Skip to main content

Welcome to the new iris.ma

We rebuilt everything for you

Same team, same standards

Pay nowView my order
iris.ma — The Tech ExpertBack to school
Menu
Visit the APC store

APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS

Output entirely wired to a terminal block, to be fitted by an electrician: 4,500 W usable, a Web/SNMP network management card included and a full recharge in 1 h 30. Rack-mounting rails included.

  • 4,500 W usable output
  • Terminal block output only: fixed wiring, to be installed by an electrician
  • 208 V or 230 V input, accepted voltage from 160 to 275 V
  • Web/SNMP management card included to monitor the UPS remotely
  • USB, RJ-45 serial, RJ-45 network ports and SmartSlot
  • Multifunction LCD status and control console
  • Full recharge in 1 h 30
  • Rack-mounting kit and rails included
  • Temperature probe included
  • Sine wave output
  • Maintenance-free sealed lead-acid battery, replaceable (APCRBC140)
  • 56 kg
Ref.: SRT5KRMXLW-HW
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS — image 1
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS — image 2
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS — image 3
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS — image 4
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS — image 5
APC Smart-UPS SRT 5000VA RM 208/230V HW Double-Conversion Online UPS — image 6

Non-contractual photos

The visuals on this page are supplied by the manufacturer. They are frequently produced for a whole range — not for the exact model you are viewing: what you see in the photo is never a promise of what is included.

No exchange, return or cancellation will be accepted on the grounds that something seen in a photo (accessory, port, colour, keyboard layout, packaging…) is not found on the delivered product. Only the specifications written on the page are binding for the order.

What the image does not guarantee:

  • Outlets : the number and type of outlets (Schuko, IEC) vary between versions of a single photographed series.
  • Options : LCD display, USB or RJ45 port, SNMP network card and rack kit are supplied only if the specifications say so.
  • Batteries : the additional battery modules photographed next to the UPS are sold separately.
  • Runtime : it depends on the load actually plugged in, never on what the image shows.
  • Colour : one image often serves several colours, and the shade you see depends on studio lighting as much as on your screen settings; the colour sold is the one in the title and the specifications.
  • Props and accessories : the items shown around the product (cables, stands, decorative objects, content displayed on screen) are not included unless explicitly stated.
  • Packaging : boxes, labels and bundles change with the manufacturer's revisions: the packaging delivered may differ from the one in the photo.

What is binding: the product title, this page's technical specifications, the description and, when provided, the manufacturer's PDF datasheet available in the downloads.

The slightest doubt about a specification? Contact us before ordering and we will check for you.

(+212) 05 30 31 64 21+212 6 64 10 46 24service.client@iris.ma

See our terms and conditions of sale.

1/6
68 899,00 DHincl. VAT

Out of stock

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Can’t wait?

Ask for an alternative on WhatsApp

Quick reply

Product overview

Online double-conversion UPS, 4500 W / 5000 VA, RM 208/230V HW - Output connections: (1) hardwire, 3-wire (2PH + G), (1) hardwire, 3-wire (H N + G) - Nominal input voltage: 208V, 230V - Input frequency: 40 - 70 Hz (auto-sensing) - Input connection type: hardwire, 3-wire (2PH + G), hardwire, 3-wire (1PH+N+G) - Weight 56 kg

See all the specifications ↓
Request a quoteShare:

Technical specifications

Technical specifications
Output voltage208V, 230V
Waveform typeSine wave
Output connections(1) Hard Wire 3-wire (2PH + G), (1) Hard Wire 3-wire (H N + G)
Input voltage208V, 230V
Input frequency40 - 70 Hz (auto-sensing)
Input connectionsHard Wire 3-wire (2PH + G), Hard Wire 3 wire (1PH+N+G)
Voltage range160 - 275V
Battery typeSealed maintenance-free lead-acid battery with suspended electrolyte: leakproof (internal battery 2 years)
Typical recharge time1.50 hours
Interface portContact closure, RJ-45 10/100 Base-T, RJ-45 serial, SmartSlot, USB
User interfaceMultifunction LCD status and control console
Audible alarmAudible and visual alarms according to severity level
Technical specifications (continued)
Weight (kg)56 kg
Dimensions (W x D x H) (mm)432 x 719 x 130 mm
TechnologyOn-line
Power (VA)5,000 VA
Voltage stabiliserYes
Box contentsSoftware CD, Documentation CD, Installation guide, Rack mounting kit, Rack mounting support rails, Removable feet, Temperature probe, User manual, Warranty card, Web/SNMP management card
Replacement batteryAPCRBC140
Output typeTerminal block
Power (W)4,500 W
Form factorConvertible rack/tower
Control & communicationUSB, RS232 serial port, Network (SNMP / monitoring), Card slot
Warranty3 years

Customer reviews

No reviews yet

Be the first to review this product and help other customers.

Write a review
Your rating
5/5

Shown publicly with your review.

Never published — a confirmation email will be sent to you.

Tell us about the product — in a few lines:

  • what you liked in everyday use;
  • the quality and performance you found;
  • who you would recommend it to, and why.

A question about an order, a delivery or a payment? Write to us and we will reply to you directly.

Under Law 09-08, you have the right to access, rectify and object to the processing of your personal data. This processing has been authorised by the CNDP under no. D-CE-389/2015. Learn more

Frequently asked questions about this product

Can the SRT 5000 RM HW be connected to outlets?
No: the output is on a terminal block only, like the input. That is what the “HW” in the model name means — hard wired. The wiring is fixed and must be installed by an electrician, distribution outlets included.
Is the network management card supplied?
Yes, a Web/SNMP management card is in the box, along with a temperature probe, the rack-mount kit and rails, removable feet, the CDs and the manual. There is nothing extra to order to install and monitor it.
How long does it take to recharge the batteries?
1 hour 30 minutes for a full recharge — very fast for this power rating. The sealed lead-acid battery is replaced with part number APCRBC140 and is covered for two years.
What input voltage does the SRT 5000 RM HW accept?
208 V or 230 V depending on the connection, over an accepted range of 160 to 275 V and an automatically detected frequency of 40 to 70 Hz.
Does this 5 kVA UPS deliver 4500 W of usable power?
Yes: 4500 W for 5000 VA, i.e. a power factor of 0.9. It is this wattage figure that you need to compare with the combined consumption of the rack, never the apparent power.
How much space does the SRT 5000 RM HW take up?
432 × 719 × 130 mm for 56 kg, in a convertible rack/tower chassis. The 72 cm depth rules out short cabinets, and the weight means rack mounting takes several people.
How do you monitor the SRT 5000 RM HW?
Via an RJ-45 10/100 Base-T port, an RJ-45 serial port, a USB port, a contact closure and a SmartSlot. A multifunction LCD console shows the status on the front panel.
Is the APC Smart-UPS SRT 5000 RM HW new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for 3 years. It delivers a sine wave output and reports faults through audible and visual alarms graded by severity.

Trending

View the APC archive

Estimate the delivery time for your city:

Chat on WhatsApp

Scan with my phone

The simplest way: open your phone camera and point it at this code. The chat opens with your message ready.

Open WhatsApp Web

Works if your phone is already linked to this computer.

Prefer to call? (+212) 05 30 31 64 21