An online UPS to protect a server or sensitive equipment: online double-conversion technology, 1000 VA / 800 W. Technology & protection: power is fully and continuously regenerated — your devices are never connected directly to the mains, with no transfer time whatsoever. Complete protection against outages, surges, voltage fluctuations and electrical noise. Power: 1000 VA for 800 W of real power — for a small server, a NAS or network equipment, for example. Runtime: about 10 minutes at half load (400 W), 6 minutes at 70%. Outlets: 3 C13 outlets (computer and server power cords). Like every online model, it uses active cooling: best installed in a technical room. LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software. Ideal, for example, for a small server, a NAS or network equipment. Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How long does the SRV1KI run on battery?
10 minutes at half load, i.e. 400 W, and 6 minutes at 70%, i.e. 560 W. A full recharge then takes 4 hours, on a preinstalled sealed lead-acid battery.
Are all three outlets on the SRV1KI battery-backed?
Yes, all three C13 outlets are powered by the battery: none is reserved for surge protection only. Input is through a C14 inlet, with a 1.50 m cord included.
Can an online UPS fit in a small room?
This one, yes: just 9.3 kg, in a compact tower case that slides under a desk. It is nonetheless rated at 50 dBA — double conversion requires active cooling, so it should not be installed right next to a workstation.
What does double conversion bring on a 1000 VA unit?
The power is continuously regenerated: a sine wave output, synchronised at 50/60 Hz ± 3 Hz, with an accepted input of 160 to 280 V — and up to 110-285 V at half load. Your equipment never sees the actual shape of the mains supply.
How much power can the SRV1KI handle?
800 W for the stated 1000 VA. It is this wattage that must be compared with the combined consumption of your server, NAS or switch — never the VA figure in the product name.
Can the UPS be serviced without powering down the equipment?
Yes, an automatic and manual internal bypass keeps power flowing: the automatic one in the event of a fault, the manual one for a deliberate transfer to direct mains power.
How can the SRV1KI shut down a server automatically?
Through the USB port or the DB-9 RS-232 serial port: both cables are included, along with the software CD and the manual. A free slot lets you add a network management card.
How can I tell whether the UPS is overloaded or running on battery?
Through a multifunction LCD console on the front panel, backed by three distinct audible alarms: switch to battery mode, low-battery threshold, and a continuous tone in the event of overload.
Is the APC Easy UPS SRV1KI new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for a period of 2 years. It accepts an input frequency of 40 to 70 Hz, which allows it to run behind an unstable source. The datasheet covers the rest.
An online double-conversion 2U rack or tower UPS for a network rack: 900 W of pure sine wave power, hot-swappable batteries, runtime extendable with an external pack and rail kit included.
Short 438 mm depth for small racks: power continuously regenerated with zero transfer time, 4 C13 outlets, hot-swappable batteries and automatic server shutdown over USB or RS232.
Quiet at under 37 dB, it holds 11.5 minutes at half load (400 W): enough to save and shut down a NAS or a small server without losing anything. Its batteries are replaced without cutting the power.
•11.5 minutes of runtime at half load (400 W)
•5 minutes of runtime at full load
•4 C13 outlets, the format used by computer and server cords
An online double-conversion tower UPS for a server or a small rack: 1800 W of pure sine wave power, no transfer time, 13 minutes at half load and an input tolerated from 80 to 280 V.
2400 W genuinely available and 13.5 minutes of battery life at half load (1200 W): time enough to save and shut down cleanly. Under 37 dB, it can stay beside the workstation it protects.
16 minutes of runtime at half load (800 W), and under 37 dB: it can sit next to a workstation without being heard. Its batteries are replaced without cutting the power.
•16 minutes of runtime at half load (800 W)
•7 minutes of runtime at full load
•6 C13 outlets, the format used by computer and server cords
26 minutes of runtime for 400 W drawn, 12 minutes at half load (800 W): ample time to save and shut down cleanly. The LCD display shows the load and the remaining runtime without any software.
A 2000 VA / 1800 W double-conversion online UPS in 2U rack format, for a server, a NAS or the core of a network. Pure sine wave output, four C13 outlets, LCD screen, USB, RS-232 and a network card slot; the rails are ordered separately.
•Runtime: 13 min at half load, 4.5 min at full load
In stock
8 599 DHincl. VAT8 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
9 999 DHincl. VAT9 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
An online double-conversion 2U rack or tower UPS: 1800 W of pure sine wave power for a server and its rack, efficiency up to 94%, hot-swappable batteries and runtime extendable with an external pack.
•2000 VA / 1800 W, online double conversion
•2U rack or tower, brackets and rail kit included
•Pure sine wave, zero transfer time
In stock
10 308 DHincl. VAT10 308,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
10 399 DHincl. VAT10 399,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Runtime 12 minutes at half load (800 W)
•Runtime 26 minutes for 400 W drawn
•C13 outlets: the format of computer and server power cords
The most powerful Amplon RT: 2700 W of pure sine wave power, in 2U rack or tower, for several servers or a storage rack. Hot-swappable batteries, extendable runtime and efficiency up to 94%.
Quiet at under 37 dB, it holds 11.5 minutes at half load (400 W): enough to save and shut down a NAS or a small server without losing anything. Its batteries are replaced without cutting the power.
•11.5 minutes of runtime at half load (400 W)
•5 minutes of runtime at full load
•4 C13 outlets, the format used by computer and server cords
Short 438 mm depth for small racks: power continuously regenerated with zero transfer time, 4 C13 outlets, hot-swappable batteries and automatic server shutdown over USB or RS232.
26 minutes of runtime for 400 W drawn, 12 minutes at half load (800 W): ample time to save and shut down cleanly. The LCD display shows the load and the remaining runtime without any software.
An online double-conversion 2U rack or tower UPS for a network rack: 900 W of pure sine wave power, hot-swappable batteries, runtime extendable with an external pack and rail kit included.
16 minutes of runtime at half load (800 W), and under 37 dB: it can sit next to a workstation without being heard. Its batteries are replaced without cutting the power.
•16 minutes of runtime at half load (800 W)
•7 minutes of runtime at full load
•6 C13 outlets, the format used by computer and server cords
2400 W genuinely available and 13.5 minutes of battery life at half load (1200 W): time enough to save and shut down cleanly. Under 37 dB, it can stay beside the workstation it protects.
Every outlet is battery-backed, with around 11 minutes of runtime at half load (990 W). Automatic and manual internal bypass, LCD screen and a detachable 2.44 m cord supplied.
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
A 2000 VA / 1800 W double-conversion online UPS in 2U rack format, for a server, a NAS or the core of a network. Pure sine wave output, four C13 outlets, LCD screen, USB, RS-232 and a network card slot; the rails are ordered separately.
