APC E3MUPS80KHBS Double-Conversion (Online) UPS 80 kVA 80000 W (E3MUPS80KHBS)
Three-phase 400 V at the input as well as the output, supplied without batteries so the runtime can be put together as needed. Built-in static bypass, touchscreen and EcoStruxure remote monitoring, for small and medium data centres.
Three-phase 400 V input and output, also 380 and 415 V
Supplied without batteries: runtime to be put together with modular internal batteries
Built-in static bypass
LCD touchscreen interface
Remote monitoring and management in the cloud with EcoStruxure
Overload allowed 10 min at 125 % and 60 s at 150 %
Input power factor 0.99 at full load
Harmonic distortion below 3 % at the input as well as the output
Noise level 65 dBA
Dust filter, installation guide and commissioning service supplied
Keep your power supply running without interruption with the APC E3MUPS80KHBS. This 80 kVA UPS delivers 80,000 W of output power, ideal for critical environments. With its double-conversion (online) technology and sine waveform, it provides effective protection against power interruptions and fluctuations. Its compact tower design and LCD display make management intuitive. Perfect for keeping your sensitive systems reliable and secure.
- Double-conversion (online) - 80 kVA 80,000 W - Waveform: Sine - Sealed Lead Acid (VRLA) 240 V - White tower
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
Are batteries included with the E3MUPS80KHBS?
No: the unit is supplied without batteries. Runtime is designed per project, with modular internal batteries chosen according to the backup time required. It is the first item to cost, along with installation.
Does the E3MUPS80KHBS require a three-phase connection?
Yes: input and output are three-phase at 400 V — also 380 or 415 V —, on a 5-wire terminal block (3 phases, neutral, earth). Input current reaches 104 A per phase: the electrical circuit must be sized accordingly.
What input voltage range does the UPS accept?
342 to 477 V, at a frequency of 40 to 70 Hz. The input power factor reaches 0.99 at full load, with harmonic distortion below 3%: the UPS does not pollute the upstream grid.
How does the UPS handle an overload?
10 minutes at 125% load and 60 seconds at 150%. These margins cover the start-up peaks of an entire room, but not sizing that is permanently inadequate.
What type of bypass does the E3MUPS80KHBS have?
A built-in static bypass: it transfers the equipment to direct mains power in the event of an internal fault or overload, with no mechanical parts and therefore no switching time.
How is an 80 kVA UPS like this one monitored?
Through a touchscreen interface on the front panel and through the EcoStruxure platform, which provides remote monitoring and management in the cloud. A USB port is also available locally.
How much space and weight should be allowed for in the room?
A cabinet 197 cm high, 60 cm wide and 100 cm deep, weighing 339 kg — without batteries. Access to the room, the door and the floor must be checked before ordering.
What is supplied with the E3MUPS80KHBS?
A dust filter, the installation guide and a start-up service. On a UPS of this size, commissioning by a qualified technician is part of the delivery, not an option.
Is the APC E3MUPS80KHBS new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document. It delivers a sine wave with distortion below 3%, operates between 0 and 40 °C, and its noise level of 65 dBA confines it to a dedicated electrical room.
Network management card already fitted, with environmental monitoring: it is administered and raises alerts remotely. 9 minutes of runtime at 50% load (10 kW), extendable with battery packs.
•Runtime: 9 min at 50% load (10 kW), 5 min at 70% (14 kW)
•An external battery pack is included; runtime remains extendable
•Network Management Card 3 pre-installed, with environmental monitoring
Fifteen minutes of runtime at full load, internal batteries included. Dust filter and conformal-coated boards: it is made for demanding premises, on a three-phase 400 V input tolerated from 304 to 477 V.
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
•4 C19 outlets, heavy-duty 16 A, also battery-backed
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
16 kW genuinely available and around 14 minutes of runtime at half load, extendable with up to four battery cabinets. Terminal block input and output, for hard-wired infrastructure.
•16 kW usable output
•Around 14 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
A free-standing tower on castors, with an LCD screen showing the load, the battery status and the voltages. Around 16 minutes of runtime at half load, extendable with up to four battery cabinets.
•Around 16 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
Three reinforced 16 A outlets for power-hungry hardware, eight server outlets, and batteries that are changed without cutting the power. Under 40 dB at one metre, in a rack as in a tower.
•8 C13 outlets: the format of computer and server power cords
All the power available in watts: 10,000 W usable, as many as the VA. Around 7 minutes of runtime at half load (5000 W) to shut down a full rack cleanly, in only 4U.
For a whole infrastructure: 9 minutes of runtime at half load (5000 W) and 5 minutes at 70%, the time it takes to switch over to a generator. 94% efficiency at full load and internal bypass.
A maintenance bypass supplied as standard allows the UPS to be replaced without shutting down the equipment it powers. Around 15 minutes of runtime at half load (4 000 W), extendable with four battery cabinets.
•Around 15 minutes of runtime at half load (4 000 W)
•Runtime extendable with one to four external battery cabinets
•Internal batteries included: 2 strings of 7 Ah, expandable to 3 for more runtime
•Three-phase 400 V input and output, also 380 or 415 V
In stock
92 399 DHincl. VAT92 399,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
In stock
65 999 DHincl. VAT65 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
In stock
51 199 DHincl. VAT51 199,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
49 999 DHincl. VAT49 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Internal bypass and maintenance bypass as standard
In stock
41 999 DHincl. VAT41 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•3 C19 outlets: reinforced 16 A outlets for power-hungry equipment
•Terminal block input: fixed wiring, to be installed by an electrician
A maintenance bypass supplied as standard allows the UPS to be replaced without shutting down the equipment it powers. Around 15 minutes of runtime at half load (4 000 W), extendable with four battery cabinets.
•Around 15 minutes of runtime at half load (4 000 W)
•Runtime extendable with one to four external battery cabinets
•Internal bypass and maintenance bypass as standard
16 kW genuinely available and around 14 minutes of runtime at half load, extendable with up to four battery cabinets. Terminal block input and output, for hard-wired infrastructure.
•16 kW usable output
•Around 14 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
A free-standing tower on castors, with an LCD screen showing the load, the battery status and the voltages. Around 16 minutes of runtime at half load, extendable with up to four battery cabinets.
For a whole infrastructure: 9 minutes of runtime at half load (5000 W) and 5 minutes at 70%, the time it takes to switch over to a generator. 94% efficiency at full load and internal bypass.
Fifteen minutes of runtime at full load, internal batteries included. Dust filter and conformal-coated boards: it is made for demanding premises, on a three-phase 400 V input tolerated from 304 to 477 V.
Doubling the runtime comes down to one extra battery cabinet: 9 minutes at half load become 23 minutes. The 16 12 V batteries are chosen and ordered separately.
Nineteen minutes of runtime at half load, extended to fifty with an additional battery cabinet. The 16 12 V batteries are chosen and ordered separately.
Floor-standing, 68.5 cm high and 54 kg: the tower version, for when there is no rack. Around 11 minutes of runtime at half load (3000 W) and 94% efficiency at full load.
All the power available in watts: 10,000 W usable, as many as the VA. Around 7 minutes of runtime at half load (5000 W) to shut down a full rack cleanly, in only 4U.
Network management card already fitted, with environmental monitoring: it is administered and raises alerts remotely. 9 minutes of runtime at 50% load (10 kW), extendable with battery packs.
•Runtime: 9 min at 50% load (10 kW), 5 min at 70% (14 kW)
