TP-Link EAP230-Wall WiFi 5 867 Mbps White Ethernet Connection, Power over Ethernet (PoE) (EAP230-WALL)
Flush-mounted on a standard junction box, it disappears into the wall without taking up space. 300 Mbps on 2.4 GHz complete the 5 GHz band, and its Gigabit port does not cap the throughput.
Up to 300 Mbps on the 2.4 GHz band
MU-MIMO to serve several devices at once
Gigabit Ethernet port (10/100/1000 Mbps)
Powered by PoE 802.3af: no mains socket needed
Mounts on a standard junction box
Housing of 86.8 × 86.8 × 30.2 mm
Up to 16 Wi-Fi networks (SSIDs)
VLAN segmentation and traffic prioritisation (QoS)
Access control lists and MAC address filtering
Typical draw of 7 W
Mounting kit included
Ref.: EAP230-WALL
Out of stock
1/3
1 129,00 DHincl. VAT
Out of stock
Product overview
Wall-plate Wi-Fi 5 access point TP-Link EAP230-Wall: put a discreet, flush-mounted dual-band access point in every room or office. Wi-Fi & speed:Wi-Fi 5 (802.11ac), dual-band — up to 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz. Capacity & performance:MU-MIMO to serve several devices at once, up to 16 SSIDs to segment your networks. Installation:indoor unit, wall mounting on a standard junction box. Ultra-compact design (86 × 86 × 30 mm) that blends into any interior. Ports & power:Gigabit (1 Gbps) Ethernet port; powered by PoE (802.3af) — no power socket needed nearby. Management: web interface, SNMP, access control lists (ACL), VLAN management and QoS to prioritise traffic. Use cases: hotel rooms, flats, private offices, practices, residences, shops or meeting rooms that want invisible, effective Wi-Fi. The ideal wall-plate format to equip every space with no visible cabling.
Beamforming, MU-MIMO, band steering; airtime fairness not supported
Maximum channel width
80 MHz on 5 GHz, 40 MHz on 2.4 GHz
Spatial streams and MU-MIMO
MU-MIMO; per-band MIMO configuration not published by the manufacturer
Maximum Wi-Fi throughput per band
300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz
Management modes
Web interface, SSH, SNMP v1/v2c, Omada app, Omada hardware or software controller
Cloud management platform
Omada SDN
Layer 2 features
VLAN, client isolation, MAC filtering (4,000 entries), access control, rate limiting per SSID or per client, guest network, WMM quality of service
Roaming and mesh
No mesh or seamless roaming
Power consumption
7 W maximum
Dimensions (W x D x H)
86.8 x 86.8 x 30.2 mm
Technical specifications (continued)
Antennas
2 internal antennas, gain 4 dBi at 2.4 GHz and 3.6 dBi at 5 GHz
Maximum transmit power
CE: < 20 dBm on 2.4 GHz, < 23 dBm on 5 GHz, EIRP
Security features
WPA and WPA2 Personal and Enterprise, 802.1X, captive portal, rogue AP detection
Power supply
PoE 802.3af or PoE+ 802.3at
Operating temperature
0 to 40 °C
Operating humidity
10 to 90% non-condensing
Wi-Fi standard
Wi-Fi 5
Location
Indoor
Mounting type
Wall mount
Bands
Dual-band
PoE power
PoE (802.3af)
Simultaneously connected devices
200+ clients
Warranty
1 year
Specific references
EAN
6935364089481
Customer reviews
No reviews yet
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
Does the EAP230-Wall mount on an existing flush-mounted wall box?
Yes, it fixes onto a standard junction box, in place of a wall socket, with the mounting kit supplied. Its square format of 86.8 × 86.8 mm and 30.2 mm thick makes it very discreet in a bedroom or an office.
What power supply do you need for the EAP230-Wall?
An 802.3af PoE port is enough: its typical consumption is only 7 W, far below the 15.4 W this type of port delivers. A single network cable therefore carries both power and data to the wall, with no power socket.
Is the EAP230-Wall's network port Gigabit?
Yes, it supports 10/100/1000 Mbps, over 10/100/1000Base-T cabling. With a theoretical radio throughput of 867 Mbps on the 5 GHz band, the port is therefore not the limiting factor of this access point.
Does the EAP230-Wall broadcast on the 6 GHz band?
No, it is dual-band: 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz, in Wi-Fi 5. The 6 GHz band belongs to Wi-Fi 6E, a more recent generation.
How many Wi-Fi networks can you create on the EAP230-Wall?
16 SSIDs, with VLAN segmentation, rate limiting and quality of service. A room or an office can thus have its own network, separate from the staff network.
What encryption does the EAP230-Wall support?
WPA2-PSK and WPA2-Enterprise, the latter authenticating each user against a server rather than with a shared key. MAC address filtering and access control lists round off the protection.
How does an administrator monitor the EAP230-Wall?
Through a web interface, SNMP versions 1 and 2, a system log and secure file transfer via SFTP over SSH v2 — useful for automating configuration backups or updates.
Are the EAP230-Wall's antennas visible?
No, its two antennas are internal, with a maximum gain of 3.6 dBi, fully housed in the white enclosure. A single status LED shows the state of the access point.
Does the EAP230-Wall choose its channel by itself?
Yes, it provides automatic channel selection and automatic frequency scanning: it identifies the least congested channels with no intervention — invaluable when several neighbouring wall-plate access points share a corridor.
Under what conditions does the EAP230-Wall operate?
Indoors, between 0 and 40 °C, at 10 to 90% humidity. Its low heat output — 7 W — lets it stay recessed in a wall box without troublesome overheating.
Is the equipment new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document for 1 year. The access point is CE and RoHS certified, and is managed from the Omada platform alongside the other devices in the range.
IP66 sealing when wall-mounted, IP65 on a pole and 6 kV lightning protection: the yard, the car park or the warehouse are covered. Up to 300 m of range on 5 GHz, and it works from -30 to +70 °C.
•IP66-sealed housing when wall-mounted, IP65 when pole-mounted
Powered over PoE+, it in turn powers a wired device through one of its four outgoing ports: a camera or an IP phone connects with no mains socket. Up to 2,400 Mbps on the 5 GHz band.
•1 incoming Gigabit port with PoE and 4 outgoing Gigabit ports, one of them PoE OUT
Built for busy venues: more than 200 devices served at the same time, up to 175 m of range and 1,300 Mbps available on the 5 GHz band. Fleet management is free, locally or in the cloud.
450 Mbps on the 2.4 GHz band and 867 on 5 GHz, for more than 220 devices at the same time. The free Omada software controller drives around a hundred access points from a single interface, and the power adapter is included.
Installed by a simple twist, without tools, on the ceiling. Up to 2,402 Mbps on the 5 GHz band and 110 devices served at the same time, with a single network cable that powers and connects it.
•Up to 2,402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz
Indoors as well as out: IP65 housing, operation from -30 to +65 °C and 4 kV lightning protection. Up to 2,401 Mbps on the 5 GHz band, 110 recommended clients and around 150 m² covered, wall or pole mounted.
Five Gigabit ports in a slim housing: one for the network feed, four for the TV, the PC or the phone in the room. Up to 2,400 Mbps on the 5 GHz band and 128 devices accepted.
•1 incoming Gigabit port with PoE and 4 outgoing Gigabit ports
Extra-slim 33.6 mm profile to disappear into the ceiling, with 2,402 Mbps on the 5 GHz band and a 160 MHz channel that doubles throughput at peak times.
Wall, ceiling or rail mounting, as you prefer. 1.775 Gbps combined, MU-MIMO and OFDMA to hold many users at once, and a single network cable that powers it and connects it.
•Combined throughput up to 1.775 Gbps on 2.4 and 5 GHz
•
Powered by PoE+ (802.3at)
•Up to 2,400 Mbps on 5 GHz and 575 Mbps on 2.4 GHz
In stock
1 139 DHincl. VAT1 139,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
802.11ac Wave-2 standard, i.e. Wi-Fi 5
•Up to 1,300 Mbps on 5 GHz and 450 Mbps on 2.4 GHz
Fits on a junction box to deliver fast Wi-Fi in every hotel room or office, with two network sockets for a TV, PC or IP phone, all powered over PoE and managed from Ruijie Cloud.
450 Mbps on the 2.4 GHz band and 867 on 5 GHz, for more than 220 devices at the same time. The free Omada software controller drives around a hundred access points from a single interface, and the power adapter is included.
Deployment claimed in 3 minutes from the Ruijie Cloud app, then remote monitoring and troubleshooting. Up to 867 Mbps on the 5 GHz band, with a single network cable that both powers and connects the access point.
Two Gigabit ports, one of them PoE: a single cable powers and connects it, while the second serves a wired device nearby. Up to 867 Mbps on the 5 GHz band and set-up claimed in 3 minutes.
•2 Gigabit Ethernet ports, one of them PoE-powered
Wall, ceiling or rail mounting, as you prefer. 1.775 Gbps combined, MU-MIMO and OFDMA to hold many users at once, and a single network cable that powers it and connects it.
•Combined throughput up to 1.775 Gbps on 2.4 and 5 GHz
•2x2 MIMO on each band
•MU-MIMO and OFDMA to serve several devices at the same time
75 devices served at once per radio and 1.2 Gbps of combined throughput, with Instant On management from an app or a browser. The network cable is enough to power it.
•Combined throughput up to 1.2 Gbps across both bands
More than 250 devices connected at the same time, with 1,201 Mbps available on the 5 GHz band. The network cable alone powers it and the whole set is managed from the Omada cloud.
•Up to 1,201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz
•More than 250 devices connected simultaneously
•OFDMA and MU-MIMO to serve several devices at once
Just 11 mm thick: it mounts on a standard junction box and goes unnoticed in a bedroom or an office. It takes more than 100 devices and is managed remotely with Omada.
Built for busy venues: more than 200 devices served at the same time, up to 175 m of range and 1,300 Mbps available on the 5 GHz band. Fleet management is free, locally or in the cloud.
•802.11ac Wave-2 standard, i.e. Wi-Fi 5
•Up to 1,300 Mbps on 5 GHz and 450 Mbps on 2.4 GHz
Five Gigabit ports in a slim housing: one for the network feed, four for the TV, the PC or the phone in the room. Up to 2,400 Mbps on the 5 GHz band and 128 devices accepted.
•1 incoming Gigabit port with PoE and 4 outgoing Gigabit ports
•Up to 2,400 Mbps on 5 GHz and 575 Mbps on 2.4 GHz
