A PoE+ access switch (802.3af/at standard) to power IP cameras, Wi-Fi access points and VoIP phones over the network cable. 128 Gbps switching capacity, L2+ features and management through Ruijie Cloud.
24 Gigabit PoE+ ports (802.3af/at standard)
4 SFP+ 10 Gbps ports (uplinks)
L2+ features: VLAN, STP/RSTP/MSTP, link aggregation (LACP)
Advanced security: IP Source Guard, Anti-ARP Spoofing, DHCP Snooping
128 Gbps switching capacity, 96 Mpps throughput
16,000-entry MAC table
Managed through Ruijie Cloud or a local web interface
Automatic IP camera detection
19" rack format (1U), adaptive-speed fan, noise below 45 dB
L2+ managed rack-mountable switch with 24 Gigabit PoE+ ports and 4 × 10G SFP+ uplinks, combining high-power centralised PoE with core-network performance. The NBS3200-24GT4XS-P-V2 features 24 PoE+ 802.3af/at RJ45 ports and 4 × 10G SFP+ ports for high-speed uplinks. The overall PoE budget reaches 370 W. Non-blocking switching reaches 128 Gbps at 96 Mpps, with a 16,000-entry MAC table. The L2+ feature set covers port-based and advanced VLANs, STP/RSTP/MSTP, IGMP snooping, LACP and a security suite: IP Source Guard, Anti-ARP Spoofing, DHCP Snooping. Surge protection goes up to 6 kV. Centralised management is handled via Ruijie Cloud or the local web interface. Form factor: 19″ rack (440 × 267.5 × 43.6 mm) — PoE budget: 370 W — Switching: 128 Gbps — Forwarding rate: 96 Mpps — Uplinks: 4 × 10G SFP+.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
What is the difference between this model and the NBS3100 from the same range?
The uplinks and internal capacity: this NBS3200 offers 4 10 Gbps SFP+ slots and 128 Gbps of switching capacity, compared with 4 Gigabit SFP slots and 56 Gbps on the NBS3100. The 370 W PoE budget and the 24 access ports are identical.
How are the 370 W of PoE+ shared across 24 ports?
370 W shared by all 24 ports, all PoE+. Twenty-four cameras at 12 W consume less than 300 W and therefore fit without any trade-off; around fifteen power-hungry Wi-Fi access points, on the other hand, use up the budget. The calculation is based on actual consumption.
How many VLANs does this switch support?
4,094 VLANs, across the full ID range, with a table of 16,000 MAC addresses — twice that of the entry-level model. Jumbo frames go up to 9,216 bytes.
How is this switch managed day to day?
Locally via a web interface over HTTPS or via SNMP, and remotely through the free Ruijie cloud. The self-organising network and automatic recognition of IP cameras simplify commissioning, especially on multi-site deployments.
What protections does this switch apply to the network?
IP Source Guard, DHCP snooping, ARP spoofing protection and advanced access control lists, backed up by loopback detection and notification. Everything is set up without complex configuration, from the interface or the cloud.
Is this chassis noisy, and how much space does it take up?
An adaptive-speed fan keeps the noise level below 45 dB, with energy efficiency compliant with the EEE standard. The 1U chassis measures 440 × 357.6 × 43.6 mm: allow for a rack with at least 36 cm of usable depth.
What electrical protection does this switch offer?
6 kV surge protection, in a rugged chassis designed for demanding environments — a point that matters when outdoor cameras are cabled into the building. The equipment is CE and RoHS certified.
Is this switch suitable for a video surveillance installation?
That is what it is designed for: native IP camera recognition, traffic prioritisation and a generous PoE+ budget to power dome cameras, recorders and Wi-Fi access points. The 10 Gigabit links also prevent video streams from saturating the uplink to the recorder.
Is the switch new, and where can I view its datasheet?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's document details the NBS3200-24GT4XS-P, its L2+ features and its environmental conditions: datasheet (PDF).
Eight PoE+ sockets to power Wi-Fi access points, cameras and IP phones, in a compact fanless unit you forget is in the office. Enterprise-grade AOS-CX system, managed from the cloud or the command line.
Silent because fanless, it routes between VLANs with OSPF and VRRP, boots from a second flash chip if one fails and withstands 10 kV surges. It is managed for free in the cloud, through the web or from the command line.
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•22 Gigabit PoE+ RJ45 ports and 2 combo ports at 2.5 Gbps PoE+ (copper or fibre)
Designed for enterprise networks, with advanced security and automatic recognition of IP cameras. Lifetime management through Ruijie Cloud for monitoring and remote updates.
Very fast, fully managed enterprise network: Multi-Gigabit 2.5 Gbps ports with PoE++ up to 60 W to power the most demanding Wi-Fi 6E access points and PTZ cameras. Full L3 routing.
Cisco Catalyst 2960-X managed switch with LAN Base image: 24 Gigabit PoE+ ports with a 370 W budget, 4 SFP 1 Gbps uplink ports and FlexStack-Plus stacking of up to 8 switches. 1U, 5.8 kg, for a 19-inch rack.
Designed for video surveillance: a 384 W PoE+ budget shared across the powered ports, transmission up to 250 m and power maintained even when the switch restarts. Rackable metal housing, VLAN and automatic loop prevention.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
Total PoE+ budget of 384 W to power a large number of cameras, Wi-Fi access points and IP phones. 104 Gbps switching capacity, driven from the Omada SDN cloud.
Managed access switch designed for SMEs and branch offices: powers workstations, Wi-Fi access points and IP cameras over Power over Ethernet, with centralised control from Aruba Central and automated deployment.
•Managed via Aruba Central (cloud or on-premise), web GUI, CLI and REST API
•PoE+ up to 30 W per port (IEEE 802.3af/at, class 4)
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
Designed for SMEs and video surveillance, in a 19″ rackable format: automatic IP camera recognition, PoE consumption alarm and remote port restart through Ruijie Cloud.
Designed for enterprise networks, with advanced security and automatic recognition of IP cameras. Lifetime management through Ruijie Cloud for monitoring and remote updates.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.