APC E3MUPS100KHS Double-Conversion (Online) UPS 100 kVA 100000 W (E3MUPS100KHS)
A stated efficiency of 94.8 % on a three-phase 400 V machine fed by an external battery system. Touchscreen, built-in static bypass and EcoStruxure cloud monitoring, in a 145 kg tower format.
Three-phase 400 V input and output, also 380 and 415 V
External battery system to be provided
Efficiency 94.8 %
Built-in static bypass
LCD touchscreen interface
Remote monitoring and management in the cloud with EcoStruxure
Input power factor 0.99 at full load
Output harmonic distortion below 3 %
Noise level 65 dBA
Tower format, 91.5 x 36 x 85 cm
Weight 145 kg
Ref.: E3MUPS100KHS
Out of stock
1/4
227 599,00 DHincl. VAT
Out of stock
Product overview
Optimise your power supply with the APC E3MUPS100KHS, a 100 kVA, 100,000 W double-conversion (online) UPS. Ideal for delivering stable power, it provides a sine waveform for maximum protection of sensitive equipment. Its white tower design includes an LCD display for easy management. With 94.8% efficiency and a high power factor of 0.99, this UPS delivers superior performance across a wide range of professional environments.
- Double-conversion (online) - 100 kVA 100,000 W - Waveform: Sine - White tower
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
Is the battery system included with the E3MUPS100KHS?
No: an external battery system must be provided. It is what will determine the actual runtime, and it accounts for a significant share of the project's budget and footprint — to be costed from the outset.
Does the E3MUPS100KHS require a three-phase connection?
Yes: input and output are three-phase at 400 V — also 380 or 415 V —, on a 5-wire terminal block (3 phases, neutral, earth). Input current reaches 177 A per phase.
What efficiency does the E3MUPS100KHS achieve?
94.8%. On a 100 kW unit running continuously, each point of efficiency means one kilowatt less heat to remove — the air-conditioning calculation depends directly on it.
What input voltage range does the UPS accept?
342 to 477 V, at a frequency of 40 to 70 Hz. The input power factor reaches 0.99 at full load: the UPS sends virtually no harmonics back onto the upstream grid.
What type of bypass does the E3MUPS100KHS have?
A built-in static bypass: it transfers the equipment to direct mains power in the event of an internal fault or overload, with no mechanical parts and therefore no switching time.
How is a 100 kVA UPS monitored?
Through a touchscreen interface on the front panel and through the EcoStruxure platform, which provides remote monitoring and management in the cloud. A USB port remains available locally.
How much space and weight should be allowed for in the room?
A cabinet 91.5 cm high, 36 cm wide and 85 cm deep, weighing 145 kg — excluding the battery system. That is compact for 100 kVA, but access and the floor must be checked before ordering.
Is the APC E3MUPS100KHS new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document. It delivers a sine wave with output distortion below 3%, and its noise level of 65 dBA confines it to a dedicated electrical room.
Network management card already fitted, with environmental monitoring: it is administered and raises alerts remotely. 9 minutes of runtime at 50% load (10 kW), extendable with battery packs.
•Runtime: 9 min at 50% load (10 kW), 5 min at 70% (14 kW)
•An external battery pack is included; runtime remains extendable
•Network Management Card 3 pre-installed, with environmental monitoring
Fifteen minutes of runtime at full load, internal batteries included. Dust filter and conformal-coated boards: it is made for demanding premises, on a three-phase 400 V input tolerated from 304 to 477 V.
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
•4 C19 outlets, heavy-duty 16 A, also battery-backed
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
16 kW genuinely available and around 14 minutes of runtime at half load, extendable with up to four battery cabinets. Terminal block input and output, for hard-wired infrastructure.
•16 kW usable output
•Around 14 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
A free-standing tower on castors, with an LCD screen showing the load, the battery status and the voltages. Around 16 minutes of runtime at half load, extendable with up to four battery cabinets.
•Around 16 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
Three reinforced 16 A outlets for power-hungry hardware, eight server outlets, and batteries that are changed without cutting the power. Under 40 dB at one metre, in a rack as in a tower.
•8 C13 outlets: the format of computer and server power cords
All the power available in watts: 10,000 W usable, as many as the VA. Around 7 minutes of runtime at half load (5000 W) to shut down a full rack cleanly, in only 4U.
For a whole infrastructure: 9 minutes of runtime at half load (5000 W) and 5 minutes at 70%, the time it takes to switch over to a generator. 94% efficiency at full load and internal bypass.
A maintenance bypass supplied as standard allows the UPS to be replaced without shutting down the equipment it powers. Around 15 minutes of runtime at half load (4 000 W), extendable with four battery cabinets.
•Around 15 minutes of runtime at half load (4 000 W)
•Runtime extendable with one to four external battery cabinets
•Internal batteries included: 2 strings of 7 Ah, expandable to 3 for more runtime
•Three-phase 400 V input and output, also 380 or 415 V
In stock
92 399 DHincl. VAT92 399,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
In stock
65 999 DHincl. VAT65 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
In stock
51 199 DHincl. VAT51 199,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
49 999 DHincl. VAT49 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Internal bypass and maintenance bypass as standard
In stock
41 999 DHincl. VAT41 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•3 C19 outlets: reinforced 16 A outlets for power-hungry equipment
•Terminal block input: fixed wiring, to be installed by an electrician
Doubling the runtime comes down to one extra battery cabinet: 9 minutes at half load become 23 minutes. The 16 12 V batteries are chosen and ordered separately.
•Runtime with the 16 internal batteries: 9 min at 50% load, 23 min at 25%
•With an additional battery cabinet: 23 min at 50% load, 60 min at 25%
•Batteries to be ordered separately: 16 12 V batteries of 7 or 9 Ah
Nineteen minutes of runtime at half load, extended to fifty with an additional battery cabinet. The 16 12 V batteries are chosen and ordered separately.
A maintenance bypass supplied as standard allows the UPS to be replaced without shutting down the equipment it powers. Around 15 minutes of runtime at half load (4 000 W), extendable with four battery cabinets.
•Around 15 minutes of runtime at half load (4 000 W)
16 kW genuinely available and around 14 minutes of runtime at half load, extendable with up to four battery cabinets. Terminal block input and output, for hard-wired infrastructure.
•16 kW usable output
•Around 14 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
A free-standing tower on castors, with an LCD screen showing the load, the battery status and the voltages. Around 16 minutes of runtime at half load, extendable with up to four battery cabinets.
For a whole infrastructure: 9 minutes of runtime at half load (5000 W) and 5 minutes at 70%, the time it takes to switch over to a generator. 94% efficiency at full load and internal bypass.
Fifteen minutes of runtime at full load, internal batteries included. Dust filter and conformal-coated boards: it is made for demanding premises, on a three-phase 400 V input tolerated from 304 to 477 V.
Network management card already fitted, with environmental monitoring: it is administered and raises alerts remotely. 9 minutes of runtime at 50% load (10 kW), extendable with battery packs.
•Runtime: 9 min at 50% load (10 kW), 5 min at 70% (14 kW)
Floor-standing, 68.5 cm high and 54 kg: the tower version, for when there is no rack. Around 11 minutes of runtime at half load (3000 W) and 94% efficiency at full load.
All the power available in watts: 10,000 W usable, as many as the VA. Around 7 minutes of runtime at half load (5000 W) to shut down a full rack cleanly, in only 4U.
