APC E3MUPS60KHBS Uninterruptible Power Supply Double-Conversion (Online) 60 kVA 60000 W (E3MUPS60KHBS)
Supplied without batteries, to be fitted to suit the runtime required: this three-phase 400 V UPS is aimed at small and medium-sized data centres. Touchscreen, built-in static bypass and 5x8 commissioning service included.
Supplied without batteries: runtime to be built to suit requirements
Designed for internal batteries
Three-phase input and output 400 V, 380 and 415 V also accepted
LCD touchscreen
Built-in static bypass
Overload capability: 10 minutes at 125%, 60 seconds at 150%
Input voltage tolerance from 342 to 477 V
Mains frequency accepted from 40 to 70 Hz
Remote monitoring and management compatible with EcoStruxure
The APC E3MUPS60KHBS uninterruptible power supply offers total reliability with its double-conversion (online) topology, for efficient power conversion. Ideal for critical environments, it delivers an impressive 60 kVA (60,000 W) with a stable sine waveform. Its sealed lead-acid (VRLA) battery technology ensures lasting performance. In a white tower format, it features an LCD display for easy management. Perfect for keeping your operations running, with advanced surge protection and built-in audible alarms.
- Double-conversion (online) - 60 kVA 60,000 W - Waveform: Sine - Sealed Lead Acid (VRLA) 240 V - White tower
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
Are batteries supplied with the E3MUPS60KHBS?
No: the UPS is supplied without batteries, precisely so that you can build the runtime you need. It is designed for internal batteries, to be chosen according to the number of minutes required.
How is the E3MUPS60KHBS connected to the electrical installation?
Through fixed wiring to a 5-wire terminal block — three phases, neutral and earth — at 400 V three-phase, with 380 and 415 V also accepted. It is an electrician's installation, to be prepared before commissioning.
How much current does the E3MUPS60KHBS draw per phase?
104 A maximum per phase, with a short-circuit withstand of 10 kA. These are the two figures to give the electrician to size the upstream protection and the cable cross-section.
How does the E3MUPS60KHBS handle an overload?
10 minutes at 125% of its power and 60 seconds at 150%. This reserve absorbs the inrush current when a rack starts up without transferring the installation to bypass.
Does power still flow if the E3MUPS60KHBS is shut down?
Yes, a built-in static bypass transfers the load to the mains without interruption — during a prolonged overload as well as for servicing. That is what allows the UPS to be maintained without shutting down the room.
How is the E3MUPS60KHBS monitored remotely?
It is EcoStruxure-compatible: monitoring and management are carried out remotely from the cloud, in addition to the touchscreen on the front panel, which shows the status of the installation at a glance.
What kind of room does the E3MUPS60KHBS need?
A ventilated technical room: it dissipates 10,523 BTU/h and its noise level reaches 65 dBA. The cabinet measures 197 cm high, 60 wide and 100 deep and weighs 311 kg — access and floor must be checked.
Does the E3MUPS60KHBS disturb the upstream grid?
Very little: its input power factor reaches 0.99 and harmonic distortion stays below 3% at full load. It also accepts a mains frequency of 40 to 70 Hz and a voltage of 342 to 477 V.
Is the APC Easy UPS 3M E3MUPS60KHBS new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, with a start-up service included. A dust filter and the installation guide are also supplied. The datasheet covers the rest.
Network management card already fitted, with environmental monitoring: it is administered and raises alerts remotely. 9 minutes of runtime at 50% load (10 kW), extendable with battery packs.
•Runtime: 9 min at 50% load (10 kW), 5 min at 70% (14 kW)
•An external battery pack is included; runtime remains extendable
•Network Management Card 3 pre-installed, with environmental monitoring
Fifteen minutes of runtime at full load, internal batteries included. Dust filter and conformal-coated boards: it is made for demanding premises, on a three-phase 400 V input tolerated from 304 to 477 V.
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
•4 C19 outlets, heavy-duty 16 A, also battery-backed
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
16 kW genuinely available and around 14 minutes of runtime at half load, extendable with up to four battery cabinets. Terminal block input and output, for hard-wired infrastructure.
•16 kW usable output
•Around 14 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
A free-standing tower on castors, with an LCD screen showing the load, the battery status and the voltages. Around 16 minutes of runtime at half load, extendable with up to four battery cabinets.
•Around 16 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
Three reinforced 16 A outlets for power-hungry hardware, eight server outlets, and batteries that are changed without cutting the power. Under 40 dB at one metre, in a rack as in a tower.
•8 C13 outlets: the format of computer and server power cords
All the power available in watts: 10,000 W usable, as many as the VA. Around 7 minutes of runtime at half load (5000 W) to shut down a full rack cleanly, in only 4U.
For a whole infrastructure: 9 minutes of runtime at half load (5000 W) and 5 minutes at 70%, the time it takes to switch over to a generator. 94% efficiency at full load and internal bypass.
A maintenance bypass supplied as standard allows the UPS to be replaced without shutting down the equipment it powers. Around 15 minutes of runtime at half load (4 000 W), extendable with four battery cabinets.
•Around 15 minutes of runtime at half load (4 000 W)
•Runtime extendable with one to four external battery cabinets
•Internal batteries included: 2 strings of 7 Ah, expandable to 3 for more runtime
•Three-phase 400 V input and output, also 380 or 415 V
In stock
92 399 DHincl. VAT92 399,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
In stock
65 999 DHincl. VAT65 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
In stock
51 199 DHincl. VAT51 199,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
49 999 DHincl. VAT49 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Internal bypass and maintenance bypass as standard
In stock
41 999 DHincl. VAT41 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•3 C19 outlets: reinforced 16 A outlets for power-hungry equipment
•Terminal block input: fixed wiring, to be installed by an electrician
Doubling the runtime comes down to one extra battery cabinet: 9 minutes at half load become 23 minutes. The 16 12 V batteries are chosen and ordered separately.
•Runtime with the 16 internal batteries: 9 min at 50% load, 23 min at 25%
•With an additional battery cabinet: 23 min at 50% load, 60 min at 25%
•Batteries to be ordered separately: 16 12 V batteries of 7 or 9 Ah
Nineteen minutes of runtime at half load, extended to fifty with an additional battery cabinet. The 16 12 V batteries are chosen and ordered separately.
A maintenance bypass supplied as standard allows the UPS to be replaced without shutting down the equipment it powers. Around 15 minutes of runtime at half load (4 000 W), extendable with four battery cabinets.
•Around 15 minutes of runtime at half load (4 000 W)
16 kW genuinely available and around 14 minutes of runtime at half load, extendable with up to four battery cabinets. Terminal block input and output, for hard-wired infrastructure.
•16 kW usable output
•Around 14 minutes of runtime at half load
•Runtime extendable with one to four external battery cabinets
A free-standing tower on castors, with an LCD screen showing the load, the battery status and the voltages. Around 16 minutes of runtime at half load, extendable with up to four battery cabinets.
For a whole infrastructure: 9 minutes of runtime at half load (5000 W) and 5 minutes at 70%, the time it takes to switch over to a generator. 94% efficiency at full load and internal bypass.
Fifteen minutes of runtime at full load, internal batteries included. Dust filter and conformal-coated boards: it is made for demanding premises, on a three-phase 400 V input tolerated from 304 to 477 V.
Network management card already fitted, with environmental monitoring: it is administered and raises alerts remotely. 9 minutes of runtime at 50% load (10 kW), extendable with battery packs.
•Runtime: 9 min at 50% load (10 kW), 5 min at 70% (14 kW)
Floor-standing, 68.5 cm high and 54 kg: the tower version, for when there is no rack. Around 11 minutes of runtime at half load (3000 W) and 94% efficiency at full load.
All the power available in watts: 10,000 W usable, as many as the VA. Around 7 minutes of runtime at half load (5000 W) to shut down a full rack cleanly, in only 4U.
