Compact Multi-Gigabit switch for your Wi-Fi 6/6E access points and NAS: PoE++ 60 W per port and a 10 Gbps SFP+ uplink. Plug-and-play, no configuration required.
8 Multi-Gigabit 2.5G ports (100M/1G/2.5G) PoE++
1 SFP+ 10 Gbps port (uplink or NAS)
PoE++ (802.3bt), 60 W per port, 100 W total budget
The ZyXEL XMG-108HP switch offers 8 ports at 2.5 GbE with 60-watt PoE++, for a total budget of 100 watts. The XMG-108HP also has a 10 Gbps SFP+ port for an uplink or a link to a NAS. Plug & Play, the ZyXEL XMG-108HP is simple to deploy.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
What does PoE++ bring to the ZyXEL XMG-108HP?
Up to 60 W per port, twice as much as standard PoE+, within a total budget of 100 W. That is what multi-radio Wi-Fi 6E access points, heated motorised cameras and network-powered digital signage require.
Do the powered ports run at 2.5 Gbps?
Yes, all eight ports run at up to 2.5 Gbps and remain compatible with 100 Mbps and Gigabit. A recent Wi-Fi access point therefore gets both power and a link that does not hold it back, over a single cable.
What is the SFP+ slot on this switch for?
For the 10 Gbps uplink, to the network core or directly to network storage. Without it, eight 2.5 Gbps ports would quickly saturate a simple Gigabit link to the rest of the network.
Can this switch be configured?
No: it is plug-and-play, with no management interface. PoE++ activates on its own when a compatible device is detected: no management IP address, no VLAN to set up.
What power consumption should be expected for this switch?
Up to 120 W, once the 100 W of PoE++ is being delivered. The unit measures 240 × 105 × 27 mm and weighs 715 g: compact, but not to be enclosed without airflow, given the power it delivers.
Is the switch new and covered by a warranty?
Yes, new equipment, with the invoice serving as the warranty document. This is the ZyXEL XMG-108HP, a desktop multi-Gigabit PoE++ switch, not rack-mountable.
Grow a video surveillance network with no configuration at all: two uplinks avoid saturation towards the router. Fanless housing, Extend mode up to 250 m.
•Total PoE+ budget of 96 W, up to 30 W per port (802.3af/at)
•Plug-and-play operation, no configuration required
•Extend mode: data and PoE transmission up to 250 m
1 Gigabit SFP slot on top of PoE+, for a dedicated fibre link. 63 W PoE budget with automatic device recovery, and extend mode reaching up to 250 m for video surveillance.
Unmanaged Gigabit switch, ideal for a small practice or a home office: plug it in and use it straight away, with no configuration at all. Four of its five ports power IP cameras or Wi-Fi access points over PoE+.
Compact PoE+ access switch (802.3af/at standard) to power IP cameras, Wi-Fi access points or VoIP phones in small spaces. Gigabit/SFP combo uplink, managed through Ruijie Cloud.
Extend a SOHO or retail network with ease: power IP cameras, Wi-Fi access points and IP phones straight through the network cable, with no mains socket and no configuration.
Multiplies the network sockets in an office or a room, with no configuration at all: plug it in and it works. Compact, completely silent fanless housing.
Compact plastic casing, to sit on the desk or fix to the wall, fanless for completely silent operation. Green Ethernet technology: power draw adjusts automatically to the cable length and the state of the link.
Layer 2 managed switch for a small office powering a few Wi-Fi or IP devices over Power over Ethernet, with monitoring and scheduling via the Instant On mobile app.
•Layer 2 managed, configurable via the Instant On app and the web portal
Ready-to-use 2.5 Gbps Multi-Gigabit switch: it instantly speeds up an office or small-business network to make full use of Wi-Fi 6/6E access points and fast NAS units, with no configuration at all.
•2.5 Gbps Multi-Gigabit ports (100/1000/2500 Mbps), beyond standard Gigabit
