Cisco Catalyst 2960-24-S Managed Switch - 24 Ports 10/100Mbps + LAN Lite
Switching capacity of 16 Gbps for a 3.6 Mpps throughput. 8000-entry MAC address table, up to 255 VLANs, with SSH2, RADIUS and TACACS+ authentication to secure administration.
Switching capacity 16 Gbps
Throughput 3.6 Mpps
Layer 2 (L2) switching
8000-entry MAC address table
Up to 255 VLANs
SSH2, RADIUS and TACACS+ authentication
SSL security
IGMP snooping
Rapid and Multiple Spanning Tree (RSTP/MSTP)
Weight 3.6 kg
Ref.: WS-C2960-24-S
Out of stock
465,00 DHincl. VAT
Out of stock
Product overview
Cisco Catalyst 2960-24-S managed switch - Switching capacity: 16 Gbit/s - Forwarding rate (Mpps): 3.6 Mpps - 24 × 10/100 ports - Number of VLANs: 255 - Internal memory: 64 MB - Flash memory: 32 MB - Layer 2 switching, auto-detection, DHCP, auto-negotiation, virtual LAN, auto MDI/MDI-X - Software included: LAN Lite Image - 3.6 kg
Web interface (HTTP and HTTPS), CLI via Telnet and SSH v2, SNMP v1, v2, v2c and v3, DHCP and BOOTP client, ARP, IPv6 support, RMON 1 and 2, TFTP, syslog
Cloud management platform
None
Layer 2 features
Layer 2 switching, 802.1Q VLAN, 802.3ad link aggregation, rapid (RSTP) and multiple (MSTP) spanning tree, IGMP snooping, auto MDI/MDI-X, broadcast, multicast and unicast storm control, DTP negotiation
IP routing
None
Quality of service (QoS)
DiffServ classification
Technical specifications (continued)
Power consumption
22 W
Included software
Cisco IOS LAN Lite
Weight
3.6 kg
Dimensions (W x D x H)
445 x 236 x 44 mm
Number of ports
19 to 28 ports
Managed
Yes
Security features
802.1X authentication, RADIUS and TACACS+, SSH v2 and SSL access, broadcast, multicast and unicast storm control
Power supply
Internal 100-240 V AC power supply
PoE power
No
Port speed
100 Mbps (Fast Ethernet)
Management level
Layer 2
Fibre slots (SFP)
No
Mounting
19-inch rack-mountable
Warranty
1 year
Customer reviews
No reviews yet
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
Are the ports on the Catalyst 2960-24-S Gigabit?
No: all 24 ports are 10/100 Mbps, with no Gigabit port and no fibre slot. It is an access switch for computers, printers and terminals; the uplink therefore shares the same speed as the user outlets.
How many VLANs does this switch support?
Up to 255 VLANs, with the DTP protocol to negotiate links between switches automatically. Rapid spanning tree (RSTP) and multiple spanning tree (MSTP) secure redundant topologies.
What performance does this Catalyst offer?
16 Gbps of switching capacity and 3.6 Mpps on 64-byte packets, with an 8,000-entry MAC address table. It has 64 MB of internal memory and 32 MB of flash memory.
Does the switch protect the network from traffic storms?
Yes, for all three types: broadcast, multicast and unicast. A faulty network card or a temporary loop therefore does not flood every outlet, and IGMP snooping also limits the spread of multicast streams.
How is management access secured?
Through SSH version 2, with RADIUS or TACACS+ authentication, and web access over SSL and HTTPS. Monitoring is handled by SNMP v1, v2c and v3, RMON and Syslog logging.
Does this switch power devices over PoE?
No, none of its ports supplies power. IP cameras, Wi-Fi access points and phones connected to this switch need their own power supply or a PoE injector. Its own power consumption, incidentally, is only 22 W.
How much rack space does this switch take up?
445 × 236 × 44 mm and 3.6 kg: 1U high, 23.6 cm deep, 19-inch rack mounting. It fits in a deep wall-mount cabinet as well as in a standard rack.
Is the switch new and covered by a warranty?
Yes, new equipment, with the invoice serving as the warranty document. It comes with the LAN Lite software image, the entry-level version of the Cisco operating system, which covers Layer 2 switching.
Compact PoE+ access switch (802.3af/at standard) to power IP cameras, Wi-Fi access points or VoIP phones in small spaces. Gigabit/SFP combo uplink, managed through Ruijie Cloud.
•6 Gigabit ports (10/100/1000 Mbps), 4 of them PoE+ (802.3af/at standard)
•1 Gigabit/SFP combo port for the uplink (fibre or copper)
Desktop switch in a sturdy metal casing, with a web interface to prioritise traffic and create VLANs — a sound balance between simplicity and control for a small network.
Rack-mountable Easy Smart switch, the middle ground for an SME that wants VLANs and QoS without the complexity of a fully managed switch, through a simple web interface.
Rack-mountable Easy Smart switch for an SME that wants to segment and secure its network with VLANs and QoS, without the complexity of a fully managed switch — configurable from a simple web interface.
•802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)
For SMEs, hotels or schools: two uplink speeds to choose from, 2.5G or 10G fibre, to interconnect your access switches. Completely silent 1U casing, fanless.
Each PoE+ port delivers up to 30 W, for a total budget of 120 W, rounded out by two fibre links. Managed from the GWN.Cloud platform or locally, with VLANs and advanced security.
•8 PoE+ ports (802.3af/at), total budget 120 W, up to 30 W per port
Designed for harsh environments: an IP40 aluminium housing operating from -40 °C to +75 °C, fanless. ERPS ring redundancy and remote management through Ruijie Cloud.
•1 PoE++ port up to 90 W + 3 PoE+ ports at 30 W each
For SMEs, hotels, schools or industrial sites: 4 fibre links beyond standard Gigabit to connect your aggregation switches. Completely silent 1U casing, managed locally or from the cloud.
Designed for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote port restart through Ruijie Cloud. Extension up to 250 m in camera mode.
Fully managed and silent switch (fanless), with two 10 Gbps uplinks and two at 2.5 Gbps for a capable SME network core. Management through the HUAWEI eKit App, web interface or SNC.
•24 Gigabit RJ45 ports (10/100/1000)
•2 SFP+ 10 Gbps ports for uplinks
•Web interface and management utility to prioritise traffic and create VLANs
•802.1Q, port-based and MTU VLANs (up to 32 simultaneous VLANs)
•802.1p/DSCP QoS, IGMP Snooping
In stock
879 DHincl. VAT879,00 DHincl. VAT919 DH919,00 DH
Delivery everywhereDelivered all over Morocco
802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)
•Per-port QoS and 802.1p/DSCP to prioritise voice and video
•IGMP Snooping, static link aggregation (up to 8 groups)
For SMEs, hotels or schools: two uplink speeds to choose from, 2.5G or 10G fibre, to interconnect your access switches. Completely silent 1U casing, fanless.
Compact rack-mountable format, completely silent and fanless, suited to open-plan offices and conference rooms — simplified control from the Aruba Instant On app, with no subscription.
Rack-mountable Easy Smart switch for an SME that wants to segment and secure its network with VLANs and QoS, without the complexity of a fully managed switch — configurable from a simple web interface.
•802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)
•Per-port QoS and 802.1p/DSCP to prioritise voice and video
•IGMP Snooping, static link aggregation (up to 8 groups)
For SMEs, hotels, schools or industrial sites: 4 fibre links beyond standard Gigabit to connect your aggregation switches. Completely silent 1U casing, managed locally or from the cloud.
Fully managed and silent switch (fanless), with two 10 Gbps uplinks and two at 2.5 Gbps for a capable SME network core. Management through the HUAWEI eKit App, web interface or SNC.
Rack-mountable Easy Smart switch, the middle ground for an SME that wants VLANs and QoS without the complexity of a fully managed switch, through a simple web interface.
•802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)
•Per-port QoS and 802.1p/DSCP to prioritise voice and video
•IGMP Snooping, static link aggregation (up to 8 groups)
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
Layer 3 managed enterprise switch (static routing and RIP) that powers all its ports over the network cable, for cameras and Wi-Fi access points. Switching capacity 128 Gbps, upgradable to 10 Gbps fibre.
