Skip to main content

Welcome to the new iris.ma

We rebuilt everything for you

Same team, same standards

Pay nowView my order
iris.ma — The Tech ExpertBack to school
Menu
Visit the APC store

APC Smart-UPS SRT 3000VA Double-Conversion Online UPS Rack 230V with network card (SRT3000RMXLI-NC)

Delivered with its network management card already installed, with environmental monitoring on top. 2700 W genuinely available and eleven minutes of runtime at half load (1350 W) to shut the servers down cleanly.

  • Network management card installed, with environmental condition monitoring
  • 2700 W genuinely available
  • Runtime of 11 minutes at 50% load (1350 W) and 7 minutes at 70% (1890 W)
  • 8 C13 outlets, the format used by computer and server power cords
  • 2 C19 outlets, heavy-duty 16 A for power-hungry equipment
  • Pure sine wave output
  • LCD display: load, battery level and remaining runtime at a glance
  • Automatic and manual internal bypass
  • Runtime extendable with additional SRT96RMBP battery modules
  • Replaceable battery, reference APCRBC152
  • Full recharge in 3 hours
  • Emergency power off switch
  • 2U rack format, rails and mounting brackets included
  • 55 dBA noise level: active ventilation, to be installed in a technical room
  • Weight 31.3 kg
Ref.: SRT3000RMXLI-NC
APC Smart-UPS SRT 3000VA Double-Conversion Online UPS Rack 230V with network card (SRT3000RMXLI-NC) — image 1
APC Smart-UPS SRT 3000VA Double-Conversion Online UPS Rack 230V with network card (SRT3000RMXLI-NC) — image 2
APC Smart-UPS SRT 3000VA Double-Conversion Online UPS Rack 230V with network card (SRT3000RMXLI-NC) — image 3
APC Smart-UPS SRT 3000VA Double-Conversion Online UPS Rack 230V with network card (SRT3000RMXLI-NC) — image 4

Non-contractual photos

The visuals on this page are supplied by the manufacturer. They are frequently produced for a whole range — not for the exact model you are viewing: what you see in the photo is never a promise of what is included.

No exchange, return or cancellation will be accepted on the grounds that something seen in a photo (accessory, port, colour, keyboard layout, packaging…) is not found on the delivered product. Only the specifications written on the page are binding for the order.

What the image does not guarantee:

  • Outlets : the number and type of outlets (Schuko, IEC) vary between versions of a single photographed series.
  • Options : LCD display, USB or RJ45 port, SNMP network card and rack kit are supplied only if the specifications say so.
  • Batteries : the additional battery modules photographed next to the UPS are sold separately.
  • Runtime : it depends on the load actually plugged in, never on what the image shows.
  • Colour : one image often serves several colours, and the shade you see depends on studio lighting as much as on your screen settings; the colour sold is the one in the title and the specifications.
  • Props and accessories : the items shown around the product (cables, stands, decorative objects, content displayed on screen) are not included unless explicitly stated.
  • Packaging : boxes, labels and bundles change with the manufacturer's revisions: the packaging delivered may differ from the one in the photo.

What is binding: the product title, this page's technical specifications, the description and, when provided, the manufacturer's PDF datasheet available in the downloads.

The slightest doubt about a specification? Contact us before ordering and we will check for you.

(+212) 05 30 31 64 21+212 6 64 10 46 24service.client@iris.ma

See our terms and conditions of sale.

1/4
48 899,00 DHincl. VAT

Configuration · APC Smart-UPS SRT Rack

Out of stock

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Can’t wait?

Ask for an alternative on WhatsApp

Quick reply

Manufacturer's datasheetView the PDF · 90 Ko — downloadable

Product overview

An online UPS for servers, with remote monitoring: online double conversion, 3000 VA / 2700 W, rack format.
Technology & protection: power is fully and continuously regenerated — the servers are never exposed to the mains, with zero transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise.
Power: 3000 VA for 2700 W of real power.
Runtime: its battery takes over during a power cut, giving you time to shut the servers down cleanly; runtime can be extended with additional battery modules.
Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets.
Management: built-in network card to control and monitor the UPS remotely over the network — a real asset in a server room.
Active cooling, to be installed in a rack or technical room.
Designed, for example, for servers or critical network infrastructure.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.

See all the specifications ↓
Request a quoteShare:

Technical specifications

Technical specifications
Output voltage230 V (220 / 240 V)
Waveform typeSine wave
Output harmonic distortionLess than 2%
Output connections8 IEC 60320 C13 outlets + 2 IEC 60320 C19 outlets + 2 IEC jumpers
Input voltage230 V (220 / 240 V)
Input frequency40 - 70 Hz auto-sensing
Input connections1 IEC 60320 C20 inlet; standard Schuko CEE 7 / EU1-16P and British BS 1363A plugs
Cord length2.44 m
Voltage range100 - 275 V adjustable at half load
Battery typeSealed lead-acid, 96 V bus
Typical recharge time3 hours
Interface port1 USB port, 1 SmartSlot, 1 emergency power off (EPO)
User interfaceMultifunction LCD status and control console
Audible alarmAudible and visual alarms according to severity level
Weight (kg)31.3 kg
Dimensions (W x D x H) (mm)432 x 635 x 85 mm
Estimated battery service life (years)3 to 5 years
TechnologyOn-line
Power (VA)3,000 VA
Voltage stabiliserYes
Technical specifications (continued)
Box contentsSoftware CD · Documentation CD · Installation guide · Network management card · Rack-mount brackets · Rack-mount support rails · USB cable · Warranty card
Replacement batteryAPCRBC152 (1 cartridge)
Communication card slotNo free slot: the network management card (Network Management Card 3 with environmental monitoring) is preinstalled
Rack height2U
Surge protection and filtering340 J
Transfer/switching time0 ms (continuous double conversion)
BypassInternal bypass (automatic and manual)
Audible noise55 dBA
Crest factor3:1
Output frequency50/60 Hz +/- 3 Hz, synchronised to mains
Phase (output/input)Single-phase / Single-phase
Output typeC13 outlets
Power (W)2,700 W
Runtime50% load (1,350 Watts): 11 minutes / 70% load (1,890 Watts): 7 minutes
External battery packsSRT96RMBP external battery packs (1 to 10 packs, from 1515 to 10605 VAh)
Form factorRack
Battery-backed outlets9 outlets or more
Control & communicationNetwork (SNMP / monitoring)
Warranty3 years

Downloads

Customer reviews

No reviews yet

Be the first to review this product and help other customers.

Write a review
Your rating
5/5

Shown publicly with your review.

Never published — a confirmation email will be sent to you.

Tell us about the product — in a few lines:

  • what you liked in everyday use;
  • the quality and performance you found;
  • who you would recommend it to, and why.

A question about an order, a delivery or a payment? Write to us and we will reply to you directly.

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Frequently asked questions about this product

Is the network card installed on the SRT3000RMXLI-NC?
Yes, the network management card is already installed, with environmental monitoring as a bonus: the room's temperature and humidity are reported in the same interface.
How long does the SRT3000RMXLI-NC run on battery?
11 minutes at 50% load, i.e. 1350 W, and 7 minutes at 70%, i.e. 1890 W. A full recharge takes 3 hours, and the runtime can be extended with SRT96RMBP modules.
Does the SRT3000RMXLI-NC plug into a wall socket?
Yes: the input accepts a C20, Schuko or British connection. No hardwiring or electrician needed, unlike higher-power UPSs connected via a terminal block.
Which outlets does the UPS have on the output side?
Eight C13 outlets, two heavy-duty 16 A C19 outlets and two IEC jumpers. C19 is the format for high-current equipment: high-power servers, storage arrays.
How much rack space does the SRT3000RMXLI-NC take up?
2U high (8.5 cm), 43.2 cm wide and 63.5 cm deep, for 31.3 kg. The rails and mounting brackets are supplied; depth is the point to check on a shallow cabinet.
Can the UPS be serviced without shutting down the rack?
Yes, thanks to an automatic and manual internal bypass, and conversely an emergency power off switch lets you cut everything in one move.
Is the SRT3000RMXLI-NC's battery replaceable?
Yes, under the reference APCRBC152. It is the wear part: after a few years, it is the battery you replace, not the UPS.
Is the APC Smart-UPS SRT3000RMXLI-NC new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for a period of 3 years. It delivers a pure sine wave, accepts an input of 40 to 70 Hz, and runs at 55 dBA: fan-cooled, to be installed in a technical room. The datasheet covers the rest.

Trending

View the APC archive

Estimate the delivery time for your city:

Chat on WhatsApp

Scan with my phone

The simplest way: open your phone camera and point it at this code. The chat opens with your message ready.

Open WhatsApp Web

Works if your phone is already linked to this computer.

Prefer to call? (+212) 05 30 31 64 21