Aruba 2530-24-PoE+ managed switch: a cost-effective, reliable and secure switch from the Aruba range, offering a "mobile first" experience. With features such as access control lists, traffic prioritisation and PoE+ models, this switch delivers smooth connectivity. It supports ClearPass Policy Manager, AirWave and Central, making deployment and management easier. Perfect for businesses of all sizes.
Web interface, CLI, IMC (Intelligent Management Center), SNMP, Telnet, RMON1, 802.3 Ethernet, repeater and interface MIBs, FTP, out-of-band management (RS-232C serial or micro-USB)
Cloud management platform
HPE Aruba Networking Central
Layer 2 features
Layer 2 switching, quality of service, traffic prioritisation, sFlow, IPv6
IP routing
None
Stacking and expansion
Virtual stacking of up to 16 switches
Quality of service (QoS)
Yes
Power consumption
237 W (maximum)
Weight
3.81 kg
Technical specifications (continued)
Dimensions (W x D x H)
442 x 322.6 x 44.5 mm
Package contents
HP 2530-24-PoE+ switch only; 19-inch rack mounting kit not included, available as an option
Latency
100 Mb latency: less than 1.7 µs, 1000 Mb latency: less than 1.1 µs
Processor
ARM9E at 800 MHz
Number of ports
19 to 28 ports
Managed
Yes
Security features
Access control lists (ACL), source port filtering, port security, 802.1X, local MAC and web authentication, ARP protection, dynamic IP lockdown, RADIUS and TACACS+, SSL, HPE Aruba Networking ClearPass Policy Manager policies
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
What PoE budget does the Aruba 2530-24-PoE+ offer?
195 W shared across its 24 PoE+ ports, to the 802.3at standard (30 W maximum per port). Enough to power around twenty IP phones or standard cameras, or about ten more power-hungry devices.
Are the 24 PoE+ ports on this switch Gigabit?
No: they run at 10/100 Mbps. Gigabit is reserved for the two 10/100/1000 ports and the two SFP fibre slots, which serve as uplinks. This is an access switch for phones, cameras and office workstations.
What security features does this switch apply?
Access control lists, source port filtering, port security and RADIUS or TACACS+ authentication, with SSL-protected management access. The range supports ClearPass Policy Manager to apply the same policy to wired and Wi-Fi connections.
Can several Aruba 2530-24-PoE+ switches be stacked?
Yes, through virtual stacking of up to 16 units: the switches remain separate chassis but are managed as a single group, from Aruba Central in the cloud or Aruba AirWave on site.
How can you access the switch if the network is down?
Through the out-of-band management port, via RS-232C serial or micro USB. During normal operation, the command-line interface, web browser, configuration menu and IMC console remain available.
What performance and latency does this switch claim?
12.8 Gbps of capacity and up to 9.5 Mpps, with a 16,000-address MAC table. Latency stays below 1.7 µs at 100 Mbps and below 1.1 µs at Gigabit. The 800 MHz ARM9E processor is backed by 128 MB of flash and 256 MB of DDR3.
How much power should you allow for this switch?
237 W maximum, once the 195 W of PoE is being delivered, for 99 BTU/h of heat, on a 100-127 or 200-240 V power supply. This is the figure that sizes the UPS, not the idle consumption.
How much rack space does this switch take up?
442 × 322.6 × 44.5 mm and 3.81 kg: 1U high, 32 cm deep. Plan for a standard 19-inch rack — a shallow wall-mount cabinet will not do.
Is the switch new and covered by a warranty?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's documentation is available in the Aruba 2530 24 PoE+ (J9779A) datasheet. The box contains the switch only.
Rack-mountable Easy Smart switch for an SME that wants to segment and secure its network with VLANs and QoS, without the complexity of a fully managed switch — configurable from a simple web interface.
•802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)
•Per-port QoS and 802.1p/DSCP to prioritise voice and video
•IGMP Snooping, static link aggregation (up to 8 groups)
Rack-mountable Easy Smart switch, the middle ground for an SME that wants VLANs and QoS without the complexity of a fully managed switch, through a simple web interface.
Desktop switch in a sturdy metal casing, with a web interface to prioritise traffic and create VLANs — a sound balance between simplicity and control for a small network.
For SMEs, hotels or schools: two uplink speeds to choose from, 2.5G or 10G fibre, to interconnect your access switches. Completely silent 1U casing, fanless.
Each PoE+ port delivers up to 30 W, for a total budget of 120 W, rounded out by two fibre links. Managed from the GWN.Cloud platform or locally, with VLANs and advanced security.
•8 PoE+ ports (802.3af/at), total budget 120 W, up to 30 W per port
Designed for harsh environments: an IP40 aluminium housing operating from -40 °C to +75 °C, fanless. ERPS ring redundancy and remote management through Ruijie Cloud.
•1 PoE++ port up to 90 W + 3 PoE+ ports at 30 W each
Compact PoE+ access switch (802.3af/at standard) to power IP cameras, Wi-Fi access points or VoIP phones in small spaces. Gigabit/SFP combo uplink, managed through Ruijie Cloud.
For SMEs, hotels, schools or industrial sites: 4 fibre links beyond standard Gigabit to connect your aggregation switches. Completely silent 1U casing, managed locally or from the cloud.
Designed for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote port restart through Ruijie Cloud. Extension up to 250 m in camera mode.
Fully managed and silent switch (fanless), with two 10 Gbps uplinks and two at 2.5 Gbps for a capable SME network core. Management through the HUAWEI eKit App, web interface or SNC.
•24 Gigabit RJ45 ports (10/100/1000)
•2 SFP+ 10 Gbps ports for uplinks
802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)
•Per-port QoS and 802.1p/DSCP to prioritise voice and video
•IGMP Snooping, static link aggregation (up to 8 groups)
Designed for video surveillance: a 384 W PoE+ budget shared across the powered ports, transmission up to 250 m and power maintained even when the switch restarts. Rackable metal housing, VLAN and automatic loop prevention.
•Total PoE+ budget of 384 W, up to 30 W per port (802.3af/at)
•2 Gigabit SFP ports for a fibre link
•Fast PoE and Perpetual PoE: power maintained when the switch restarts
Managed access switch designed for SMEs and branch offices: powers workstations, Wi-Fi access points and IP cameras over Power over Ethernet, with centralised control from Aruba Central and automated deployment.
•Managed via Aruba Central (cloud or on-premise), web GUI, CLI and REST API
•PoE+ up to 30 W per port (IEEE 802.3af/at, class 4)
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
•Switching capacity 128 Gbps, 95 Mpps
•4 SFP+ 10 Gbps uplinks
•Fast PoE and Perpetual PoE (continuity during restarts)
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
•Class 4 PoE (802.3af/at), up to 30 W per port
•Managed through the Aruba Instant On app, the cloud or the local web interface
•802.1Q VLANs, QoS, LACP link aggregation (8 trunks), IGMP Snooping
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•22 Gigabit PoE+ RJ45 ports and 2 combo ports at 2.5 Gbps PoE+ (copper or fibre)
Designed for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote port restart through Ruijie Cloud. Extension up to 250 m in camera mode.
•PoE+ (802.3af/at standard)
•Managed through Ruijie Cloud, a mobile app or a web interface
Cisco Catalyst 2960-X managed switch with LAN Base image: 24 Gigabit PoE+ ports with a 370 W budget, 4 SFP 1 Gbps uplink ports and FlexStack-Plus stacking of up to 8 switches. 1U, 5.8 kg, for a 19-inch rack.
Covers a whole floor of cameras, Wi-Fi access points and IP phones on a single device, without multiplying power units. 10G links and a capacity of 176 Gbps absorb the combined traffic. VLANs, security and administration of enterprise equipment.
•Switching capacity 176 Gbps, 131 Mpps
•4 SFP+ 10 Gbps uplinks
•Fast PoE and Perpetual PoE (continuity during restarts)
