Skip to main content

Welcome to the new iris.ma

We rebuilt everything for you

Same team, same standards

Pay nowView my order
iris.ma — The Tech ExpertBack to school
Menu
Visit the Eaton store

Eaton 9PX 11000i Online UPS (9PX11KIBP31)

Three-phase 400 V input and single-phase output: 10 kW usable, around 13 minutes of runtime at 50% load (5,000 W). The external maintenance bypass allows the UPS to be changed without cutting power to the servers.

  • Usable power of 10 kW (0.9 power factor)
  • Runtime of around 13 minutes at 50% load (5,000 W), 9 minutes at 70% (7,000 W)
  • Three-phase 380/400/415 V input, single-phase output
  • 4 C19 outlets, reinforced 16 A for power-hungry equipment
  • Output also available on a terminal block
  • External maintenance bypass included
  • Runtime extendable with external battery cabinets, detected automatically
  • USB port and RS-232 serial port for automatic server shutdown
  • Slot for an SNMP network card, remote monitoring
  • DB15 connector to run two UPS units in parallel
  • Multilingual graphic LCD display
  • Sine wave output
  • Efficiency up to 95%, 98% in high-efficiency mode
  • Noise level below 50 dB
Ref.: 9PX11KIBP31
Eaton 9PX 11000i Online UPS (9PX11KIBP31) — image 1
Eaton 9PX 11000i Online UPS (9PX11KIBP31) — image 2
Eaton 9PX 11000i Online UPS (9PX11KIBP31) — image 3
Eaton 9PX 11000i Online UPS (9PX11KIBP31) — image 4

Non-contractual photos

The visuals on this page are supplied by the manufacturer. They are frequently produced for a whole range — not for the exact model you are viewing: what you see in the photo is never a promise of what is included.

No exchange, return or cancellation will be accepted on the grounds that something seen in a photo (accessory, port, colour, keyboard layout, packaging…) is not found on the delivered product. Only the specifications written on the page are binding for the order.

What the image does not guarantee:

  • Outlets : the number and type of outlets (Schuko, IEC) vary between versions of a single photographed series.
  • Options : LCD display, USB or RJ45 port, SNMP network card and rack kit are supplied only if the specifications say so.
  • Batteries : the additional battery modules photographed next to the UPS are sold separately.
  • Runtime : it depends on the load actually plugged in, never on what the image shows.
  • Colour : one image often serves several colours, and the shade you see depends on studio lighting as much as on your screen settings; the colour sold is the one in the title and the specifications.
  • Props and accessories : the items shown around the product (cables, stands, decorative objects, content displayed on screen) are not included unless explicitly stated.
  • Packaging : boxes, labels and bundles change with the manufacturer's revisions: the packaging delivered may differ from the one in the photo.

What is binding: the product title, this page's technical specifications, the description and, when provided, the manufacturer's PDF datasheet available in the downloads.

The slightest doubt about a specification? Contact us before ordering and we will check for you.

(+212) 05 30 31 64 21+212 6 64 10 46 24service.client@iris.ma

See our terms and conditions of sale.

1/4
73 599,00 DHincl. VAT

Out of stock

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Can’t wait?

Ask for an alternative on WhatsApp

Quick reply

Manufacturer's datasheetView the PDF · 140 Ko — downloadable

Product overview

A high-end, high-power online UPS for critical infrastructure: online double conversion, 11 kVA / 10 kW.
Technology & protection: power is fully and continuously regenerated — the equipment is never exposed to the mains, with zero transfer time. Maximum protection against outages, surges, voltage fluctuations and electrical noise.
Power: 11 kVA for 10 kW of real power (0.9 power factor) — almost all of the rated power is available in watts.
Runtime can be extended with external battery cabinets.
Ports: 4 heavy-duty C19 outlets + terminal block; three-phase input connection. USB port, serial port and slot for an SNMP network card.
Active cooling (≈ 50 dB), to be installed in a technical room.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Designed, for example, for server racks, data centres or network equipment.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.

See all the specifications ↓
Request a quoteShare:

Technical specifications

Technical specifications
Output voltage200/208/220/230/240/250V +/– 1%
Waveform typeSine wave
Output harmonic distortion< 2% (THDU)
Output connectionsTerminal block + 4 IEC C19 outlets (16 A)
Input voltage380/400/415 V three-phase
Input frequency50/60 Hz auto-selecting (40 - 70 Hz)
Input connectionsTerminal block (up to 16 mm²)
Voltage range305 - 480 V without derating (175 - 480 V with derating)
Battery managementABM® or temperature-compensated charging method (user-selectable), automatic battery test, deep discharge protection, external battery pack detection
Interface port1 USB port, 1 RS232 port (cannot be used simultaneously), 4 dry contacts (DB9), 1 remote on/off control mini terminal block, 1 emergency power off, 1 DB15 paralleling connector
User interfaceMultilingual graphic LCD screen
Audible alarmYes
Power management softwareEaton Intelligent Power
Weight (kg)88 kg
Dimensions (W x D x H) (mm)440 x 700 x 260 mm
TechnologyOn-line
Power (VA)11,000 VA
Voltage stabiliserYes
Communication card slot1 slot for Network-MS, ModBus-MS or Relay-MS card (optional)
Technical specifications (continued)
Rack height6U
Transfer/switching time0 ms (continuous double conversion)
BypassInternal bypass + HotSwap MBP maintenance bypass as standard
Audible noise< 50 dBA
Power factor (ratio)0.9
Input power factorInput power factor correction (PFC), ratio not published by the manufacturer
Output frequency50/60 Hz auto-selecting, frequency converter as standard
Phase (output/input)Single-phase / Three-phase
Eco mode efficiency98% in high-efficiency mode
Overload capacity102-110%: 120 s; 110-125%: 60 s; 125-150%: 10 s; > 150%: 900 ms
Double-conversion efficiencyUp to 95% in online mode
Output typeTerminal block
Power (W)10,000 W
Runtime13 min at 50% load; 9 min at 70% (at 0.7 power factor)
External battery packsUp to 12 hot-pluggable external battery modules (EBM 9PXEBM240)
Form factorConvertible rack/tower
Battery-backed outlets3 to 4 outlets
Control & communicationUSB, RS232 serial port, Card slot
Warranty1 year

Specific references

EAN743172040305

Downloads

Customer reviews

No reviews yet

Be the first to review this product and help other customers.

Write a review
Your rating
5/5

Shown publicly with your review.

Never published — a confirmation email will be sent to you.

Tell us about the product — in a few lines:

  • what you liked in everyday use;
  • the quality and performance you found;
  • who you would recommend it to, and why.

A question about an order, a delivery or a payment? Write to us and we will reply to you directly.

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Frequently asked questions about this product

Does the 9PX 11000i require a three-phase supply?
Yes: the input is three-phase at 380, 400 or 415 V, while the output remains single-phase. The accepted range is 305 to 480 V without derating, and up to 175-480 V with derating of power.
How long does the 9PX 11000i last on battery?
13 minutes at 50% load, i.e. 5000 W, and 9 minutes at 70%, i.e. 7000 W. Runtime can be extended with automatically detected external battery modules.
Is the maintenance bypass supplied with the 9PX 11000i?
Yes, an external maintenance bypass is supplied with the unit: it lets you remove the UPS for servicing or replacement without cutting power to the servers.
Does this 11 kVA unit deliver 10 kW of usable power?
Yes, thanks to a 0.9 power factor: 11,000 × 0.9 = 10,000 W. The 9PX also has built-in input power factor correction, which limits the harmonics sent back onto the three-phase grid.
Can two 9PX 11000i units be run in parallel?
Yes: a DB15 connector is provided for paralleling two UPSs, which lets you either double the power or build redundancy into critical infrastructure.
What efficiency does the 9PX 11000i reach?
Up to 95%, and 98% in high-efficiency mode. On a 10 kW machine running around the clock, every point of efficiency means around a hundred watts less heat to remove.
What outputs does the 9PX 11000i offer?
Four heavy-duty 16 A C19 outlets, plus a terminal block output for fixed wiring. The output voltage can be set to 200, 208, 220, 230, 240 or 250 V, within ±1%.
Is the Eaton 9PX 11000i (9PX11KIBP31) new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document. It weighs 88 kg, stays below 50 dBA, delivers a sine wave and shows its status on a multilingual graphic LCD screen. The datasheet covers the rest.

Trending

View the Eaton archive

Estimate the delivery time for your city:

Chat on WhatsApp

Scan with my phone

The simplest way: open your phone camera and point it at this code. The chat opens with your message ready.

Open WhatsApp Web

Works if your phone is already linked to this computer.

Prefer to call? (+212) 05 30 31 64 21