250 W PoE+ budget for a large estate of cameras and Wi-Fi access points. 56 Gbps switching capacity, managed from the Omada SDN cloud with zero-touch provisioning (ZTP).
TP-Link TL-SG2428P JetStream 28-port Gigabit Smart switch: smart management and PoE+ for growing networks. Ports:24 Gigabit PoE+ ports + 4 SFP slots, PoE budget of 250 W. Functions:full L2 and L3 Lite static routing, VLAN, QoS, ACL. PoE: powers cameras and Wi-Fi access points over the network cable. Management:Omada SDN cloud, centralised monitoring. Use cases: SMEs, video surveillance, Wi-Fi networks. A Smart PoE+ switch that combines power and simplicity.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
What PoE budget does the TL-SG2428P offer across its 24 ports?
250 W in total, with a maximum of 30 W per port to the 802.3af and 802.3at standards. Twenty cameras at 12 W fit within the budget; eight Wi-Fi access points at 30 W already use it up. Four Gigabit SFP slots complete the front panel for fibre.
Can this switch route between VLANs?
Yes, with static routing: up to 32 IPv4 or IPv6 routes across 16 IP interfaces, with DHCP server and DHCP relay per interface, per VLAN and at Layer 2. Traffic between segments then stays within the switch.
How do you deploy this switch at a remote site?
With Omada zero-touch provisioning: the configuration is prepared remotely, without sending a technician on site. This requires an Omada cloud controller; the OC200 or OC300 hardware controller and the software version cover other needs.
How do you protect 24 network sockets from an unknown computer?
With 802.1X and a RADIUS server, IP-MAC-Port binding, port security, access control lists, denial-of-service attack defence, storm control and DHCP snooping.
Are voice and video prioritised on this model?
Yes: quality of service works across Layers 2 to 4 — port-based priority, 802.1p or DSCP — and a voice VLAN isolates telephony. IGMP snooping sends multicast streams only to the ports that request them.
Does this unit have fans, and where should it be installed?
Two fans cool this PoE model: it belongs in a rack or a network room, not on a desk. It is rack-mountable, with 24 access ports and 4 fibre slots on the front.
What Layer 2 features does this switch offer?
IGMP and MLD snooping, 802.1Q tag-based, MAC-based or protocol-based VLANs, STP, RSTP and MSTP, link aggregation, port isolation, port mirroring and 802.3x flow control — all managed from the web interface or the Omada controller.
What internal performance does this 28-port model offer?
56 Gbps of switching capacity and 41.66 Mpps, with an 8,000-entry MAC address table. It is sized for the 24 Gigabit ports and the 4 SFP slots all working together at peak times.
Is this switch IPv6-ready?
Yes: management, access control lists, quality of service and MLD snooping work over IPv6. The migration can therefore be done without replacing the switch, which matters for rack equipment meant to last.
Is the switch new, and where can I find its datasheet?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's document details the JetStream Smart range and compares the 8-, 10- and 28-port models: PDF datasheet.
Silent because fanless, it routes between VLANs with OSPF and VRRP, boots from a second flash chip if one fails and withstands 10 kV surges. It is managed for free in the cloud, through the web or from the command line.
Eight PoE+ sockets to power Wi-Fi access points, cameras and IP phones, in a compact fanless unit you forget is in the office. Enterprise-grade AOS-CX system, managed from the cloud or the command line.
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
Covers a whole floor of cameras, Wi-Fi access points and IP phones on a single device, without multiplying power units. 10G links and a capacity of 176 Gbps absorb the combined traffic. VLANs, security and administration of enterprise equipment.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•22 Gigabit PoE+ RJ45 ports and 2 combo ports at 2.5 Gbps PoE+ (copper or fibre)
Designed for enterprise networks, with advanced security and automatic recognition of IP cameras. Lifetime management through Ruijie Cloud for monitoring and remote updates.
•4 SFP 1 Gbps ports (uplinks)
6 069 DHincl. VAT6 069,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•8 x Gigabit PoE+ class 4 ports
•2 x 1G SFP ports for uplinks
•PoE budget 67 W, 30 W per port
In stock
4 999 DHincl. VAT4 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
12 of the 24 ports in PoE+ (802.3at), ports 1 to 12
•Up to 30 W per port — access points, IP phones, cameras
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
•Class 4 PoE (802.3af/at), up to 30 W per port
•Managed through the Aruba Instant On app, the cloud or the local web interface
•802.1Q VLANs, QoS, LACP link aggregation (8 trunks), IGMP Snooping
Designed for video surveillance: a 384 W PoE+ budget shared across the powered ports, transmission up to 250 m and power maintained even when the switch restarts. Rackable metal housing, VLAN and automatic loop prevention.
•Total PoE+ budget of 384 W, up to 30 W per port (802.3af/at)
•2 Gigabit SFP ports for a fibre link
•Fast PoE and Perpetual PoE: power maintained when the switch restarts
Designed for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote port restart through Ruijie Cloud. Extension up to 250 m in camera mode.
•PoE+ (802.3af/at standard)
•Managed through Ruijie Cloud, a mobile app or a web interface
Layer 3 managed enterprise switch (static routing and RIP) that powers all its ports over the network cable, for cameras and Wi-Fi access points. Switching capacity 128 Gbps, upgradable to 10 Gbps fibre.
Powers a whole floor over one cable with 10 Gbps uplinks to the network core: 370 W of PoE+ across the 48 Gigabit ports, layer 3 routing and centralised management from Aruba Central.
•PoE+ (802.3at) on all 48 ports, total budget 370 W
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
A Layer 3 enterprise switch with Gigabit PoE ports and 10G SFP+ links. A 400 W PoE budget to power Wi-Fi access points, cameras and IP phones without separate electrical wiring. DC power redundancy.
•24 Gigabit RJ45 ports including 16 PoE+ and 8 PoE++
•2 SFP+ 10 Gbps ports (uplinks)
•Total PoE budget of 400 W (up to 64 W/port in PoE++)
Managed access switch designed for SMEs and branch offices: powers workstations, Wi-Fi access points and IP cameras over Power over Ethernet, with centralised control from Aruba Central and automated deployment.
•Managed via Aruba Central (cloud or on-premise), web GUI, CLI and REST API
•PoE+ up to 30 W per port (IEEE 802.3af/at, class 4)
Cisco Catalyst 2960-X managed switch with LAN Base image: 24 Gigabit PoE+ ports with a 370 W budget, 4 SFP 1 Gbps uplink ports and FlexStack-Plus stacking of up to 8 switches. 1U, 5.8 kg, for a 19-inch rack.