Best seller
Ugreen
Ugreen RJ45 Flat CAT6 Ethernet Cable - 1 metre (50173)
In stock
45 DHincl. VAT45,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Visit the TP-Link store
TP-Link LS106P 6-Port 10/100 Mbps Desktop Switch with 4 PoE+ Ports (LS106P)
Add PoE in a few seconds: plug it in and it works, with no configuration at all. Ultra-compact fanless housing, Extend mode to carry transmission up to 250 m.
- Total PoE+ budget of 65 W, up to 30 W per port (802.3af/at)
- Plug-and-play operation, no configuration required
- Extend mode: data and PoE transmission up to 250 m
- Automatic PoE recovery (restarts devices that have hung)
- Isolation mode to separate client traffic
- Fanless, silent design
- Ultra-compact 99.8 × 98 × 25 mm format
Ref.: LS106P
New
335,00 DHincl. VAT
In stock
Earn 4 DH in loyalty credit with this purchaseHow does it work?Loyalty credit capped at 300 DH per order.
Receive it between Wed 23 Sept and Fri 25 Sept — delivery 40 DH incl. VAT all over Morocco
Free in-store collection: Casablanca (within 24 h) · Témara (within 48 h)
1 year warranty — free repair in Morocco if it breaks down during the warranty period
100% secure payment: Bank transfer · Bank card · Cash on delivery · Certified cheque
Product overview
TP-Link LS106P 6-port 10/100 Mbps PoE+ desktop switch: add PoE to your network in seconds.
Ports: 6 10/100 Mbps ports, 4 of them PoE+, with a 65 W budget.
PoE: powers IP cameras and Wi-Fi access points with no mains socket nearby.
Simplicity: plug-and-play, no configuration, compact and silent fanless casing.
Bonus: Extend mode up to 250 m, automatic PoE recovery.
Use cases: small home or business network, video surveillance.
An affordable, reliable PoE+ switch to extend a network the easy way.
Request a quoteShare:
Technical specifications
| MAC table size | 2,000 entries |
|---|---|
| Number of VLANs | None |
| Interfaces | 6 RJ45 10/100 Mbps ports including 4 PoE+ (ports 1 to 4), auto-negotiation, Auto MDI/MDIX |
| PoE ports | 4 PoE+ ports (802.3af/at), up to 30 W per port |
| Total PoE budget | 65 W |
| Network standards | IEEE 802.3, 802.3i, 802.3u, 802.3x, 802.3af, 802.3at |
| Switching capacity | 1.2 Gbps |
| Forwarding rate | 0.893 Mpps |
| Packet buffer | 2,048 bytes |
| Management modes | None (plug-and-play) |
| Cloud management platform | None |
| Layer 2 features | 802.3x flow control, Extend mode up to 250 m, PoE auto recovery, 2 KB jumbo frames |
| IP routing | None |
| Power consumption | 66.53 W maximum |
| Dimensions (W x D x H) | 99.8 x 98 x 25 mm |
| Package contents | Switch, AC adapter, rubber feet, setup guide |
|---|---|
| Number of ports | 6 to 10 ports |
| Managed | No |
| Security features | Isolation mode: client traffic segregation (ports 1 to 4) |
| Power supply | External AC adapter 53.5 V DC, 1.31 A |
| Cooling system | Fanless |
| Operating temperature | 0 to 40 °C |
| PoE power | Yes |
| Port speed | 100 Mbps (Fast Ethernet) |
| PoE standard | PoE+ (802.3at, up to 30 W/port) |
| PoE budget | Up to 65 W |
| Fibre slots (SFP) | No |
| Mounting | Desktop |
| Warranty | 1 year |
Downloads
Customer reviews
No reviews yet
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How many ports on the LS106P provide PoE power?
Four out of six. Ports 1 to 4 deliver 802.3af/at PoE+, up to 30 W each, within a total budget of 65 W. The other two ports serve as uplinks to the router or main switch, without power.
Are the ports on this switch Gigabit?
No: all six ports are 10/100 Mbps. This is the point to check before connecting very high-definition cameras or a recorder: 100 Mbps is enough for a few video streams, but the port will not go any faster. Total capacity is 1.2 Gbps.
Can Extend mode reach 250 m?
Yes, on ports 1 to 4 — but the speed then drops to 10 Mbps. The range increases from 100 to 250 metres, for both data and power. Enough for an isolated camera at the far end of a plot, not enough for a high-definition stream.
Can you isolate the ports from one another without knowing how to configure a VLAN?
Yes, with Isolation mode, which you enable in a single move: connected devices can no longer see each other and communicate only with the uplink. It is the simplest way to separate cameras on an unmanaged switch.
What happens if a powered camera stops responding?
PoE auto recovery cuts and then restores power to the port to restart the device. A frozen camera therefore restarts on its own, with no on-site intervention — the most useful feature of this small switch on a spread-out installation.
How is this switch powered, and how much power does it draw?
By an external 53.5 V, 1.31 A power adapter, supplied with the switch: plan for a power outlet and room for the adapter. Power consumption reaches 66.53 W with the full 65 W of PoE in use. The case is fanless, so it is completely silent.
How much space does this switch take up, and which cable should you use?
The case measures 99.8 × 98 × 25 mm, barely bigger than a deck of cards. For cabling, Category 5 or higher is enough at 100 Mbps, over 100 m maximum in normal operation — the range is only extended in Extend mode.
Do you need to configure this switch before plugging it in?
No: it is plug-and-play, with no interface and no app. Extend, Isolation and PoE recovery modes are set with a physical switch on the case, not in software. Jumbo frames go up to 2 KB and the MAC address table holds 2,000 entries.
Is the switch new, and where can I find its datasheet?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's document covers the LS106P, its three operating modes and its environmental conditions in detail: datasheet (PDF).
