TP-Link TL-SG1428PE L2 Managed Network Switch Gigabit Ethernet (10/100/1000) Power over Ethernet supported
28 Gigabit ports in total: 26 RJ45, 24 of them PoE+ (250 W budget), and 2 SFP fibre slots, to power and connect a whole floor of cameras and Wi-Fi access points.
28 Gigabit ports: 26 RJ45, 24 of them PoE+, and 2 SFP fibre slots
PoE+ 802.3af/at, up to 30 W per port, 250 W total budget
Switching capacity 56 Gbps, throughput 41.7 Mpps
VLANs, QoS and IGMP Snooping configurable through the web interface
Link aggregation and port mirroring
MAC address table of 8,000 entries
19-inch 1U rack-mountable, 2 fans
Ref.: TL-SG1428PE
Out of stock
1/3
4 195,00 DHincl. VAT
Out of stock
Product overview
TP-Link TL-SG1428PE managed switch: 28 Gigabit ports — 26 Gigabit RJ45 ports, including 24 PoE+, and 2 Gigabit SFP slots — with a 250 W PoE budget to power IP cameras, Wi-Fi access points and IP phones in large numbers over a single network cable. PoE+: 24 802.3at-compliant ports, up to 30 W per port — ideal for covering an entire floor with Wi-Fi or deploying a professional video surveillance system. L2 management: configurable via web interface with VLAN, QoS, IGMP snooping, link aggregation, flow control, port mirroring — management suited to SMEs, hotels and educational institutions. Form factor: 19-inch 1U rack-mountable, 440 × 220 × 44 mm, 2 fans. Also:56 Gbit/s switching capacity, 41.7 Mpps throughput, 8K MAC table, 4.1 MB buffer, 1000BASE-X fibre, 10,000-byte jumbo frames.
Web interface and Easy Smart Configuration Utility (Windows)
Cloud management platform
None
Layer 2 features
IGMP snooping v1/v2/v3 (128 multicast entries), static link aggregation (8 groups of 4 ports), loop detection, flow control, port mirroring, port statistics, cable test
IP routing
None
Quality of service (QoS)
Port-based priority, 802.1p and DSCP, ingress and egress rate limiting, storm control
Power consumption
299.2 W maximum with 250 W PoE load, 25.5 W without PoE load
Dimensions (W x D x H)
440 x 220 x 44 mm
Technical specifications (continued)
Package contents
Switch, power cord, installation guide, rack-mount kit, rubber feet
Number of ports
19 to 28 ports
Managed
Yes
Security features
None
Power supply
Internal 100-240 V AC power supply, 50/60 Hz
Cooling system
2 fans, 35.5 to 47.8 dBA
Operating temperature
0 to 50 °C
Operating humidity
10 to 90% RH, non-condensing
PoE power
Yes
Port speed
1 Gbps (Gigabit)
Management level
Layer 2
PoE standard
PoE+ (802.3at, up to 30 W/port)
PoE budget
131 to 250 W
Fibre slots (SFP)
Yes
Mounting
19-inch rack-mountable
Warranty
1 year
Specific references
EAN
6935364072209
Customer reviews
No reviews yet
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How many of the TL-SG1428PE's ports supply PoE+?
24 of the 26 copper ports, at up to 30 W each under the 802.3af and 802.3at standards, within a total budget of 250 W. Two SFP slots for fibre come on top — 28 ports in total.
How many VLANs can you create on this switch?
32 VLANs, port-based or tag-based, configured from the web interface. That is what “L2 managed” means: enough to isolate cameras from workstations, without the complexity of a fully managed switch.
How much electrical power does this switch draw?
304.7 W at most, including the 250 W of PoE, from a built-in power supply accepting 100 to 240 V at 50/60 Hz. Size the UPS on this figure if the cameras need to stay up through a power cut.
Does this chassis have fans, and up to what temperature does it run?
Two fans cool it, and it operates from 0 to 50 °C — an unusually wide margin, welcome in a technical room without air conditioning. It is a 1U unit, with a rack-mount kit included.
Which operating tools does this switch offer?
Port mirroring to analyse traffic, link aggregation, broadcast storm control, quality of service with four queues and IGMP filtering for multicast — all from the web interface.
What internal performance does this 28-port model offer?
56 Gbps of switching capacity and 41.7 Mpps, with an 8,000-entry MAC address table, 4.1 MB of buffer and jumbo frames up to 10,000 bytes. Cabling from category 3 to 6 is supported.
Is the switch new and covered by a warranty?
Yes, new equipment, with the invoice serving as the warranty document. This is the TP-Link TL-SG1428PE, a Layer 2 managed switch with 24 PoE+ ports, CE, FCC and RoHS certified.
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
•Switching capacity 128 Gbps, 95 Mpps
•4 SFP+ 10 Gbps uplinks
•Fast PoE and Perpetual PoE (continuity during restarts)
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•22 Gigabit PoE+ RJ45 ports and 2 combo ports at 2.5 Gbps PoE+ (copper or fibre)
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
Managed switch that keeps your PoE equipment powered even during a restart (perpetual PoE), for continuity of service on critical cameras or Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
•Class 4 PoE (802.3af/at), up to 30 W per port
•Managed through the Aruba Instant On app, the cloud or the local web interface
•802.1Q VLANs, QoS, LACP link aggregation (8 trunks), IGMP Snooping
Layer 2 Gigabit switch for SMEs, with PoE+ ports to power cameras and Wi-Fi access points, plus SFP fibre links. Silent rackable format, driven through UniFi Network.
Designed for SMEs and video surveillance: automatic IP camera recognition, loop prevention and remote port restart through Ruijie Cloud. Extension up to 250 m in camera mode.
•PoE+ (802.3af/at standard)
•Managed through Ruijie Cloud, a mobile app or a web interface
Managed switch that powers up to 24 devices (cameras, Wi-Fi access points, IP phones) over the network cable, with a 400 W PoE+ budget. Uplinks at 2.5 Gbps for recent access points.
48 Gigabit ports, half of them PoE+ (ports 1 to 24), for mixed SME or campus deployments — simplified control from the Aruba Instant On app, with no subscription.
•24 of the 48 ports in PoE+ (802.3at), ports 1 to 24
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
Managed access switch designed for SMEs and branch offices: powers workstations, Wi-Fi access points and IP cameras over Power over Ethernet, with centralised control from Aruba Central and automated deployment.
•Managed via Aruba Central (cloud or on-premise), web GUI, CLI and REST API
•PoE+ up to 30 W per port (IEEE 802.3af/at, class 4)
