nJoy Balder 3000 Online UPS - 3000 W / 3000 VA - 8 C13 outlets + 1 C19 outlet (PWUP-OL300BA-AZ)
Four controllable outlets make it possible to switch off secondary equipment and save the battery. Around 11 minutes of runtime at half load (1500 W), in a 2U rack as well as in tower form.
Runtime: 11 min at 50% load (1500 W), 26 min at 25%, 3 min at full load
C13 outlets: the format of computer and server power cords
C19 outlet: a reinforced 16 A outlet for power-hungry equipment
4 programmable outlets for power management
Output power factor of 1: all the apparent power is available in watts
Pure sine wave output
Convertible: rack mounting over 2U or tower placement
USB and RS-232 ports and an intelligent port for an optional SNMP or Modbus card
Hot-swappable batteries, up to 6 HR09122F modules
Optional external battery pack to extend the runtime
2 RJ11/RJ45 ports: the network or telephone line is protected against surges
Input on a reinforced C20 socket
Input voltage accepted from 160 to 300 V at full load, from 110 V at half load
An online UPS to protect servers and sensitive equipment: online double conversion, 3000 VA / 3000 W. Technology & protection: power is fully and continuously regenerated — your servers never touch the mains, with no transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise. Power: 3000 VA for 3000 W of real power — its power factor of 1 makes all of the rated power available in watts. Outlets: 8 C13 outlets + 1 heavy-duty C19 outlet for power-hungry equipment. LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software. Ideal, for example, for servers, storage arrays or switches. Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How long does the Balder 3000 run on battery?
26 minutes at 25% load, 11 minutes at 50% (1500 W), 6 minutes at 75% and 3 minutes at full load. It is the headroom you leave that determines the runtime, far more than the capacity printed on the label.
Does this 3000 VA unit really deliver 3000 W?
Yes: its output power factor is 1, so the full 3000 VA is available in watts. On a desktop UPS at 0.55, only 1650 would remain for the same stated rating.
Which outlets does the Balder 3000 have?
Eight C13 outlets and one heavy-duty 16 A C19 outlet for a power-hungry device. Four of the outlets are programmable: they cut power to secondary devices to keep the runtime for what matters most.
How does the Balder 3000 connect to the mains?
Via a heavy-duty C20 inlet, the 16 A format — not the C14 found on a desktop UPS. The accepted voltage ranges from 160 to 300 V at full load, and from as low as 110 V at half load.
Can the Balder 3000 be rack-mounted or used as a tower?
Both: a 2U convertible chassis, 88 mm high and 438 wide, but 630 mm deep — measure your cabinet before ordering. Allow for 27.5 kg.
Can the batteries of the Balder 3000 be replaced without shutting it down?
Yes, they are hot-swappable, and the unit takes up to six HR09122F modules. An external battery pack is available as an option to go further.
Is the output waveform of the Balder 3000 a pure sine wave?
Yes, a pure sine wave, with harmonic distortion below 2% on a linear load and 4% on a non-linear load. Switching to battery is instantaneous, with no interruption of any kind.
How do you monitor the Balder 3000?
Through a USB port, an RS-232 serial port and an intelligent slot that accepts an optional SNMP or Modbus card. Two RJ11/RJ45 ports also protect the network or telephone line against surges.
How much power does the Balder 3000 itself consume?
Very little: its efficiency reaches 91% in normal operation and up to 97% in ECO mode. On a unit that runs day and night, these few percentage points show up directly on the electricity bill.
Is the nJoy Balder 3000 UPS new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document for 3 years. It stays below 50 dB, recharges to 95% in 3 hours and features an internal bypass and cold start. The datasheet covers the rest.
2400 W genuinely available and 13.5 minutes of battery life at half load (1200 W): time enough to save and shut down cleanly. Under 37 dB, it can stay beside the workstation it protects.
26 minutes of runtime for 400 W drawn, 12 minutes at half load (800 W): ample time to save and shut down cleanly. The LCD display shows the load and the remaining runtime without any software.
16 minutes of runtime at half load (800 W), and under 37 dB: it can sit next to a workstation without being heard. Its batteries are replaced without cutting the power.
•16 minutes of runtime at half load (800 W)
•7 minutes of runtime at full load
•6 C13 outlets, the format used by computer and server cords
Nineteen minutes of runtime at half load, extended to fifty with an additional battery cabinet. The 16 12 V batteries are chosen and ordered separately.
Up to four external battery modules extend the 10.5 minutes of runtime at half load. The 2U rack mounting kit, the output cords and the USB cable are included.
•Runtime: 10.5 min at half load, 3.5 min at full load
•Runtime extendable by up to 4 external battery modules
•C13 outlets: the format of computer and server power cords
Quiet at under 37 dB, it holds 11.5 minutes at half load (400 W): enough to save and shut down a NAS or a small server without losing anything. Its batteries are replaced without cutting the power.
•11.5 minutes of runtime at half load (400 W)
•5 minutes of runtime at full load
•4 C13 outlets, the format used by computer and server cords
Doubling the runtime comes down to one extra battery cabinet: 9 minutes at half load become 23 minutes. The 16 12 V batteries are chosen and ordered separately.
Compatible with Synology NAS units over USB: the NAS shuts itself down cleanly when the battery runs low. Around 6 minutes of runtime at half load (400 W), for under 40 dB in operation.
Floor-standing, 68.5 cm high and 54 kg: the tower version, for when there is no rack. Around 11 minutes of runtime at half load (3000 W) and 94% efficiency at full load.
Every outlet is battery-backed, with around 11 minutes of runtime at half load (990 W). Automatic and manual internal bypass, LCD screen and a detachable 2.44 m cord supplied.
Runtime 26 minutes for 400 W drawn
•C13 outlets: the format of computer and server power cords
In stock
9 199 DHincl. VAT9 199,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
8 799 DHincl. VAT8 799,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Runtime with the 16 internal batteries: 19 min at 50% load, 50 min at 25%, 6 min at full load
•With an additional battery cabinet: 50 min at 50% load, 115 min at 25%
•Batteries to be ordered separately: 16 12 V batteries of 7 or 9 Ah
Up to four external battery modules extend the 10.5 minutes of runtime at half load. The 2U rack mounting kit, the output cords and the USB cable are included.
•Runtime: 10.5 min at half load, 3.5 min at full load
•Runtime extendable by up to 4 external battery modules
•C13 outlets: the format of computer and server power cords
Every outlet is battery-backed, with around 11 minutes of runtime at half load (990 W). Automatic and manual internal bypass, LCD screen and a detachable 2.44 m cord supplied.
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
Three reinforced 16 A outlets for power-hungry hardware, eight server outlets, and batteries that are changed without cutting the power. Under 40 dB at one metre, in a rack as in a tower.
•8 C13 outlets: the format of computer and server power cords
2400 W genuinely available and 13.5 minutes of battery life at half load (1200 W): time enough to save and shut down cleanly. Under 37 dB, it can stay beside the workstation it protects.
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
16 minutes of runtime at half load (800 W), and under 37 dB: it can sit next to a workstation without being heard. Its batteries are replaced without cutting the power.
•16 minutes of runtime at half load (800 W)
•7 minutes of runtime at full load
•6 C13 outlets, the format used by computer and server cords
Twenty minutes of runtime at half load (2 400 W), extended to several hours with up to four external battery cabinets. The standard maintenance bypass allows the unit to be swapped without shutting down the equipment.
•Around 20 minutes of runtime at half load (2 400 W)
Quiet at under 37 dB, it holds 11.5 minutes at half load (400 W): enough to save and shut down a NAS or a small server without losing anything. Its batteries are replaced without cutting the power.
•11.5 minutes of runtime at half load (400 W)
•5 minutes of runtime at full load
•4 C13 outlets, the format used by computer and server cords
26 minutes of runtime for 400 W drawn, 12 minutes at half load (800 W): ample time to save and shut down cleanly. The LCD display shows the load and the remaining runtime without any software.