, accepted voltage from 160 to 275 V
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Multifunction LCD status and control console
Full recharge in 1 h 30
Rack-mounting kit and rails included
Temperature probe included
Sine wave output
Maintenance-free sealed lead-acid battery, replaceable (APCRBC140)
56 kg
Online double-conversion UPS, 4500 W / 5000 VA, RM 208/230V HW - Output connections: (1) hardwire, 3-wire (2PH + G), (1) hardwire, 3-wire (H N + G) - Nominal input voltage: 208V, 230V - Input frequency: 40 - 70 Hz (auto-sensing) - Input connection type: hardwire, 3-wire (2PH + G), hardwire, 3-wire (1PH+N+G) - Weight 56 kg
Out of stock Warranty 3 years
68 899 DHincl. VAT
Availability alert
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS
Price: 68 899,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS
Warranty
3 years
Image 1 of 6
APC
Product reference:SMX3000HVNC
APC Smart-UPS X 3000VA Rack/Tower LCD 200-240V Line-Interactive UPS with SNMP/WEB network card
Product reference:SMX3000HVNC
Usable power 2700 W
Power factor 0.9 — almost all the power usable in watts
8 C13 outlets + 2 reinforced C19 outlets
AP9631 network card pre-installed for remote monitoring
Temperature probe included for environmental monitoring
For servers and critical infrastructure: 2700 W usable, power factor 0.9. AP9631 network card pre-installed, temperature probe included for environmental monitoring.
For servers and critical infrastructure: 2700 W usable, power factor 0.9. AP9631 network card pre-installed, temperature probe included for environmental monitoring.
Usable power 2700 W
Power factor 0.9 — almost all the power usable in watts
8 C13 outlets + 2 reinforced C19 outlets
AP9631 network card pre-installed for remote monitoring
Temperature probe included for environmental monitoring
Professional UPS, convertible between rack and tower, with remote monitoring: line-interactive with voltage regulation, 3000 VA / 2700 W and an LCD display.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without tapping into the battery.
Power: 3000 VA for 2700 W of usable output — several servers plus networking equipment.
Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets for power-hungry equipment.
Management: pre-installed SNMP/Web network card for full remote control and monitoring of the UPS over the network.
Convertible rack or tower form factor.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for servers or business-critical network infrastructure.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 1 year
38 299 DHincl. VAT
Availability alert
APC Smart-UPS X 3000VA Rack/Tower LCD 200-240V Line-Interactive UPS with SNMP/WEB network card
Price: 38 299,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 3000VA Rack/Tower LCD 200-240V Line-Interactive UPS with SNMP/WEB network card
Warranty
1 year
Image 1 of 5
APC
Product reference:SMX3000HV
APC Smart-UPS X 3000VA Line-Interactive UPS - Rack/Tower (SMX3000HV)
Product reference:SMX3000HV
Usable power 2700 W
Power factor 0.9 — almost all the power usable in watts
8 C13 outlets + 2 reinforced C19 outlets, all battery-backed
SmartSlot for an optional network card
Pure sine wave output
LCD control and status display
For servers and enterprise storage: 2700 W usable, power factor 0.9. Every outlet (C13 and C19) is battery-backed.
For servers and enterprise storage: 2700 W usable, power factor 0.9. Every outlet (C13 and C19) is battery-backed.
Usable power 2700 W
Power factor 0.9 — almost all the power usable in watts
8 C13 outlets + 2 reinforced C19 outlets, all battery-backed
SmartSlot for an optional network card
Pure sine wave output
LCD control and status display
Professional UPS, convertible between rack and tower: line-interactive with voltage regulation, 3000 VA / 2700 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without tapping into the battery.
Power: 3000 VA for 2700 W of usable output — its excellent power factor (0.9) lets you use almost all of its capacity in watts.
Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets for power-hungry equipment, all with battery backup.
Pure sine wave output; convertible rack or tower form factor.
Ideal, for example, for servers, storage or business-critical networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 1 year
29 899 DHincl. VAT
Availability alert
APC Smart-UPS X 3000VA Line-Interactive UPS - Rack/Tower (SMX3000HV)
Price: 29 899,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 3000VA Line-Interactive UPS - Rack/Tower (SMX3000HV)
Warranty
1 year
Image 1 of 7
APC
Product reference:SMX2200HV
APC Smart-UPS X 2200VA Rack/Tower LCD 200-240V Line-Interactive UPS
Product reference:SMX2200HV
Usable power 1980 W
Power factor 0.9 — almost all the power usable in watts
Runtime around 25 min at half load (990 W), 16 min at 70%
Runtime extendable with additional battery modules
8 C13 outlets + 2 reinforced C19 outlets
USB port and SmartSlot (optional network card)
Pure sine wave output
4U rack format (tower-convertible)
In a 4U rack (tower-convertible): 1980 W usable, power factor 0.9 — almost all the power usable in watts. Runtime extendable with additional battery modules.
In a 4U rack (tower-convertible): 1980 W usable, power factor 0.9 — almost all the power usable in watts. Runtime extendable with additional battery modules.
Usable power 1980 W
Power factor 0.9 — almost all the power usable in watts
Runtime around 25 min at half load (990 W), 16 min at 70%
Runtime extendable with additional battery modules
8 C13 outlets + 2 reinforced C19 outlets
USB port and SmartSlot (optional network card)
Pure sine wave output
4U rack format (tower-convertible)
Professional UPS, convertible between rack and tower: line-interactive with voltage regulation, 2200 VA / 1980 W and an LCD display.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 2200 VA for 1980 W of usable output — several servers or networking equipment.
Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets for power-hungry equipment.
Convertible rack or tower form factor; runtime can be extended with an additional battery pack.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for servers, storage or business networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 2 years
21 799 DHincl. VAT
Availability alert
APC Smart-UPS X 2200VA Rack/Tower LCD 200-240V Line-Interactive UPS
Datasheet (PDF)
Price: 21 799,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 2200VA Rack/Tower LCD 200-240V Line-Interactive UPS
Warranty
2 years
Image 1 of 4
APC
Product reference:SMX48RMBP2U
APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower Battery System
Product reference:SMX48RMBP2U
Height 2 U in a rack
Enclosed battery cartridge
Maintenance-free sealed lead-acid batteries, suspended electrolyte
2 RBC replacement cartridges
Estimated service life 3 to 5 years
Rack-mounting brackets and installation guide included
Weight 28.64 kg
Dimensions 43.2 x 49 x 8.9 cm
A height of just 2 U for 28.64 kg: it slides into a rack as easily as it lies flat. Enclosed sealed lead-acid battery cartridge, mounting brackets and installation guide included.
A height of just 2 U for 28.64 kg: it slides into a rack as easily as it lies flat. Enclosed sealed lead-acid battery cartridge, mounting brackets and installation guide included.
Height 2 U in a rack
Enclosed battery cartridge
Maintenance-free sealed lead-acid batteries, suspended electrolyte
2 RBC replacement cartridges
Estimated service life 3 to 5 years
Rack-mounting brackets and installation guide included
Weight 28.64 kg
Dimensions 43.2 x 49 x 8.9 cm
Equip yourself with the APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower battery system. This essential product offers a 48 V DC input voltage and a lead-acid battery for dependable performance. Rack-mountable (2U) with a sturdy black design, it measures 49 cm deep, 8.9 cm high and 43.2 cm wide. This 28.64 kg secure system keeps your power uninterrupted, worry-free. An eco-friendly product, compliant with RoHS and REACh, it is also mercury-free and meets Green Premium criteria.
Out of stock Warranty 1 year
9 095 DHincl. VAT
Availability alert
APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower Battery System
Datasheet (PDF)
Price: 9 095,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower Battery System
Warranty
1 year
Image 1 of 5
APC
Product reference:SMC2000I
APC Smart-UPS C 2000VA Line-Interactive UPS (SMC2000I)
Product reference:SMC2000I
Usable power 1300 W
Runtime around 19 min at half load (650 W), 11 min at 70%
6 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port for automatic system shutdown
Tower format
LCD control and status display
Quiet operation (≈ 45 dB)
Tower format for one or several servers: 1300 W usable, runtime of around 19 minutes at half load. Quiet operation (≈ 45 dB).
Tower format for one or several servers: 1300 W usable, runtime of around 19 minutes at half load. Quiet operation (≈ 45 dB).
Usable power 1300 W
Runtime around 19 min at half load (650 W), 11 min at 70%
6 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port for automatic system shutdown
Tower format
LCD control and status display
Quiet operation (≈ 45 dB)
Professional tower UPS for servers: line-interactive with voltage regulation, 2000 VA / 1300 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without tapping into the battery.
Power: 2000 VA for 1300 W of usable output.
Runtime: approx. 19 minutes at half load (650 W), 11 minutes at 70% — generous runtime.
Outlets: 6 C13 outlets + 1 heavy-duty C19 outlet, all with battery backup.
Low-noise operation (≈ 45 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Designed, for example, for one or more servers, storage or business networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 1 year
14 499 DHincl. VAT
Availability alert
APC Smart-UPS C 2000VA Line-Interactive UPS (SMC2000I)
Datasheet (PDF)
Price: 14 499,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS C 2000VA Line-Interactive UPS (SMC2000I)
Warranty
1 year
Image 1 of 4
APC
Product reference:SRT192BP
APC 192V UPS Battery for 5/6kVA Smart-UPS SRT
Product reference:SRT192BP
Compatible with SRT5KRMXLI, SRT5KXLI, SRT6KRMXLI and SRT6KXLI
Capacity 1,920 VAh
Maintenance-free sealed lead-acid batteries, suspended electrolyte
Self-contained battery pack to stand on the floor
2 RBC replacement cartridges
Weight 91 kg
Dimensions 13 x 68.27 x 43.2 cm
Supported models: SRT5KRMXLI, SRT5KXLI, SRT6KRMXLI and SRT6KXLI. A self-contained 91 kg pack to stand on the floor, offering 1,920 VAh of reserve in maintenance-free sealed lead-acid batteries.
Supported models: SRT5KRMXLI, SRT5KXLI, SRT6KRMXLI and SRT6KXLI. A self-contained 91 kg pack to stand on the floor, offering 1,920 VAh of reserve in maintenance-free sealed lead-acid batteries.
Compatible with SRT5KRMXLI, SRT5KXLI, SRT6KRMXLI and SRT6KXLI
Capacity 1,920 VAh
Maintenance-free sealed lead-acid batteries, suspended electrolyte
Self-contained battery pack to stand on the floor
2 RBC replacement cartridges
Weight 91 kg
Dimensions 13 x 68.27 x 43.2 cm
Choose the APC 192V UPS Battery for 5/6kVA Smart-UPS SRT. Benefit from immediate availability with a shorter delivery time. Its sleek black design blends seamlessly into your environment. Its lead-acid batteries offer exceptional reliability. Enjoy peace of mind with its full warranty. Environmentally responsible, with Green Premium certification and free of SVHC substances. Compliant with the EU RoHS directive. Ideal for a stand-alone installation, with a 192V voltage for optimal performance.
Out of stock Warranty 1 year
16 699 DHincl. VAT
Availability alert
APC 192V UPS Battery for 5/6kVA Smart-UPS SRT
Datasheet (PDF)
Price: 16 699,00 DH incl. VAT
Out of stock
Availability alert
APC 192V UPS Battery for 5/6kVA Smart-UPS SRT
Warranty
1 year
Image 1 of 4
APC
Product reference:SRT10KXLI
APC Smart-UPS SRT 10000VA Online UPS (SRT10KXLI)
Product reference:SRT10KXLI
10 kW usable output (power factor of 1)
6 C13 outlets, the format used by computer and server power cords, all battery-backed
4 C19 outlets, heavy-duty 16 A, also battery-backed
Terminal block output also backed by the battery
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Internal bypass, automatic and manual
Full recharge in 1 h 30
Multifunction LCD status and control console
Temperature probe included
Emergency power off switch
Single-phase 230 V or three-phase 400 V input depending on the installation
Sine wave output
55 dB noise level, to be installed in a technical room
As many watts as kVA: all 10 kW are usable, with no loss from the power factor. Ten outlets, all battery-backed, and the Web/SNMP management card included.
As many watts as kVA: all 10 kW are usable, with no loss from the power factor. Ten outlets, all battery-backed, and the Web/SNMP management card included.
10 kW usable output (power factor of 1)
6 C13 outlets, the format used by computer and server power cords, all battery-backed
4 C19 outlets, heavy-duty 16 A, also battery-backed
Terminal block output also backed by the battery
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Internal bypass, automatic and manual
Full recharge in 1 h 30
Multifunction LCD status and control console
Temperature probe included
Emergency power off switch
Single-phase 230 V or three-phase 400 V input depending on the installation
Sine wave output
55 dB noise level, to be installed in a technical room
A high-power online UPS for critical infrastructure: online double conversion, 10 kW / 10 kVA.
Technology & protection: power is constantly rebuilt — the equipment receives flawless power without ever touching the mains, with zero transfer time. Maximum protection against outages, surges, voltage fluctuations and electrical noise.
Power: 10 kVA for 10 kW of real power (power factor of 1) — all of the rated power is available in watts, enough for a full server rack.
Outlets: 6 C13 outlets + 4 heavy-duty C19 outlets + terminal block connection.
Pure sine wave output; active cooling (≈ 55 dB), to be installed in a technical room.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Designed, for example, for server racks, data centres and critical infrastructure.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
103 399 DHincl. VAT
Availability alert
APC Smart-UPS SRT 10000VA Online UPS (SRT10KXLI)
Datasheet (PDF)
Price: 103 399,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT 10000VA Online UPS (SRT10KXLI)
Warranty
3 years
Image 1 of 5
APC
Product reference:SRT6KXLI
APC Smart-UPS SRT 6000VA Online UPS (SRT6KXLI)
Product reference:SRT6KXLI
6,000 W usable output (power factor of 1)
Around 8 minutes of runtime at 50% load (3,000 W), 5 minutes at 70% (4,200 W)
6 C13 outlets, the format used by computer and server power cords, all battery-backed
4 C19 outlets, heavy-duty 16 A, also battery-backed
Terminal block output also backed by the battery
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Internal bypass, automatic and manual
Full recharge in 1 h 30
Multifunction LCD status and control console
Temperature probe included
Emergency power off switch
Sine wave output
55 dB noise level, to be installed in a technical room
174 mm wide, 60 kg
Around 8 minutes of runtime at half load (3,000 W) and 6,000 W genuinely available, with no loss from the power factor. Full recharge in 1 h 30, in a chassis only 17 cm wide.
Around 8 minutes of runtime at half load (3,000 W) and 6,000 W genuinely available, with no loss from the power factor. Full recharge in 1 h 30, in a chassis only 17 cm wide.
6,000 W usable output (power factor of 1)
Around 8 minutes of runtime at 50% load (3,000 W), 5 minutes at 70% (4,200 W)
6 C13 outlets, the format used by computer and server power cords, all battery-backed
4 C19 outlets, heavy-duty 16 A, also battery-backed
Terminal block output also backed by the battery
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Internal bypass, automatic and manual
Full recharge in 1 h 30
Multifunction LCD status and control console
Temperature probe included
Emergency power off switch
Sine wave output
55 dB noise level, to be installed in a technical room
174 mm wide, 60 kg
A high-power online UPS for critical infrastructure: online double conversion, 6000 VA / 6000 W.
Technology & protection: power is constantly rebuilt — the equipment receives flawless power without ever touching the mains, with zero transfer time. Maximum protection against outages, surges, voltage fluctuations and electrical noise.
Power: 6000 VA for 6000 W of real power (power factor of 1) — all of the rated power is available in watts.
Outlets: 6 C13 outlets + 4 heavy-duty C19 outlets + terminal block connection.
Active cooling (≈ 55 dB), to be installed in a technical room.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Designed, for example, for server racks, data centres and critical infrastructure.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
73 499 DHincl. VAT
Availability alert
APC Smart-UPS SRT 6000VA Online UPS (SRT6KXLI)
Datasheet (PDF)
Price: 73 499,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT 6000VA Online UPS (SRT6KXLI)
Warranty
3 years
Image 1 of 2
APC
Product reference:SMX1500RMI2UNC
APC Smart-UPS X 1500VA Rack/Tower LCD 230V Line-Interactive UPS with network card
Product reference:SMX1500RMI2UNC
Usable power 1200 W
Power factor 0.8 — a wide margin of usable power in watts
Runtime around 17 min at half load (600 W), 10 min at 70%
Runtime extendable with additional battery modules
8 C13 outlets, all battery-backed
Built-in network card for remote control and monitoring
Quiet operation (40 dB)
Monitored remotely through its built-in network card: 1200 W usable, power factor 0.8. Runtime of around 17 minutes at half load, quiet operation (40 dB).
Monitored remotely through its built-in network card: 1200 W usable, power factor 0.8. Runtime of around 17 minutes at half load, quiet operation (40 dB).
Usable power 1200 W
Power factor 0.8 — a wide margin of usable power in watts
Runtime around 17 min at half load (600 W), 10 min at 70%
Runtime extendable with additional battery modules
8 C13 outlets, all battery-backed
Built-in network card for remote control and monitoring
Quiet operation (40 dB)
Professional rack/tower convertible UPS with remote monitoring: line-interactive with voltage regulation, 1500 VA / 1200 W and LCD display.
Technology & protection: it switches to battery the moment the power fails, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 1500 VA for 1200 W of usable power.
Outlets: 8 C13 outlets, all with battery backup.
Management: built-in network card for remote control and monitoring. Runtime can be extended with an additional battery pack.
LCD display: shows load, battery level and remaining runtime at a glance — monitor the UPS without any software.
Ideal, for example, for a server, storage or network equipment in a rack or tower setup.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
On order Warranty 3 years
25 699 DHincl. VAT
Order via WhatsApp — APC Smart-UPS X 1500VA Rack/Tower LCD 230V Line-Interactive UPS with network card
Datasheet (PDF)
Price: 25 699,00 DH incl. VAT
On order
Order via WhatsApp — APC Smart-UPS X 1500VA Rack/Tower LCD 230V Line-Interactive UPS with network card
Warranty
3 years
Image 1 of 4
APC
Product reference:SMT3000RMI2U
APC Smart-UPS 3000VA Line-Interactive UPS 2U Rack (SMT3000RMI2U)
Product reference:SMT3000RMI2U
Usable power 2700 W
Power factor 0.9 — almost all the power usable in watts
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port for automatic system shutdown
Pure sine wave output
LCD control and status display
For servers and network racks: 2700 W usable with an excellent power factor (0.9), so almost all the power is usable in watts. C13 outlets and a reinforced C19, all battery-backed.
For servers and network racks: 2700 W usable with an excellent power factor (0.9), so almost all the power is usable in watts. C13 outlets and a reinforced C19, all battery-backed.
Usable power 2700 W
Power factor 0.9 — almost all the power usable in watts
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port for automatic system shutdown
Pure sine wave output
LCD control and status display
Professional UPS for servers and network cabinets: line-interactive with voltage regulation, 3000 VA / 2700 W, 2U rack form factor.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 3000 VA for 2700 W of usable output — its excellent power factor (0.9) lets you use almost all of its capacity in watts.
Outlets: 8 C13 outlets + 1 heavy-duty C19 outlet, all with battery backup.
Pure sine wave output, ideal for servers and sensitive power supplies.
Ideal, for example, for servers, storage or business-critical networking equipment in a rack.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
27 599 DHincl. VAT
Availability alert
APC Smart-UPS 3000VA Line-Interactive UPS 2U Rack (SMT3000RMI2U)
Price: 27 599,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS 3000VA Line-Interactive UPS 2U Rack (SMT3000RMI2U)
Warranty
3 years
Image 1 of 2
APC
Product reference:SMT1500I
APC Smart-UPS 1500VA LCD 230V Tower Line-Interactive UPS
Product reference:SMT1500I
1000 W usable — a complete workstation or a small server
Runtime: around 23 minutes at half load (500 W), 12 minutes at 70%
8 C13 outlets (computer and server power cords)
Pure sine wave output
USB port for automatic, clean shutdown
SmartSlot for an optional network/management card
Pure sine wave output, for a demanding workstation or a small server. Comfortable runtime at half load, SmartSlot for an optional network card.
Pure sine wave output, for a demanding workstation or a small server. Comfortable runtime at half load, SmartSlot for an optional network card.
1000 W usable — a complete workstation or a small server
Runtime: around 23 minutes at half load (500 W), 12 minutes at 70%
8 C13 outlets (computer and server power cords)
Pure sine wave output
USB port for automatic, clean shutdown
SmartSlot for an optional network/management card
Professional tower UPS to protect a workstation or a small server: line-interactive with voltage regulation, 1500 VA / 1000 W and an LCD display.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without eating into the battery.
Power: 1500 VA for 1000 W of usable output — a complete workstation or a small server.
Runtime: approx. 23 minutes at half load (500 W), 12 minutes at 70%.
Outlets: 8 C13 outlets (for computer and server power cords).
Management: LCD display that shows the status, load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a demanding workstation, a small server or a NAS.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
11 099 DHincl. VAT
Availability alert
APC Smart-UPS 1500VA LCD 230V Tower Line-Interactive UPS
Datasheet (PDF)
Price: 11 099,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS 1500VA LCD 230V Tower Line-Interactive UPS
Warranty
3 years
Image 1 of 4
APC
Product reference:SMT1500RMI2U
APC Smart-UPS 1500 VA Line-Interactive UPS - 2U Rack (SMT1500RMI2U)
Product reference:SMT1500RMI2U
Usable power 1000 W
Runtime around 25 min at half load (500 W), 14 min at 70%
4 C13 outlets
USB/RS-232 port for automatic system shutdown
SmartSlot for an optional network card
Pure sine wave output
LCD control and status display
For a server or a network rack: 1000 W usable, runtime of around 25 minutes at half load. LCD control display and SmartSlot port to add a network card.
For a server or a network rack: 1000 W usable, runtime of around 25 minutes at half load. LCD control display and SmartSlot port to add a network card.
Usable power 1000 W
Runtime around 25 min at half load (500 W), 14 min at 70%
4 C13 outlets
USB/RS-232 port for automatic system shutdown
SmartSlot for an optional network card
Pure sine wave output
LCD control and status display
Professional UPS to protect servers and networking equipment: line-interactive with voltage regulation, 1500 VA / 1000 W, 2U rack form factor.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery — clean, stable power at all times.
Power: 1500 VA for 1000 W of usable output.
Runtime: approx. 25 minutes at half load (500 W), 14 minutes at 70% — plenty of time to shut your machines down properly.
Outlets: 4 C13 outlets (for computer and server power cords).
Mounts directly in an IT cabinet, with discreet operation.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a small server, a switch or networking equipment in a rack.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
14 599 DHincl. VAT
Availability alert
APC Smart-UPS 1500 VA Line-Interactive UPS - 2U Rack (SMT1500RMI2U)
Datasheet (PDF)
Price: 14 599,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS 1500 VA Line-Interactive UPS - 2U Rack (SMT1500RMI2U)
Warranty
3 years
Image 1 of 5
APC
Product reference:SMX2200RMHV2U
APC Smart-UPS X 2200VA Line-Interactive UPS - Rack/Tower (SMX2200RMHV2U)
Product reference:SMX2200RMHV2U
Usable power 1980 W
Power factor 0.9 — almost all the power usable in watts
Runtime around 25 min at half load (990 W), 16 min at 70%
Runtime extendable with additional battery modules
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
LCD control and status display
For servers and business network equipment: 1980 W usable with an excellent power factor (0.9). Runtime of around 25 minutes at half load.
For servers and business network equipment: 1980 W usable with an excellent power factor (0.9). Runtime of around 25 minutes at half load.
Usable power 1980 W
Power factor 0.9 — almost all the power usable in watts
Runtime around 25 min at half load (990 W), 16 min at 70%
Runtime extendable with additional battery modules
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
LCD control and status display
Professional UPS, convertible between rack and tower: line-interactive with voltage regulation, 2200 VA / 1980 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 2200 VA for 1980 W of usable output — its excellent power factor (0.9) lets you use almost all of its capacity in watts.
Runtime: approx. 25 minutes at half load (990 W), 16 minutes at 70%.
Outlets: 8 C13 outlets + 1 heavy-duty C19 outlet for power-hungry equipment.
Convertible rack or tower form factor.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for servers, storage or business networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
30 299 DHincl. VAT
Availability alert
APC Smart-UPS X 2200VA Line-Interactive UPS - Rack/Tower (SMX2200RMHV2U)
Datasheet (PDF)
Price: 30 299,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 2200VA Line-Interactive UPS - Rack/Tower (SMX2200RMHV2U)
Warranty
3 years

Estimate the delivery time for your city:

WhatsAppMessage usChat