Gets the network ready for tomorrow's speeds: demanding workstations and recent Wi-Fi access points powered with no bottleneck, a 160 W PoE+ budget and built-in L3 static routing. Fanless design, completely silent.
Total PoE+ budget of 160 W, up to 30 W per port
L3 static routing: 32 IP interfaces, 32 IPv4/IPv6 routes
TP-Link SG2210XMP-M2 2.5G multi-gigabit Omada Smart switch: get your network ready for tomorrow's speeds. Ports:8 × 2.5GBASE-T PoE+ ports + 2 × 10GE SFP+ ports to eliminate bottlenecks towards the network core. PoE: powers Wi-Fi 6/7 access points and fast workstations without a separate power adapter. Comfort:fanless design, completely silent. Management:Omada SDN, VLAN, QoS, ACL, cloud or on-premises. Use cases: modern offices, high-density Wi-Fi, demanding workstations. A scalable 2.5G PoE+ Smart switch, the ideal foundation for a high-performance network.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
What do the 2.5 Gbps ports on the SG2210XMP-M2 bring?
The eight RJ45 ports negotiate up to 2.5 Gbps while supplying PoE+: a Wi-Fi 6 or 7 access point is no longer held back by its wired link, and a demanding workstation goes beyond the Gigabit ceiling over a simple copper cable.
What PoE budget does this switch offer?
160 W in total, with up to 30 W per port under the 802.3af and 802.3at standards on all eight ports. Five Wi-Fi access points at 30 W already use most of the budget: add up the actual consumption before cabling.
Do cameras stay powered while the switch restarts?
Yes: the Fast PoE and Perpetual PoE features keep cameras, access points and IP phones powered even while the switch reboots. No device goes down during an update.
Can this switch route between VLANs?
Yes, with Layer 3 static routing: 32 IP interfaces and 32 IPv4 or IPv6 static routes. Traffic between segments stays inside the switch, so internal traffic does not have to go all the way up to the router.
What are the two 10 Gigabit slots for?
They are the 10 Gbps SFP+ uplinks to the network core or a fast storage server: without them, eight 2.5 Gbps ports would be squeezed into a single outlet. Switching capacity reaches 80 Gbps at 59.52 Mpps.
Is this PoE switch silent?
Yes, it has no fan at all, which is rare for a model delivering 160 W of PoE. It can therefore be installed on a desk, on a wall or in a rack as required, and operates from -5 to 40 °C.
How is this switch powered?
By an external 53.5 V, 3.37 A power adapter: allow for a socket and room for the adapter, especially when wall-mounting. The unit itself measures 226 × 131.2 × 35 mm.
How is this switch managed?
Through the Omada SDN platform — from the cloud, a browser or the app —, in standalone or centralised mode. 802.1Q VLANs, quality of service, access control lists and LACP aggregation are all configured from the same interface.
Is the switch new, and where can I find its datasheet?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's document covers the SG2210XMP-M2 in detail, including its PoE features and static routing: datasheet (PDF).
Silent because fanless, it routes between VLANs with OSPF and VRRP, boots from a second flash chip if one fails and withstands 10 kV surges. It is managed for free in the cloud, through the web or from the command line.
Eight PoE+ sockets to power Wi-Fi access points, cameras and IP phones, in a compact fanless unit you forget is in the office. Enterprise-grade AOS-CX system, managed from the cloud or the command line.
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•22 Gigabit PoE+ RJ45 ports and 2 combo ports at 2.5 Gbps PoE+ (copper or fibre)
Designed for enterprise networks, with advanced security and automatic recognition of IP cameras. Lifetime management through Ruijie Cloud for monitoring and remote updates.
Very fast, fully managed enterprise network: Multi-Gigabit 2.5 Gbps ports with PoE++ up to 60 W to power the most demanding Wi-Fi 6E access points and PTZ cameras. Full L3 routing.
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
•8 x Gigabit PoE+ class 4 ports
•2 x 1G SFP ports for uplinks
•PoE budget 67 W, 30 W per port
In stock
4 999 DHincl. VAT4 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
12 of the 24 ports in PoE+ (802.3at), ports 1 to 12
•Up to 30 W per port — access points, IP phones, cameras
Very fast, fully managed enterprise network: Multi-Gigabit 2.5 Gbps ports with PoE++ up to 60 W to power the most demanding Wi-Fi 6E access points and PTZ cameras. Full L3 routing.
•Multi-Gigabit 2.5 Gbps ports, beyond standard Gigabit, for Wi-Fi 6E access points and PTZ cameras
•PoE++ (IEEE 802.3af/at/bt): 240 W total budget, up to 60 W per port
Compact PoE+ access switch (802.3af/at standard) to power IP cameras, Wi-Fi access points or VoIP phones in small spaces. Gigabit/SFP combo uplink, managed through Ruijie Cloud.
Eight PoE+ sockets to power Wi-Fi access points, cameras and IP phones, in a compact fanless unit you forget is in the office. Enterprise-grade AOS-CX system, managed from the cloud or the command line.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
Designed for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote port restart through Ruijie Cloud. Extension up to 250 m in camera mode.
Each PoE+ port delivers up to 30 W, for a total budget of 120 W, rounded out by two fibre links. Managed from the GWN.Cloud platform or locally, with VLANs and advanced security.
•8 PoE+ ports (802.3af/at), total budget 120 W, up to 30 W per port
Powers a whole floor over one cable with 10 Gbps uplinks to the network core: 370 W of PoE+ across the 48 Gigabit ports, layer 3 routing and centralised management from Aruba Central.
•PoE+ (802.3at) on all 48 ports, total budget 370 W
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones