TP-Link TL-SG2218P JetStream 18-port Gigabit Smart switch: a compact managed PoE+ switch for small installations. Ports:16 Gigabit PoE+ ports + SFP uplinks. PoE: cameras, Wi-Fi access points and IP phones powered over a single cable. Functions: VLAN, QoS, IGMP, port isolation, loop prevention. Management: centralised through the Omada SDN cloud. Use cases: shops, offices, small video surveillance networks. A Smart PoE+ switch that is ideal for expanding a network without complexity.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How many of the TL-SG2218P's ports supply power?
Sixteen out of eighteen: sixteen Gigabit PoE+ ports at up to 30 W each, within a 150 W budget, plus two SFP slots for fibre. With sixteen powered ports, the budget is shared: allow around 9 W per port if all of them are loaded.
Can this switch route between VLANs?
Yes, with static routing: up to 32 IPv4 or IPv6 routes on 16 IP interfaces, with a DHCP server and relay. Segmenting the network into 802.1Q VLANs therefore does not mean sending every internal exchange up to the router.
Which Layer 2 features does this switch offer?
IGMP and MLD snooping, 802.1Q tag-based, MAC-based or protocol-based VLANs, STP, RSTP and MSTP, link aggregation, port isolation, port mirroring and 802.3x flow control.
How do you protect sixteen network outlets from an unknown computer?
With 802.1X and a RADIUS server, backed up by IP-MAC-Port binding, port security, access control lists, denial-of-service attack defence, storm control and DHCP snooping.
How is this switch managed?
From the Omada SDN platform — cloud, web interface or app — or locally via the web interface, CLI, SNMP and RMON. Dual image lets you roll back to the previous firmware version if an update fails.
What internal performance does this 18-port model offer?
36 Gbps of switching capacity and 26.78 Mpps, with an 8,000-entry MAC address table. It is a 19-inch rack-mountable unit, to be installed in the rack with the site's other active equipment.
Are voice and video given priority?
Yes: quality of service works across Layers 2 to 4 — port-based, 802.1p or DSCP priority — with a dedicated voice VLAN, and IGMP snooping sends multicast only to the ports that request it.
Is the switch new, and where can I find its datasheet?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's document details the JetStream Smart range and its security, routing and quality of service features: PDF datasheet.
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
Eight PoE+ sockets to power Wi-Fi access points, cameras and IP phones, in a compact fanless unit you forget is in the office. Enterprise-grade AOS-CX system, managed from the cloud or the command line.
Silent because fanless, it routes between VLANs with OSPF and VRRP, boots from a second flash chip if one fails and withstands 10 kV surges. It is managed for free in the cloud, through the web or from the command line.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•22 Gigabit PoE+ RJ45 ports and 2 combo ports at 2.5 Gbps PoE+ (copper or fibre)
Designed for enterprise networks, with advanced security and automatic recognition of IP cameras. Lifetime management through Ruijie Cloud for monitoring and remote updates.
Very fast, fully managed enterprise network: Multi-Gigabit 2.5 Gbps ports with PoE++ up to 60 W to power the most demanding Wi-Fi 6E access points and PTZ cameras. Full L3 routing.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
•Class 4 PoE (802.3af/at), up to 30 W per port
•Managed through the Aruba Instant On app, the cloud or the local web interface
•802.1Q VLANs, QoS, LACP link aggregation (8 trunks), IGMP Snooping
Total PoE+ budget of 384 W to power a large number of cameras, Wi-Fi access points and IP phones. 104 Gbps switching capacity, driven from the Omada SDN cloud.
Each PoE+ port delivers up to 30 W, for a total budget of 120 W, rounded out by two fibre links. Managed from the GWN.Cloud platform or locally, with VLANs and advanced security.
•8 PoE+ ports (802.3af/at), total budget 120 W, up to 30 W per port
Cisco Catalyst 2960-X managed switch with LAN Base image: 24 Gigabit PoE+ ports with a 370 W budget, 4 SFP 1 Gbps uplink ports and FlexStack-Plus stacking of up to 8 switches. 1U, 5.8 kg, for a 19-inch rack.
Designed for video surveillance: a 384 W PoE+ budget shared across the powered ports, transmission up to 250 m and power maintained even when the switch restarts. Rackable metal housing, VLAN and automatic loop prevention.
•Total PoE+ budget of 384 W, up to 30 W per port (802.3af/at)
•2 Gigabit SFP ports for a fibre link
•Fast PoE and Perpetual PoE: power maintained when the switch restarts
Designed for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote port restart through Ruijie Cloud. Extension up to 250 m in camera mode.
•PoE+ (802.3af/at standard)
•Managed through Ruijie Cloud, a mobile app or a web interface
48 Gigabit ports, half of them PoE+ (ports 1 to 24), for mixed SME or campus deployments — simplified control from the Aruba Instant On app, with no subscription.
•24 of the 48 ports in PoE+ (802.3at), ports 1 to 24
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones