Skip to main content

Welcome to the new iris.ma

We rebuilt everything for you

Same team, same standards

Pay nowView my order
Visit the TP-Link store

TP-Link AC1200 Mesh WiFi 5 Outdoor Access Point MU-MIMO Gigabit (IP65) (EAP225-OUTDOOR)

Outdoors in all weathers: 4 kV lightning protection, detachable antennas and wall or pole mounting kits included. Up to 867 Mbps on the 5 GHz band, more than 220 simultaneous devices, and the PoE adapter comes with it.

  • Up to 867 Mbps on the 5 GHz band
  • 300 Mbps on the 2.4 GHz band
  • More than 220 devices connected simultaneously
  • 4 kV lightning protection and 15 kV electrostatic discharge protection
  • 802.3af PoE or 24 V passive PoE power, adapter included
  • 2 detachable dual-band omnidirectional antennas
  • Wall and pole mounting kits included
  • Driven by the Omada platform: cloud, controller or mobile app
  • Seamless 802.11k/v roaming between access points
  • Captive portal with SMS or Facebook authentication
  • Up to 16 Wi-Fi networks, 8 per band
  • VLAN assignment per Wi-Fi network
Ref.: EAP225-OUTDOOR
1 329,00 DHincl. VAT

Out of stock

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Can’t wait?

Ask for an alternative on WhatsApp

Quick reply

Manufacturer's datasheetView the PDF · 17,1 Mo — downloadable

Product overview

TP-Link EAP225-OUTDOOR IP65 outdoor Wi-Fi 5 access point: cover your outdoor spaces in all weathers.
Wi-Fi & speed: Wi-Fi 5 AC1200 dual-band — up to 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz).
Capacity: MU-MIMO 2×2, Beamforming, Band Steering — 220+ devices at once.
Installation: IP65 enclosure (waterproof and dustproof), 4 kV lightning protection — pole or wall mounting (kits included).
Ports & power: Gigabit port; PoE 802.3af or 24 V passive PoE (adapter included) — a single cable is all it takes.
Management: Omada SDN platform (cloud, controller, app) — automatic mesh, 802.11k/v seamless roaming, captive portal, VLAN, WPA2.
Use cases: café terraces, gardens, car parks, school playgrounds, building sites, warehouses, outdoor extension for hotels or shops.
Ruggedised enclosure, PoE and Omada mesh: outdoor Wi-Fi without compromise.

See all the specifications ↓
Request a quoteShare:

Technical specifications

Technical specifications
Package contentsEAP225-Outdoor access point, passive PoE adapter, power cord, mounting kits, setup guide, waterproof seal and waterproof antenna
IP protection ratingIP65
Number of SSIDs16 SSIDs in total, 8 per band
Interfaces1 Gigabit Ethernet port (RJ45) compatible with 802.3af PoE and passive PoE, 1 reset button
Network standardsIEEE 802.11a/b/g/n/ac
Advanced Wi-Fi technologiesBeamforming, MU-MIMO, band steering, airtime fairness
Maximum channel width80 MHz on 5 GHz, 40 MHz on 2.4 GHz
Spatial streams and MU-MIMO2 spatial streams at 5 GHz (NSS 1 to 2), MU-MIMO
Maximum Wi-Fi throughput per band300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz
Management modesWeb interface, SSH, SNMP v1/v2c, Omada app, Omada hardware (OC200, OC300), software or cloud controller
Cloud management platformOmada SDN
Layer 2 featuresSSID-to-VLAN mapping, client isolation, MAC filtering, access control, rate limiting, load balancing
Roaming and meshOmada Mesh and seamless roaming
Power consumption10.5 W maximum
Technical specifications (continued)
Dimensions (W x D x H)215.7 x 45 x 37.7 mm without antenna or mounting kit; 403.8 x 90.7 x 55.2 mm with
Antennas2 detachable external dual-band omnidirectional antennas, gain 3 dBi at 2.4 GHz and 4 dBi at 5 GHz
Maximum transmit powerCE: < 20 dBm on 2.4 GHz, < 27 dBm on 5 GHz, EIRP; FCC: < 23 dBm on 2.4 GHz, < 22 dBm on 5 GHz
Security featuresWPA and WPA2 Personal and Enterprise, 802.1X, captive portal, rogue AP detection
Power supplyPoE 802.3af or 24 V passive PoE (+4.5; -7.8), PoE adapter included
Operating temperature-30 to 70 °C
Operating humidity10 to 90% non-condensing
Wi-Fi standardWi-Fi 5
LocationOutdoor
Mounting typeMultiple
BandsDual-band
PoE powerPoE (802.3af)
Simultaneously connected devices220+ clients
Warranty2 years

Specific references

EAN6935364083571

Customer reviews

No reviews yet

Be the first to review this product and help other customers.

Write a review
Your rating
5/5

Shown publicly with your review.

Never published — a confirmation email will be sent to you.

Tell us about the product — in a few lines:

  • what you liked in everyday use;
  • the quality and performance you found;
  • who you would recommend it to, and why.

A question about an order, a delivery or a payment? Write to us and we will reply to you directly.

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Frequently asked questions about this product

What is in the box of the EAP225-Outdoor?
The access point, a 24 V passive PoE adapter with its power cord, the mounting kits, a weatherproof seal and a weatherproof antenna, plus the installation guide. It can therefore be installed without a PoE switch if needed.
Are the antennas of the EAP225-Outdoor replaceable?
Yes, its two dual-band omnidirectional antennas are detachable — 3 dBi on 2.4 GHz and 4 dBi on 5 GHz. That is what lets you replace them with a directional model to focus the signal on a specific path or terrace.
What weather protection does the EAP225-Outdoor offer?
An IP65 enclosure — dust-tight and protected against water jets — and an operating range of -30 to +70 °C. The 4 kV lightning protection and 15 kV electrostatic discharge protection require proper grounding and cable shielding during installation.
What power supply do you need for the EAP225-Outdoor?
An 802.3af PoE port or the included 24 V passive PoE adapter. Power consumption stays at 10.5 W, well below the 15.4 W of an 802.3af port: an entry-level PoE switch is enough.
How much space does the EAP225-Outdoor take up once installed?
215.7 × 45 × 37.7 mm for the enclosure alone, and 403.8 × 90.7 × 55.2 mm once the antennas and mounting kit are fitted. It is this second measurement you need to go by when choosing the spot on a pole or a façade.
How many devices does the EAP225-Outdoor serve at the same time?
More than 220 devices, with 867 Mbps on the 5 GHz band and 300 Mbps on 2.4 GHz. MU-MIMO and beamforming serve several devices in parallel rather than one after the other.
How is the EAP225-Outdoor mounted?
On a wall or a pole, with both kits supplied along with the weatherproofing parts. The access point connects through a single Gigabit port that carries both power and data.
How many Wi-Fi networks can you broadcast outdoors with this access point?
16 SSIDs, eight per band, with a VLAN per SSID, a rate cap and client isolation. Enough to open public access on a terrace without exposing the internal network.
How do you identify guests on an outdoor hotspot?
Through the captive portal, with authentication by SMS or by Facebook account: this avoids handing out a password and gives an identifiable contact for each connection, which matters in a space open to the public.
Does the EAP225-Outdoor flag a rogue access point nearby?
Yes, rogue access point detection spots unauthorised access points transmitting within range. On top of that come MAC address filtering, access control and 802.1X support to authenticate each user against a server.
Can you schedule the outdoor Wi-Fi to switch off at night?
Yes, time schedules switch the Wi-Fi on or off, and an automatic reboot can be scheduled for off-peak hours. On a terrace that is closed at night, that means fewer unwanted connections.
How do you manage several EAP225-Outdoor units remotely?
Through the Omada platform: software controller, hardware controller, cloud controller or mobile app. 802.11k and 802.11v seamless roaming then moves devices from one access point to another without interruption.
Is the equipment new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document for 1 year. The access point fits into the Omada ecosystem alongside the range's switches and gateways, all managed from the same interface.

Trending

View the TP-Link archive

Chat on WhatsApp

Scan with my phone

The simplest way: open your phone camera and point it at this code. The chat opens with your message ready.

Open WhatsApp Web

Works if your phone is already linked to this computer.

Prefer to call? (+212) 05 30 31 64 21