The ideal companion for Wi-Fi 6/6E access points: 2.5G speed over your existing cabling and PoE++ to power them with no electrician. Ultra-compact housing, completely silent.
PoE++ (802.3bt), 60 W per port, 130 W budget in actual consumption mode
2.5G speed over existing Cat 5e cable, with no rewiring
Compatible with Wi-Fi 6/6E access points and PTZ cameras
Compact Multi-Gigabit switch Zyxel XMG1915-10EP: 8 × 2.5G PoE++ ports and 2 × 10G SFP+ uplinks to connect Wi-Fi 6/6E access points at full speed and power cameras and IP phones in a quiet office. Multi-Gig PoE++: the 8 × 2.5G RJ-45 ports (100M/1G/2.5G) each deliver up to 60 W (IEEE 802.3bt) — enough for Wi-Fi 6E access points and PTZ cameras. 130 W PoE budget in actual-consumption mode. 2.5G speed runs over existing Cat 5e cabling. Uplinks:2 × 10G SFP+ slots for a fibre or DAC link to an upstream switch. Management: smart managed; VLAN, QoS, IGMP snooping, LACP; local web interface or Nebula cloud (NebulaFlex). Form factor: ultra-compact desktop enclosure (250 × 104 × 27 mm), fanless — completely silent operation. Key specs: 80 Gbit/s switching capacity, 59.5 Mpps forwarding rate, 16K MAC table, 12K jumbo frames.
Static and inter-VLAN routing, 8 routes, 8 IP interfaces, table of 128 IPv4 and 128 IPv6 entries
Quality of service (QoS)
8 hardware queues per port, 802.1p SPQ/WRR scheduling, storm control, ingress and egress per-port rate limiting
Power consumption
163 W maximum with PoE, 33 W without PoE, 11.7 W idle
Technical specifications (continued)
Weight
0.78 kg
Dimensions (W x D x H)
250 x 104 x 27 mm
Package contents
Power cord, AC adapter, wall-mount kit
Number of ports
6 to 10 ports
Managed
Yes
Security features
Layer 2 MAC filtering, static MAC, SSH v2, SSL, SHA-2 HTTPS certificate, port security, MAC freeze, CPU protection, RADIUS authentication and authorisation
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How much power does the Zyxel XMG1915-10EP deliver per port?
Up to 60 W per port in PoE++ 802.3bt, on its eight 2.5G ports, with a 130 W budget in actual-consumption mode. That is what Wi-Fi 6E access points and motorised cameras demand.
What does a PoE budget “in actual-consumption mode” mean?
The switch reserves only the power actually requested by each device, instead of locking in the theoretical maximum per port. You can therefore power more devices with the same 130 W budget.
Does taking advantage of 2.5 Gbps require recabling?
No: 2.5 Gbps works over existing Cat 5e cabling. A Wi-Fi 6 or 6E access point is therefore no longer held back by a Gigabit port, without a single cable being replaced in the walls.
What are the two SFP+ slots used for?
For the 10 Gbps uplink, over fibre or DAC cable, to the upstream switch. Without it, eight ports at 2.5 Gbps would end up sharing a much narrower uplink.
Does this PoE++ switch make any noise?
No: the desktop enclosure has no fan, so it is completely silent, and measures 250 × 104 × 27 mm. That is rare for a switch delivering 60 W per port: it can stay in an occupied office.
What can be configured on this switch?
VLANs, quality of service, IGMP snooping and LACP aggregation, from the local web interface or from the Nebula cloud. Both modes coexist thanks to NebulaFlex, without changing hardware.
What performance does this switch offer?
80 Gbps of switching capacity and 59.5 Mpps, with a 16,000-entry MAC address table and jumbo frames up to 12 KB — useful for transfers to network storage.
Is the switch new and covered by a warranty?
Yes, new equipment, with the invoice serving as the warranty document. Full technical details are in the XMG1915-10EP datasheet.
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•22 Gigabit PoE+ RJ45 ports and 2 combo ports at 2.5 Gbps PoE+ (copper or fibre)
Managed switch that keeps your PoE equipment powered even during a restart (perpetual PoE), for continuity of service on critical cameras or Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
Layer 2 Gigabit switch for SMEs, with PoE+ ports to power cameras and Wi-Fi access points, plus SFP fibre links. Silent rackable format, driven through UniFi Network.
•24 Gigabit RJ45 ports, 16 of them PoE+ (802.3at)
•2 SFP 1 Gbps ports (fibre links)
•
12 of the 24 ports in PoE+ (802.3at), ports 1 to 12
•Up to 30 W per port — access points, IP phones, cameras
Compact layer 2 access switch for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote management through Ruijie Cloud. Silent, fanless operation.
•PoE+ (802.3af/at standard)
•RJ45/SFP combo port for a fibre or copper uplink
•Managed through Ruijie Cloud, a mobile app or a web interface
Very fast, fully managed enterprise network: Multi-Gigabit 2.5 Gbps ports with PoE++ up to 60 W to power the most demanding Wi-Fi 6E access points and PTZ cameras. Full L3 routing.
Compact PoE+ access switch (802.3af/at standard) to power IP cameras, Wi-Fi access points or VoIP phones in small spaces. Gigabit/SFP combo uplink, managed through Ruijie Cloud.
Managed switch that keeps your PoE equipment powered even during a restart (perpetual PoE), for continuity of service on critical cameras or Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
Each PoE+ port delivers up to 30 W, for a total budget of 120 W, rounded out by two fibre links. Managed from the GWN.Cloud platform or locally, with VLANs and advanced security.
•8 PoE+ ports (802.3af/at), total budget 120 W, up to 30 W per port
The TP-Link ES206GP combines 6 Gigabit ports, 4 of them PoE+: enough to power cameras and Wi-Fi access points without a dedicated power socket, with centralised Omada monitoring.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
Designed for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote port restart through Ruijie Cloud. Extension up to 250 m in camera mode.
Layer 2 Gigabit switch for SMEs, with PoE+ ports to power cameras and Wi-Fi access points, plus SFP fibre links. Silent rackable format, driven through UniFi Network.
