48-port Gigabit managed switch + 4 fibre SFP, driven from a simple web browser: VLAN, link aggregation, DHCP. Switching capacity 104 Gbps for a dense network.
Secure web interface (HTTPS), SNMP v1 and v2c, LLDP 802.1AB, port mirroring
Cloud management platform
None
Layer 2 features
802.1Q VLAN (64 VLANs per port), LACP link aggregation (16 groups of 8 links), jumbo frames up to 9,220 bytes, port mirroring, storm protection, auto MDI/MDI-X, DHCP client and server
IP routing
None
Quality of service (QoS)
802.1p prioritisation (8 levels to 4 queues), broadcast control
SSL on the web interface, automatic denial-of-service protection, administrator password, Kensington security slot
Power supply
Internal 100-127 V AC / 200-240 V AC power supply
Cooling system
1 fan
PoE power
No
Port speed
1 Gbps (Gigabit)
Management level
Layer 2
Fibre slots (SFP)
Yes
Mounting
19-inch rack-mountable
Warranty
1 year
Customer reviews
No reviews yet
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How is this 48-port switch managed?
From a web browser: VLANs, link aggregation and traffic prioritisation are configured without a command line. The switch also has a built-in DHCP client and server, so it can hand out addresses without any additional equipment.
What latency does this switch offer?
Less than 3.2 µs at Gigabit and less than 8.4 µs at 100 Mbps, on 64-byte packets. Switching capacity reaches 104 Gbps at 77.4 Mpps, with a 16,000-entry MAC address table.
What are the 4 SFP slots on this model for?
For a fibre uplink, at 100 or 1,000 Mbps with auto-detection. With 48 access ports, it is wise to aggregate several of them to avoid a bottleneck towards the network core.
Which duplex modes do the ports on this switch support?
Gigabit runs in full duplex only; 10 and 100 Mbps support both half and full duplex. This is what the standard requires, and worth knowing when an older device forces a particular mode.
What protections does this switch provide?
Broadcast storm control, flow control and link aggregation, with support for jumbo frames. Power consumption stays limited to 60 W for 48 Gigabit ports.
How much rack space does this switch take up?
442 × 249 × 46 mm and 2.86 kg: 1U high and 25 cm deep, which fits in a deep wall-mount cabinet. It is designed for 19-inch rack mounting.
Is the switch new and covered by a warranty?
Yes, new equipment, with the invoice serving as the warranty document. This is the HP 1810-48G, part number J9660A, a web-managed switch with 64 MB of internal memory.
The TP-Link ES206GP combines 6 Gigabit ports, 4 of them PoE+: enough to power cameras and Wi-Fi access points without a dedicated power socket, with centralised Omada monitoring.
Compact PoE+ access switch (802.3af/at standard) to power IP cameras, Wi-Fi access points or VoIP phones in small spaces. Gigabit/SFP combo uplink, managed through Ruijie Cloud.
Desktop switch in a sturdy metal casing, with a web interface to prioritise traffic and create VLANs — a sound balance between simplicity and control for a small network.
Rack-mountable Easy Smart switch, the middle ground for an SME that wants VLANs and QoS without the complexity of a fully managed switch, through a simple web interface.
The TP-Link ES224G packs 24 Gigabit ports with simplified Omada management: a network core that can keep pace as an office or small business site grows.
Rack-mountable Easy Smart switch for an SME that wants to segment and secure its network with VLANs and QoS, without the complexity of a fully managed switch — configurable from a simple web interface.
•802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)
•Per-port QoS and 802.1p/DSCP to prioritise voice and video
Compact layer 2 access switch for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote management through Ruijie Cloud. Silent, fanless operation.
For SMEs, hotels or schools: two uplink speeds to choose from, 2.5G or 10G fibre, to interconnect your access switches. Completely silent 1U casing, fanless.
Each PoE+ port delivers up to 30 W, for a total budget of 120 W, rounded out by two fibre links. Managed from the GWN.Cloud platform or locally, with VLANs and advanced security.
•8 PoE+ ports (802.3af/at), total budget 120 W, up to 30 W per port
For SMEs, hotels, schools or industrial sites: 4 fibre links beyond standard Gigabit to connect your aggregation switches. Completely silent 1U casing, managed locally or from the cloud.
•24 Gigabit ports (10/100/1000BASE-T)
•4 SFP 2.5 Gbps fibre ports for uplink
6 Gigabit ports (10/100/1000 Mbps), 4 of them PoE+ (802.3af/at standard)
•1 Gigabit/SFP combo port for the uplink (fibre or copper)
•Automatic IP camera detection
In stock
665 DHincl. VAT665,00 DHincl. VAT695 DH695,00 DH
Delivery everywhereDelivered all over Morocco
•Web interface and management utility to prioritise traffic and create VLANs
•802.1Q, port-based and MTU VLANs (up to 32 simultaneous VLANs)
•802.1p/DSCP QoS, IGMP Snooping
In stock
859 DHincl. VAT859,00 DHincl. VAT899 DH899,00 DH
Delivery everywhereDelivered all over Morocco
802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)
•Per-port QoS and 802.1p/DSCP to prioritise voice and video
•IGMP Snooping, static link aggregation (up to 8 groups)
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
Delivery everywhereDelivered all over Morocco
Delivery everywhereDelivered all over Morocco
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
Compact rack-mountable format, completely silent and fanless, suited to open-plan offices and conference rooms — simplified control from the Aruba Instant On app, with no subscription.
48 Gigabit ports, half of them PoE+ (ports 1 to 24), for mixed SME or campus deployments — simplified control from the Aruba Instant On app, with no subscription.
•24 of the 48 ports in PoE+ (802.3at), ports 1 to 24
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
A Layer 3 switch built for wired access on a floor or across a building: integrated OSPF/RIP routing, VSF virtual stacking up to 8 units and central control from Aruba Central.
High-density PoE+ access switch (802.3af/at standard) for IP cameras, Wi-Fi access points and VoIP phones. 176 Gbps switching capacity, L2+ functions and lifetime cloud management through Ruijie Cloud.
•48 Gigabit PoE+ ports (802.3af/at standard)
•4 SFP+ 10 Gbps ports (uplinks)
•L2+ functions: VLAN, STP/RSTP/MSTP, link aggregation (LACP)
For SMEs, hotels or schools: two uplink speeds to choose from, 2.5G or 10G fibre, to interconnect your access switches. Completely silent 1U casing, fanless.
Layer 2 Gigabit switch for SMEs, with PoE+ ports to power cameras and Wi-Fi access points, plus SFP fibre links. Silent rackable format, driven through UniFi Network.