2700 W genuinely available and eleven minutes of runtime at half load (1350 W): time enough to shut a rack down cleanly. 2U chassis, LCD display, internal bypass and battery modules to go further.
2700 W genuinely available
Runtime of 11 minutes at 50% load (1350 W) and 7 minutes at 70% (1890 W)
8 C13 outlets, the format used by computer and server power cords
2 C19 outlets, heavy-duty 16 A for power-hungry equipment
Pure sine wave output
LCD display: load, battery level and remaining runtime at a glance
Free slot for a network management card
Automatic and manual internal bypass
Runtime extendable with additional SRT96RMBP battery modules
Replaceable battery, reference APCRBC152
Full recharge in 3 hours
Emergency power off switch
2U rack format, rails and mounting brackets included
55 dBA noise level: active ventilation, to be installed in a technical room
An online UPS for servers and network racks: online double conversion, 3000 VA / 2700 W, rack format. Technology & protection: power is constantly rebuilt — the equipment receives flawless power without ever touching the mains, with zero transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise. Power: 3000 VA for 2700 W of real power. Runtime: its battery takes over during a power cut, giving you time to shut the servers down cleanly or to hand over to a generator; runtime can be extended with additional battery modules. Outlets: 8 C13 outlets + 2 heavy-duty C19 outlets. Active cooling, to be installed in a rack or technical room. Designed, for example, for servers, network equipment or critical business hardware. Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How long does the SRT3000RMXLI run on battery?
11 minutes at 50% load, i.e. 1350 W, and 7 minutes at 70%, i.e. 1890 W. Enough to shut down a rack cleanly, or to let a generator take over. A full recharge then takes 3 hours.
Does this 3000 VA unit really deliver 2700 W?
Yes, 2700 W are actually available. It is this value in watts that you should compare with the combined consumption of your servers, never the 3000 VA in the name. The output voltage can be set to 220, 230 or 240 V.
Which outlets does the SRT3000RMXLI have?
Eight C13 outlets, two heavy-duty 16 A C19 outlets and two IEC jumpers. The input accepts a C20, Schuko or British connection, with a 2.44 m cord — no hardwiring to have installed.
How much rack space does the SRT3000RMXLI take up?
2U high, but 63.5 cm deep: measure your cabinet before ordering. It weighs 31.3 kg and goes at the bottom of the rack; rails and mounting brackets are supplied.
Is the output a pure sine wave?
Yes, the output is a sine wave, with harmonic distortion below 2% and a crest factor of 3:1. The power is continuously regenerated by double conversion, with no transfer time.
Can the UPS be serviced without shutting down the servers?
Yes, thanks to an automatic and manual internal bypass: mains power continues to supply the equipment. Conversely, an emergency power off switch lets you cut everything in one move.
Is the SRT3000RMXLI's battery replaceable?
Yes, under the reference APCRBC152, with a stated service life of 3 to 5 years. The runtime can also be extended with SRT96RMBP modules, up to ten daisy-chained.
Can the SRT3000RMXLI stay in an office?
It is better installed in a technical room: it is rated at 55 dBA and gives off 703 BTU/h. It is fan-cooled, and this heat must be able to escape — a closed cupboard is not suitable.
How do you monitor the SRT3000RMXLI?
Through a USB port, a free card slot for network monitoring, and a front-panel multifunction LCD console that shows load, battery level and remaining runtime. Alarms are audible and visual, graded by severity.
Is the APC Smart-UPS SRT SRT3000RMXLI new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for a period of 3 years. The box contains the rails and mounting brackets, a USB cable, the installation guide and the CDs. The datasheet covers the rest.
A free-standing tower on castors, with an LCD screen showing the load, the battery status and the voltages. Around 16 minutes of runtime at half load, extendable with up to four battery cabinets.
•Around 16 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
•Internal bypass and maintenance bypass as standard
16 kW genuinely available and around 14 minutes of runtime at half load, extendable with up to four battery cabinets. Terminal block input and output, for hard-wired infrastructure.
•16 kW usable output
•Around 14 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
Three reinforced 16 A outlets for power-hungry hardware, eight server outlets, and batteries that are changed without cutting the power. Under 40 dB at one metre, in a rack as in a tower.
•8 C13 outlets: the format of computer and server power cords
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
All the power available in watts: 10,000 W usable, as many as the VA. Around 7 minutes of runtime at half load (5000 W) to shut down a full rack cleanly, in only 4U.
For a whole infrastructure: 9 minutes of runtime at half load (5000 W) and 5 minutes at 70%, the time it takes to switch over to a generator. 94% efficiency at full load and internal bypass.
A maintenance bypass supplied as standard allows the UPS to be replaced without shutting down the equipment it powers. Around 15 minutes of runtime at half load (4 000 W), extendable with four battery cabinets.
•Around 15 minutes of runtime at half load (4 000 W)
•Runtime extendable with one to four external battery cabinets
Four U in a rack and a battery recharged in 3 hours: it is ready to go again quickly after a cut. Around 11 minutes of runtime at half load (3000 W) and 7 minutes at 70%.
Built-in network card: monitoring and control happen remotely, from the company network. 1980 W genuinely available and ten output sockets, two of them reinforced 16 A, in a chassis meant for the rack.
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
•4 C19 outlets, heavy-duty 16 A, also battery-backed
49 999 DHincl. VAT49 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•3 C19 outlets: reinforced 16 A outlets for power-hungry equipment
•Terminal block input: fixed wiring, to be installed by an electrician
Up to four external battery modules extend the 10.5 minutes of runtime at half load. The 2U rack mounting kit, the output cords and the USB cable are included.
•Runtime: 10.5 min at half load, 3.5 min at full load
•Runtime extendable by up to 4 external battery modules
•C13 outlets: the format of computer and server power cords
Every outlet is battery-backed, with around 11 minutes of runtime at half load (990 W). Automatic and manual internal bypass, LCD screen and a detachable 2.44 m cord supplied.
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
2400 W genuinely available and 13.5 minutes of battery life at half load (1200 W): time enough to save and shut down cleanly. Under 37 dB, it can stay beside the workstation it protects.
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
Three reinforced 16 A outlets for power-hungry hardware, eight server outlets, and batteries that are changed without cutting the power. Under 40 dB at one metre, in a rack as in a tower.
•8 C13 outlets: the format of computer and server power cords
Built-in network card: monitoring and control happen remotely, from the company network. 1980 W genuinely available and ten output sockets, two of them reinforced 16 A, in a chassis meant for the rack.
16 minutes of runtime at half load (800 W), and under 37 dB: it can sit next to a workstation without being heard. Its batteries are replaced without cutting the power.
•16 minutes of runtime at half load (800 W)
•7 minutes of runtime at full load
•6 C13 outlets, the format used by computer and server cords
Twenty minutes of runtime at half load (2 400 W), extended to several hours with up to four external battery cabinets. The standard maintenance bypass allows the unit to be swapped without shutting down the equipment.
•Around 20 minutes of runtime at half load (2 400 W)
Quiet at under 37 dB, it holds 11.5 minutes at half load (400 W): enough to save and shut down a NAS or a small server without losing anything. Its batteries are replaced without cutting the power.
•11.5 minutes of runtime at half load (400 W)
•5 minutes of runtime at full load
•4 C13 outlets, the format used by computer and server cords
