Skip to main content

Welcome to the new iris.ma

We rebuilt everything for you

Same team, same standards

Pay nowView my order
Visit the TP-Link store

TP-Link TL-SX1008 Unmanaged 10G Ethernet Network Switch (100/1000/10000) 1U Black (TL-SX1008)

Switch for connecting servers, NAS units and demanding workstations at very high speed, with a generous switching capacity that absorbs the heavy traffic of a network rack effortlessly.

  • 8 RJ45 ports, backward compatible with 100/1000 Mbps
  • Switching capacity 160 Gbps
  • Forwarding rate 119 Mpps
  • MAC address table of 32,000 entries
  • 16 MB buffer memory
Ref.: TL-SX1008
5 659,00 DHincl. VAT

Out of stock

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Can’t wait?

Ask for an alternative on WhatsApp

Quick reply

Product overview

TP-Link TL-SX1008 unmanaged switch: 8 RJ45 10G Ethernet ports (100/1000/10000 Mbps) to connect servers, NAS units and workstations at very high speed — the most straightforward plug-and-play way to build a 10G network in a network rack, with no configuration at all.
Ports: 8 RJ45 10 Gbps ports, backward compatible with 100/1000 Mbps. 1U rackmount format for installation in a standard 19-inch network rack.
Performance: 160 Gbps switching capacity, 119 Mpps forwarding rate, 16 MB packet buffer, 32,000-entry MAC address table — no bottleneck for heavy server and storage traffic.
Also: 10,000-byte Jumbo frames, auto-negotiation, 1 built-in fan, CE/FCC/RoHS certified. No PoE.

See all the specifications ↓
Request a quoteShare:

Technical specifications

Technical specifications
MAC table size32,000 entries
Number of VLANsNone
Interfaces8 RJ45 100/1000/2500/5000/10000 Mbps ports, auto-negotiation, Auto MDI/MDIX
PoE portsNone
Total PoE budgetNone
Network standardsIEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1p, 802.3an, 802.3bz
Switching capacity160 Gbps
Forwarding rate119 Mpps
Packet buffer2 Mbit
Management modesNone (plug-and-play)
Cloud management platformNone
Layer 2 features802.3x flow control, 802.1p/DSCP QoS, 10 KB jumbo frames, store-and-forward switching
IP routingNone
Quality of service (QoS)802.1p/DSCP
Power consumption31.2 W maximum
Technical specifications (continued)
Dimensions (W x D x H)294 x 180 x 44 mm
Package contents8-port 10G multi-gigabit desktop or rack-mount switch TL-SX1008, power cord, setup guide, rack mounting kit, rubber feet
Number of ports6 to 10 ports
ManagedNo
Housing materialMetal
Security featuresNone
Power supplyInternal power supply 100-240 V AC, 50/60 Hz, 0.8 A
Cooling system1 variable-speed fan
Operating temperature0 to 50 °C
PoE powerNo
Port speed10 Gbps (10G)
Fibre slots (SFP)No
Mounting19-inch rack-mountable
Warranty1 year

Specific references

EAN6935364030919

Customer reviews

No reviews yet

Be the first to review this product and help other customers.

Write a review
Your rating
5/5

Shown publicly with your review.

Never published — a confirmation email will be sent to you.

Tell us about the product — in a few lines:

  • what you liked in everyday use;
  • the quality and performance you found;
  • who you would recommend it to, and why.

A question about an order, a delivery or a payment? Write to us and we will reply to you directly.

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Frequently asked questions about this product

Are all 8 ports on the TL-SX1008 10 Gbps?
Yes, all eight RJ45 ports reach 10 Gbps, and automatically drop back to 100 or 1,000 Mbps depending on the connected device. The 802.3an and 802.3bz standards are supported: the intermediate 2.5 and 5 Gbps speeds also work.
Can this 10G switch be configured?
No: it is unmanaged, with no VLANs, no link aggregation and no web interface. It is a raw-throughput switch, to be placed between servers, network storage and editing workstations, where configuration adds nothing.
What internal performance does the TL-SX1008 offer?
160 Gbps switching capacity and 119 Mpps: enough to run all eight ports at 10 Gbps in both directions without a bottleneck. The MAC address table holds up to 32,000 entries and the buffer memory reaches 16 MB.
Does the switch support jumbo frames?
Yes, up to 10,000 bytes. On 10 Gbps links to network storage or a backup server, these large frames reduce the processor load at both ends and improve real-world throughput.
Is the TL-SX1008 noisy?
It has a built-in fan. On a 10 Gbps switch that draws up to 28.4 W, this active cooling is what lets it operate from 0 to 50 °C. Install it in a rack or a technical room rather than on a desk.
Does this switch need an external power adapter?
No: it plugs straight into the mains, at 100-240 V and 50-60 Hz, with the cord supplied. A single power cable to run through the rack, with no bulky transformer.
How much rack space does the TL-SX1008 take up?
1U high, at 294 × 180 × 44 mm, rack-mount kit included. It therefore does not span the full width of a 19-inch rack, but the supplied kit secures it to the rails with no extra accessories.
Does this switch provide PoE?
No, none of its ports supplies power. The 10 Gbps devices it serves — servers, storage units, workstations — have their own power supply anyway.
Is the switch new and covered by a warranty?
Yes, new equipment, with the invoice serving as the warranty document. The TL-SX1008 comes with the power cord, the rack-mount kit and the quick start guide, and carries CE, FCC and RoHS certification.

Trending

View the TP-Link archive

Chat on WhatsApp

Scan with my phone

The simplest way: open your phone camera and point it at this code. The chat opens with your message ready.

Open WhatsApp Web

Works if your phone is already linked to this computer.

Prefer to call? (+212) 05 30 31 64 21