Skip to main content

Pay now View my order

UPS & Power

· 257 references

In stock only(96)

Line Interactive(132)
On-line(94)
Off-line(19)

Not specified(12)

Tower(147)
Convertible rack/tower(50)
Rack(42)

Not specified(18)

257 ref.references

Sort by

Image 1 of 5
APC
Product reference:SRT6KXLI
APC Smart-UPS SRT 6000VA Online UPS (SRT6KXLI)
Product reference:SRT6KXLI
6,000 W usable output (power factor of 1)
Around 8 minutes of runtime at 50% load (3,000 W), 5 minutes at 70% (4,200 W)
6 C13 outlets, the format used by computer and server power cords, all battery-backed
4 C19 outlets, heavy-duty 16 A, also battery-backed
Terminal block output also backed by the battery
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Internal bypass, automatic and manual
Full recharge in 1 h 30
Multifunction LCD status and control console
Temperature probe included
Emergency power off switch
Sine wave output
55 dB noise level, to be installed in a technical room
174 mm wide, 60 kg
Around 8 minutes of runtime at half load (3,000 W) and 6,000 W genuinely available, with no loss from the power factor. Full recharge in 1 h 30, in a chassis only 17 cm wide.
Around 8 minutes of runtime at half load (3,000 W) and 6,000 W genuinely available, with no loss from the power factor. Full recharge in 1 h 30, in a chassis only 17 cm wide.
6,000 W usable output (power factor of 1)
Around 8 minutes of runtime at 50% load (3,000 W), 5 minutes at 70% (4,200 W)
6 C13 outlets, the format used by computer and server power cords, all battery-backed
4 C19 outlets, heavy-duty 16 A, also battery-backed
Terminal block output also backed by the battery
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Internal bypass, automatic and manual
Full recharge in 1 h 30
Multifunction LCD status and control console
Temperature probe included
Emergency power off switch
Sine wave output
55 dB noise level, to be installed in a technical room
174 mm wide, 60 kg
A high-power online UPS for critical infrastructure: online double conversion, 6000 VA / 6000 W.
Technology & protection: power is constantly rebuilt — the equipment receives flawless power without ever touching the mains, with zero transfer time. Maximum protection against outages, surges, voltage fluctuations and electrical noise.
Power: 6000 VA for 6000 W of real power (power factor of 1) — all of the rated power is available in watts.
Outlets: 6 C13 outlets + 4 heavy-duty C19 outlets + terminal block connection.
Active cooling (≈ 55 dB), to be installed in a technical room.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Designed, for example, for server racks, data centres and critical infrastructure.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
76 599 DHincl. VAT
Availability alert
APC Smart-UPS SRT 6000VA Online UPS (SRT6KXLI)
Datasheet (PDF)
Price: 76 599,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT 6000VA Online UPS (SRT6KXLI)
Warranty
3 years
Image 1 of 4
APC
Product reference:SRT10KXLI
APC Smart-UPS SRT 10000VA Online UPS (SRT10KXLI)
Product reference:SRT10KXLI
10 kW usable output (power factor of 1)
6 C13 outlets, the format used by computer and server power cords, all battery-backed
4 C19 outlets, heavy-duty 16 A, also battery-backed
Terminal block output also backed by the battery
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Internal bypass, automatic and manual
Full recharge in 1 h 30
Multifunction LCD status and control console
Temperature probe included
Emergency power off switch
Single-phase 230 V or three-phase 400 V input depending on the installation
Sine wave output
55 dB noise level, to be installed in a technical room
As many watts as kVA: all 10 kW are usable, with no loss from the power factor. Ten outlets, all battery-backed, and the Web/SNMP management card included.
As many watts as kVA: all 10 kW are usable, with no loss from the power factor. Ten outlets, all battery-backed, and the Web/SNMP management card included.
10 kW usable output (power factor of 1)
6 C13 outlets, the format used by computer and server power cords, all battery-backed
4 C19 outlets, heavy-duty 16 A, also battery-backed
Terminal block output also backed by the battery
Web/SNMP management card included to monitor the UPS remotely
USB, RJ-45 serial, RJ-45 network ports and SmartSlot
Internal bypass, automatic and manual
Full recharge in 1 h 30
Multifunction LCD status and control console
Temperature probe included
Emergency power off switch
Single-phase 230 V or three-phase 400 V input depending on the installation
Sine wave output
55 dB noise level, to be installed in a technical room
A high-power online UPS for critical infrastructure: online double conversion, 10 kW / 10 kVA.
Technology & protection: power is constantly rebuilt — the equipment receives flawless power without ever touching the mains, with zero transfer time. Maximum protection against outages, surges, voltage fluctuations and electrical noise.
Power: 10 kVA for 10 kW of real power (power factor of 1) — all of the rated power is available in watts, enough for a full server rack.
Outlets: 6 C13 outlets + 4 heavy-duty C19 outlets + terminal block connection.
Pure sine wave output; active cooling (≈ 55 dB), to be installed in a technical room.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Designed, for example, for server racks, data centres and critical infrastructure.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 3 years
107 699 DHincl. VAT
Availability alert
APC Smart-UPS SRT 10000VA Online UPS (SRT10KXLI)
Datasheet (PDF)
Price: 107 699,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS SRT 10000VA Online UPS (SRT10KXLI)
Warranty
3 years
Image 1 of 6
Eaton
Product reference:EL650USBFR
Eaton Ellipse ECO EL650USBFR Off-Line UPS - 400 W / 650 VA - 4 FR outlets
Product reference:EL650USBFR
Runtime 9 minutes at 50% load (200 W), 6 minutes at 70% (280 W)
3 battery-backed outlets and 1 surge-protected outlet
USB port with cable included and Eaton software: automatic shutdown, alerts, history
EcoControl: automatic power-off for peripherals on standby
Built-in surge protection compliant with IEC 61643-1
Protection for telephone, modem, Internet and Ethernet lines
Replaceable sealed lead-acid battery, with periodic self-test
Cold start possible with no mains supply
Resettable circuit breaker after overload or short circuit
Extra-flat 81 mm housing, vertical or horizontal placement
Operation below 25 dBA
Weight 3.6 kg
Nine minutes of runtime at half load, and the USB port lets the Eaton software switch the PC off if the outage lasts. Three outlets out of four battery-backed, the fourth against surges.
Nine minutes of runtime at half load, and the USB port lets the Eaton software switch the PC off if the outage lasts. Three outlets out of four battery-backed, the fourth against surges.
Runtime 9 minutes at 50% load (200 W), 6 minutes at 70% (280 W)
3 battery-backed outlets and 1 surge-protected outlet
USB port with cable included and Eaton software: automatic shutdown, alerts, history
EcoControl: automatic power-off for peripherals on standby
Built-in surge protection compliant with IEC 61643-1
Protection for telephone, modem, Internet and Ethernet lines
Replaceable sealed lead-acid battery, with periodic self-test
Cold start possible with no mains supply
Resettable circuit breaker after overload or short circuit
Extra-flat 81 mm housing, vertical or horizontal placement
Operation below 25 dBA
Weight 3.6 kg
Compact entry-level UPS to protect a computer workstation: off-line technology and 650 VA / 400 W.
Technology & protection: when the power fails, it switches to battery within a few milliseconds and protects against surges.
Power: 650 VA for 400 W of usable power — a PC and its monitor.
Runtime: approx. 9 minutes at half load (200 W).
Outlets: 4 French outlets — 3 with battery backup, 1 with surge protection only — no adapter needed.
Management: USB port for automatic PC shutdown. Very quiet operation (below 25 dB).
Ideal, for example, for a desktop computer, an internet box or a camera.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
No longer sold Warranty 2 years
1 299 DHincl. VAT
Datasheet (PDF)
Price: 1 299,00 DH incl. VAT
No longer sold
Warranty
2 years
Image 1 of 5
Eaton
Product reference:5P1150IR
5P 1150 VA Line-Interactive UPS - RACK 1U (5P1150IR)
Product reference:5P1150IR
770 W genuinely usable
Runtime around 12 minutes at half load (7 minutes at 70%)
6 C13 outlets (the format of computer and server power cords)
USB port and RS232 serial port for automatic system shutdown
Slot for an optional SNMP network card
Pure sine wave output
1U rack format — space saving in the cabinet
Hot-swappable batteries, without interrupting the power
Graphic LCD display with consumption metering
Ultra-compact professional UPS with pure sine wave output, for a clean signal even on battery. 1U rack format saving space in the cabinet, hot-swappable batteries.
Ultra-compact professional UPS with pure sine wave output, for a clean signal even on battery. 1U rack format saving space in the cabinet, hot-swappable batteries.
770 W genuinely usable
Runtime around 12 minutes at half load (7 minutes at 70%)
6 C13 outlets (the format of computer and server power cords)
USB port and RS232 serial port for automatic system shutdown
Slot for an optional SNMP network card
Pure sine wave output
1U rack format — space saving in the cabinet
Hot-swappable batteries, without interrupting the power
Graphic LCD display with consumption metering
Ultra-compact professional UPS for a server rack: line-interactive with voltage regulation, 1150 VA / 770 W, in a 1U rack form factor.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 1150 VA for 770 W of usable output.
Outlets: 6 C13 outlets (for computer and server power cords).
Pure sine wave output; the 1U form factor saves rack space. Quiet operation (below 40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a rack-mounted server, switch or firewall.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
8 399 DHincl. VAT
Availability alert
5P 1150 VA Line-Interactive UPS - RACK 1U (5P1150IR)
Datasheet (PDF)
Price: 8 399,00 DH incl. VAT
Out of stock
Availability alert
5P 1150 VA Line-Interactive UPS - RACK 1U (5P1150IR)
Warranty
3 years
Image 1 of 6
Eaton
Product reference:5E1100IUSB
Eaton 5E 5E1100IUSB Line-Interactive UPS - 660 W / 1100 VA - 6 C13 outlets
Product reference:5E1100IUSB
Runtime around 11 minutes at half load
USB port for automatic PC shutdown (Eaton UPS Companion software)
Also protects the data line (telephone/internet) against surges
Battery on permanent charge, start-up possible without mains
Noise level below 45 dB
2-year warranty
Desktop UPS with automatic voltage regulation, a battery on permanent charge and start-up possible even with no mains supply. Designed for a workstation and its peripherals.
Desktop UPS with automatic voltage regulation, a battery on permanent charge and start-up possible even with no mains supply. Designed for a workstation and its peripherals.
Runtime around 11 minutes at half load
USB port for automatic PC shutdown (Eaton UPS Companion software)
Also protects the data line (telephone/internet) against surges
Battery on permanent charge, start-up possible without mains
Noise level below 45 dB
2-year warranty
Desktop UPS to protect a workstation and its peripherals: line-interactive with automatic voltage regulation (AVR) and 1100 VA / 660 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and automatically corrects voltage dips and spikes without drawing on the battery.
Power: 1100 VA for 660 W of usable output — a PC, a monitor and their accessories.
Outlets: 6 C13 outlets (for computer and server power cords).
Management: USB port for automatic PC shutdown. It also protects the data line (RJ-11) against surges — a path lightning can take too.
Ideal, for example, for an office workstation, a small NAS or a switch.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 2 years
1 495 DHincl. VAT
Availability alert
Eaton 5E 5E1100IUSB Line-Interactive UPS - 660 W / 1100 VA - 6 C13 outlets
Datasheet (PDF)
Price: 1 495,00 DH incl. VAT
Out of stock
Availability alert
Eaton 5E 5E1100IUSB Line-Interactive UPS - 660 W / 1100 VA - 6 C13 outlets
Warranty
2 years
Image 1 of 7
Eaton
Product reference:5E850IUSB
Eaton 5E 5E850IUSB Line-Interactive UPS - 480 W / 850 VA - 4 C13 outlets
Product reference:5E850IUSB
Runtime around 5 minutes at half load
USB port for automatic PC shutdown (Eaton UPS Companion software)
Also protects the data line (telephone/internet) against surges
Battery on permanent charge, start-up possible without mains
Quiet operation (below 40 dB)
2-year warranty
Desktop UPS with automatic voltage regulation, a battery on permanent charge and start-up possible even with no mains supply. Quiet operation, designed for a computer workstation.
Desktop UPS with automatic voltage regulation, a battery on permanent charge and start-up possible even with no mains supply. Quiet operation, designed for a computer workstation.
Runtime around 5 minutes at half load
USB port for automatic PC shutdown (Eaton UPS Companion software)
Also protects the data line (telephone/internet) against surges
Battery on permanent charge, start-up possible without mains
Quiet operation (below 40 dB)
2-year warranty
Desktop UPS to protect a computer workstation: line-interactive with automatic voltage regulation (AVR) and 850 VA / 480 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and automatically corrects voltage dips and spikes to deliver stable power.
Power: 850 VA for 480 W of usable output — a PC, a monitor and their accessories.
Outlets: 4 C13 outlets (for computer and server power cords).
Management: USB port for automatic PC shutdown. It also protects the data line (RJ-11) against surges. Quiet operation (below 40 dB).
Ideal, for example, for an office workstation, a small NAS or a switch.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 2 years
1 169 DHincl. VAT
Availability alert
Eaton 5E 5E850IUSB Line-Interactive UPS - 480 W / 850 VA - 4 C13 outlets
Datasheet (PDF)
Price: 1 169,00 DH incl. VAT
Out of stock
Availability alert
Eaton 5E 5E850IUSB Line-Interactive UPS - 480 W / 850 VA - 4 C13 outlets
Warranty
2 years
Image 1 of 2
Eaton
Product reference:5P650I
Eaton 5P 5P650I Line-Interactive UPS - 420 W / 650 VA - 4 C13 outlets
Product reference:5P650I
Compact professional UPS to protect a computer workstation: line-interactive with voltage regulation, 650 VA / 420 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations to deliver stable power.
Power: 650 VA for 420 W of usable output — a PC and its monitor.
Runtime: approx. 9 minutes at half load (6 minutes at 70%).
Outlets: 4 C13 outlets (the standard connector for computer and server power cords).
Pure sine wave output. Quiet operation (below 40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance, for monitoring without any software.
Ideal, for example, for an office workstation, a monitor or a small NAS.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Compact professional UPS to protect a computer workstation: line-interactive with voltage regulation, 650 VA / 420 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations to deliver stable power.
Power: 650 VA for 420 W of usable output — a PC and its monitor.
Runtime: approx. 9 minutes at half load (6 minutes at 70%).
Outlets: 4 C13 outlets (the standard connector for computer and server power cords).
Pure sine wave output. Quiet operation (below 40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance, for monitoring without any software.
Ideal, for example, for an office workstation, a monitor or a small NAS.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
3 599 DHincl. VAT
Availability alert
Eaton 5P 5P650I Line-Interactive UPS - 420 W / 650 VA - 4 C13 outlets
Datasheet (PDF)
Price: 3 599,00 DH incl. VAT
Out of stock
Availability alert
Eaton 5P 5P650I Line-Interactive UPS - 420 W / 650 VA - 4 C13 outlets
Warranty
3 years
Image 1 of 4
Eaton
Product reference:5P850I
Eaton 5P 850i VA Tower Line-Interactive UPS (5P850I)
Product reference:5P850I
Professional tower UPS to protect a workstation: line-interactive with voltage regulation, 850 VA / 600 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 850 VA for 600 W of usable output — a PC, a monitor and their accessories.
Runtime: approx. 12 minutes at half load (7 minutes at 70%).
Outlets: 6 C13 outlets (for computer and server power cords).
Pure sine wave output — the quality of professional Eaton 5P range. Quiet operation (below 40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance, for monitoring without any software.
Ideal, for example, for an office workstation, a small NAS or networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Professional tower UPS to protect a workstation: line-interactive with voltage regulation, 850 VA / 600 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 850 VA for 600 W of usable output — a PC, a monitor and their accessories.
Runtime: approx. 12 minutes at half load (7 minutes at 70%).
Outlets: 6 C13 outlets (for computer and server power cords).
Pure sine wave output — the quality of professional Eaton 5P range. Quiet operation (below 40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance, for monitoring without any software.
Ideal, for example, for an office workstation, a small NAS or networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 1 year
4 579 DHincl. VAT
Availability alert
Eaton 5P 850i VA Tower Line-Interactive UPS (5P850I)
Price: 4 579,00 DH incl. VAT
Out of stock
Availability alert
Eaton 5P 850i VA Tower Line-Interactive UPS (5P850I)
Warranty
1 year
Eaton
Product reference:9SX11KI
Eaton 9SX 11000i Online UPS - RT 6U (9SX11KI)
Product reference:9SX11KI
Type: Online double-conversion power protection
Technology: Online double conversion with PFC (power factor correction)
Power: 10000 W / 11000 VA - Ratio: 0.9
Voltage (output/input): 200/208/220/230/240/250V +/– 1% / 200/208/220/230/240/250V
Frequency (output/input): 50 - 60 Hz / 50 - 60 Hz (auto-sensing)
Output connections: Terminal block
Input connections: Terminal block
Phase (output/input): 1 / 1
Waveform: Sine wave
Audible noise: < 50 dBA
Type: Online double-conversion power protection
Technology: Online double conversion with PFC (power factor correction)
Power: 10000 W / 11000 VA - Ratio: 0.9
Voltage (output/input): 200/208/220/230/240/250V +/– 1% / 200/208/220/230/240/250V
Frequency (output/input): 50 - 60 Hz / 50 - 60 Hz (auto-sensing)
Output connections: Terminal block
Input connections: Terminal block
Phase (output/input): 1 / 1
Waveform: Sine wave
Audible noise: < 50 dBA
Out of stock Warranty 2 years
69 299 DHincl. VAT
Availability alert
Eaton 9SX 11000i Online UPS - RT 6U (9SX11KI)
Datasheet (PDF)
Price: 69 299,00 DH incl. VAT
Out of stock
Availability alert
Eaton 9SX 11000i Online UPS - RT 6U (9SX11KI)
Warranty
2 years
Image 1 of 2
Eaton
Product reference:5P1150I
Eaton 5P 1150 VA Tower Line-Interactive UPS (5P1150I)
Product reference:5P1150I
770 W genuinely usable
Runtime around 12 minutes at half load (7 minutes at 70%)
8 C13 outlets (the format of computer and server power cords)
USB port and RS232 serial port for automatic system shutdown
Slot for an optional SNMP network card
Pure sine wave output
Hot-swappable batteries, without interrupting the power
Graphic LCD display with consumption metering
Quiet operation (below 40 dB)
Professional UPS with automatic voltage regulation and pure sine wave output, for a clean signal even on battery. Hot-swappable batteries, without cutting the power.
Professional UPS with automatic voltage regulation and pure sine wave output, for a clean signal even on battery. Hot-swappable batteries, without cutting the power.
770 W genuinely usable
Runtime around 12 minutes at half load (7 minutes at 70%)
8 C13 outlets (the format of computer and server power cords)
USB port and RS232 serial port for automatic system shutdown
Slot for an optional SNMP network card
Pure sine wave output
Hot-swappable batteries, without interrupting the power
Graphic LCD display with consumption metering
Quiet operation (below 40 dB)
Professional tower UPS to protect a workstation or a small server: line-interactive with voltage regulation, 1150 VA / 770 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 1150 VA for 770 W of usable output.
Runtime: approx. 12 minutes at half load (7 minutes at 70%).
Outlets: 8 C13 outlets (for computer and server power cords).
Pure sine wave output — the quality of professional Eaton 5P range. Quiet operation (below 40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance, for monitoring without any software.
Ideal, for example, for a demanding workstation, a small server or networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
6 369 DHincl. VAT
Availability alert
Eaton 5P 1150 VA Tower Line-Interactive UPS (5P1150I)
Datasheet (PDF)
Price: 6 369,00 DH incl. VAT
Out of stock
Availability alert
Eaton 5P 1150 VA Tower Line-Interactive UPS (5P1150I)
Warranty
3 years
Image 1 of 2
Eaton
Product reference:5P1550I
Eaton 5P 1550I 1550 VA Line-Interactive UPS (5P1550I)
Product reference:5P1550I
1100 W genuinely usable
Runtime around 13 minutes at half load (8 minutes at 70%)
8 C13 outlets (the format of computer and server power cords)
USB port and RS232 serial port for automatic system shutdown
Slot for an optional SNMP network card
Pure sine wave output
Hot-swappable batteries, without interrupting the power
Graphic LCD display with audible alarm
Quiet operation (below 40 dB)
Professional UPS with pure sine wave output and hot-swappable batteries, without cutting the power. Graphic LCD display with an audible alarm.
Professional UPS with pure sine wave output and hot-swappable batteries, without cutting the power. Graphic LCD display with an audible alarm.
1100 W genuinely usable
Runtime around 13 minutes at half load (8 minutes at 70%)
8 C13 outlets (the format of computer and server power cords)
USB port and RS232 serial port for automatic system shutdown
Slot for an optional SNMP network card
Pure sine wave output
Hot-swappable batteries, without interrupting the power
Graphic LCD display with audible alarm
Quiet operation (below 40 dB)
Professional tower UPS to protect a workstation or a small server: line-interactive with voltage regulation, 1550 VA / 1100 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without tapping into the battery.
Power: 1550 VA for 1100 W of usable output.
Runtime: approx. 13 minutes at half load (8 minutes at 70%).
Outlets: 8 C13 outlets (for computer and server power cords).
Pure sine wave output — the quality of professional Eaton 5P range. Quiet operation (below 40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance, for monitoring without any software.
Ideal, for example, for a demanding workstation, a small server or networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
8 899 DHincl. VAT
Availability alert
Eaton 5P 1550I 1550 VA Line-Interactive UPS (5P1550I)
Datasheet (PDF)
Price: 8 899,00 DH incl. VAT
Out of stock
Availability alert
Eaton 5P 1550I 1550 VA Line-Interactive UPS (5P1550I)
Warranty
3 years
Image 1 of 2
Eaton
Product reference:5P1550IR
Eaton 5P 1550i VA Line-Interactive UPS - 1U Rack (5P1550IR)
Product reference:5P1550IR
1100 W genuinely usable
Runtime around 13 minutes at half load (8 minutes at 70%)
6 C13 outlets (the format of computer and server power cords)
USB port and RS232 serial port for automatic system shutdown
Slot for an optional SNMP network card
Pure sine wave output
1U rack format — space saving in the cabinet
Hot-swappable batteries, without interrupting the power
Graphic LCD display with consumption metering
Ultra-compact professional UPS with pure sine wave output, for a clean signal even on battery. 1U rack format saving space in the cabinet, hot-swappable batteries.
Ultra-compact professional UPS with pure sine wave output, for a clean signal even on battery. 1U rack format saving space in the cabinet, hot-swappable batteries.
1100 W genuinely usable
Runtime around 13 minutes at half load (8 minutes at 70%)
6 C13 outlets (the format of computer and server power cords)
USB port and RS232 serial port for automatic system shutdown
Slot for an optional SNMP network card
Pure sine wave output
1U rack format — space saving in the cabinet
Hot-swappable batteries, without interrupting the power
Graphic LCD display with consumption metering
Ultra-compact professional UPS for a server rack: line-interactive with voltage regulation, 1550 VA / 1100 W, in a 1U rack form factor.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 1550 VA for 1100 W of usable output.
Outlets: 6 C13 outlets (for computer and server power cords).
Pure sine wave output; the 1U form factor saves rack space.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a rack-mounted server, switch or firewall.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
9 899 DHincl. VAT
Availability alert
Eaton 5P 1550i VA Line-Interactive UPS - 1U Rack (5P1550IR)
Datasheet (PDF)
Price: 9 899,00 DH incl. VAT
Out of stock
Availability alert
Eaton 5P 1550i VA Line-Interactive UPS - 1U Rack (5P1550IR)
Warranty
3 years
Image 1 of 5
Eaton
Product reference:9SX6KIRT
Eaton 9SX 6000i Online UPS - RT 3U (9SX6KIRT)
Product reference:9SX6KIRT
Usable power of 5,400 W (0.9 power factor)
Runtime of around 11 minutes at 50% load (2,700 W), 8 minutes at 70%
8 C13 outlets, the format of computer and server power cords
2 C19 outlets, reinforced 16 A for power-hungry equipment
Output also available on a terminal block
2 controllable outlet groups: cut the non-essential first
USB port and RS-232 serial port for automatic server shutdown
Slot for an SNMP network card, remote monitoring
Internal bypass: power still flows even if the UPS develops a fault
Hot-swappable batteries from the front panel
Runtime extendable with external battery cabinets, detected automatically
Multilingual graphic LCD display, rotatable for rack or tower
Noise level below 45 dB
Rack mounting kit included
Eight outlets in the server power cord format and two reinforced 16 A outlets, for 5,400 W usable and around 11 minutes of runtime at half load (2,700 W). Enough to close a rack down cleanly.
Eight outlets in the server power cord format and two reinforced 16 A outlets, for 5,400 W usable and around 11 minutes of runtime at half load (2,700 W). Enough to close a rack down cleanly.
Usable power of 5,400 W (0.9 power factor)
Runtime of around 11 minutes at 50% load (2,700 W), 8 minutes at 70%
8 C13 outlets, the format of computer and server power cords
2 C19 outlets, reinforced 16 A for power-hungry equipment
Output also available on a terminal block
2 controllable outlet groups: cut the non-essential first
USB port and RS-232 serial port for automatic server shutdown
Slot for an SNMP network card, remote monitoring
Internal bypass: power still flows even if the UPS develops a fault
Hot-swappable batteries from the front panel
Runtime extendable with external battery cabinets, detected automatically
Multilingual graphic LCD display, rotatable for rack or tower
Noise level below 45 dB
Rack mounting kit included
A high-end online UPS, convertible between rack and tower: online double conversion, 6000 VA / 5400 W, 3U format.
Technology & protection: power is fully and continuously regenerated — your servers are never exposed to the mains, with zero transfer time. Complete protection against outages, surges, voltage fluctuations and electrical noise.
Power: 6000 VA for 5400 W of real power (0.9 power factor) — almost all of the rated power is available in watts.
Runtime: about 11 minutes at half load (2700 W), 8 minutes at 70%.
Ports: 8 C13 outlets + 2 heavy-duty C19 outlets + terminal block.
Active cooling (≈ 45 dB), ideally installed in a technical room.
Designed, for example, for servers, storage or critical network racks.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 2 years
42 199 DHincl. VAT
Availability alert
Eaton 9SX 6000i Online UPS - RT 3U (9SX6KIRT)
Datasheet (PDF)
Price: 42 199,00 DH incl. VAT
Out of stock
Availability alert
Eaton 9SX 6000i Online UPS - RT 3U (9SX6KIRT)
Warranty
2 years
Eaton
Product reference:9SX11KIRT
Eaton 9SX 11000i Online UPS - RT 6U (9SX11KIRT)
Product reference:9SX11KIRT
Usable power of 10 kW (0.9 power factor)
Runtime of around 9 minutes at 50% load, 5 minutes at 70%
Terminal block input and output: fixed wiring, to be installed by an electrician
Built-in bypass: power still flows even if the UPS develops a fault
Hot-swappable batteries from the front panel
Runtime extendable with external battery cabinets, detected automatically
USB port and RS-232 serial port for automatic server shutdown
Slot for an SNMP network card, remote monitoring
Intelligent Power software included, compatible with VMware and Hyper-V
Multilingual graphic LCD display, rotatable for rack or tower
4 dry contacts and remote on/off control
Sine wave output
Efficiency up to 95%, 98% in high-efficiency mode
Noise level below 50 dB
The internal bypass takes over if the UPS develops a fault, and the batteries are changed hot without cutting power to the servers. 10 kW usable, around 9 minutes of runtime at 50% load.
The internal bypass takes over if the UPS develops a fault, and the batteries are changed hot without cutting power to the servers. 10 kW usable, around 9 minutes of runtime at 50% load.
Usable power of 10 kW (0.9 power factor)
Runtime of around 9 minutes at 50% load, 5 minutes at 70%
Terminal block input and output: fixed wiring, to be installed by an electrician
Built-in bypass: power still flows even if the UPS develops a fault
Hot-swappable batteries from the front panel
Runtime extendable with external battery cabinets, detected automatically
USB port and RS-232 serial port for automatic server shutdown
Slot for an SNMP network card, remote monitoring
Intelligent Power software included, compatible with VMware and Hyper-V
Multilingual graphic LCD display, rotatable for rack or tower
4 dry contacts and remote on/off control
Sine wave output
Efficiency up to 95%, 98% in high-efficiency mode
Noise level below 50 dB
A high-end, high-power online UPS for server rooms: online double conversion, 11 kVA / 10 kW, 6U rack format.
Technology & protection: power is fully and continuously regenerated — the equipment is never exposed to the mains, with zero transfer time. Maximum protection against outages, surges, voltage fluctuations and electrical noise.
Power: 11 kVA for 10 kW of real power (0.9 power factor) — almost all of the rated power is available in watts.
Runtime can be extended with external battery cabinets.
Ports: terminal block connection (hard-wired by an electrician); USB and serial ports and slot for an SNMP network card.
Pure sine wave output; active cooling (≈ 50 dB), to be installed in a rack or technical room.
LCD display: shows load, battery level and remaining runtime — so you can monitor the UPS without any software.
Designed, for example, for server racks, network equipment or industrial applications.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 2 years
72 899 DHincl. VAT
Availability alert
Eaton 9SX 11000i Online UPS - RT 6U (9SX11KIRT)
Datasheet (PDF)
Price: 72 899,00 DH incl. VAT
Out of stock
Availability alert
Eaton 9SX 11000i Online UPS - RT 6U (9SX11KIRT)
Warranty
2 years
Image 1 of 4
Eaton
Product reference:9PX11KIBP31
Eaton 9PX 11000i Online UPS (9PX11KIBP31)
Product reference:9PX11KIBP31
Usable power of 10 kW (0.9 power factor)
Runtime of around 13 minutes at 50% load (5,000 W), 9 minutes at 70% (7,000 W)
Three-phase 380/400/415 V input, single-phase output
4 C19 outlets, reinforced 16 A for power-hungry equipment
Output also available on a terminal block
External maintenance bypass included
Runtime extendable with external battery cabinets, detected automatically
USB port and RS-232 serial port for automatic server shutdown
Slot for an SNMP network card, remote monitoring
DB15 connector to run two UPS units in parallel
Multilingual graphic LCD display
Sine wave output
Efficiency up to 95%, 98% in high-efficiency mode
Noise level below 50 dB
Three-phase 400 V input and single-phase output: 10 kW usable, around 13 minutes of runtime at 50% load (5,000 W). The external maintenance bypass allows the UPS to be changed without cutting power to the servers.
Three-phase 400 V input and single-phase output: 10 kW usable, around 13 minutes of runtime at 50% load (5,000 W). The external maintenance bypass allows the UPS to be changed without cutting power to the servers.
Usable power of 10 kW (0.9 power factor)
Runtime of around 13 minutes at 50% load (5,000 W), 9 minutes at 70% (7,000 W)
Three-phase 380/400/415 V input, single-phase output
4 C19 outlets, reinforced 16 A for power-hungry equipment
Output also available on a terminal block
External maintenance bypass included
Runtime extendable with external battery cabinets, detected automatically
USB port and RS-232 serial port for automatic server shutdown
Slot for an SNMP network card, remote monitoring
DB15 connector to run two UPS units in parallel
Multilingual graphic LCD display
Sine wave output
Efficiency up to 95%, 98% in high-efficiency mode
Noise level below 50 dB
A high-end, high-power online UPS for critical infrastructure: online double conversion, 11 kVA / 10 kW.
Technology & protection: power is fully and continuously regenerated — the equipment is never exposed to the mains, with zero transfer time. Maximum protection against outages, surges, voltage fluctuations and electrical noise.
Power: 11 kVA for 10 kW of real power (0.9 power factor) — almost all of the rated power is available in watts.
Runtime can be extended with external battery cabinets.
Ports: 4 heavy-duty C19 outlets + terminal block; three-phase input connection. USB port, serial port and slot for an SNMP network card.
Active cooling (≈ 50 dB), to be installed in a technical room.
LCD display: shows load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Designed, for example, for server racks, data centres or network equipment.
Remember to check how much power your equipment draws and to choose the rating according to the runtime you need.
Out of stock Warranty 1 year
73 599 DHincl. VAT
Availability alert
Eaton 9PX 11000i Online UPS (9PX11KIBP31)
Datasheet (PDF)
Price: 73 599,00 DH incl. VAT
Out of stock
Availability alert
Eaton 9PX 11000i Online UPS (9PX11KIBP31)
Warranty
1 year
Eaton
Product reference:9SX8KI
Eaton 9SX 8kVA Online UPS - RT (9SX8KI)
Product reference:9SX8KI
Usable power of 7,200 W (0.9 power factor)
Battery life of around 15 minutes at 50 % load, 10 minutes at 70 %
Input and output on a terminal block: fixed wiring, to be installed by an electrician
Efficiency up to 95 %, 98 % in high-efficiency mode
Internal bypass: power still flows even if the UPS fails
Hot-swappable batteries accessible from the front panel
Runtime extendable with external battery packs, detected automatically
USB port and RS-232 serial port for automatic server shutdown
Slot for an SNMP network card, remote monitoring
Multilingual graphic LCD display
Input voltage regulation, useful on an unstable mains supply
Sine wave output
Noise level below 48 dB
Up to 95 % efficiency in double conversion and 98 % in high-efficiency mode, for 7,200 W of usable power. Hot-swappable batteries and an internal bypass: maintenance does not cut power to the connected equipment.
Up to 95 % efficiency in double conversion and 98 % in high-efficiency mode, for 7,200 W of usable power. Hot-swappable batteries and an internal bypass: maintenance does not cut power to the connected equipment.
Usable power of 7,200 W (0.9 power factor)
Battery life of around 15 minutes at 50 % load, 10 minutes at 70 %
Input and output on a terminal block: fixed wiring, to be installed by an electrician
Efficiency up to 95 %, 98 % in high-efficiency mode
Internal bypass: power still flows even if the UPS fails
Hot-swappable batteries accessible from the front panel
Runtime extendable with external battery packs, detected automatically
USB port and RS-232 serial port for automatic server shutdown
Slot for an SNMP network card, remote monitoring
Multilingual graphic LCD display
Input voltage regulation, useful on an unstable mains supply
Sine wave output
Noise level below 48 dB
Type: Online double-conversion power protection
Technology: Online double conversion with PFC (power factor correction)
Power: 7200 W / 8000 VA - Ratio: 0.9
Voltage (output/input): 200/208/220/230/240/250V +/– 1% / 200/208/220/230/240/250V
Frequency (output/input): 50 - 60 Hz / 50/60 Hz, auto-sensing
Output connections: Terminal block
Input connections: Terminal block
Phase (output/input): 1 / 1
Waveform: Sine wave
Audible noise: < 48 dBA
Out of stock Warranty 2 years
53 999 DHincl. VAT
Availability alert
Eaton 9SX 8kVA Online UPS - RT (9SX8KI)
Datasheet (PDF)
Price: 53 999,00 DH incl. VAT
Out of stock
Availability alert
Eaton 9SX 8kVA Online UPS - RT (9SX8KI)
Warranty
2 years
Image 1 of 3
APC
Product reference:SMT750I
APC 750VA Smart-UPS Line-Interactive UPS (SMT750I)
Product reference:SMT750I
Usable power 500 W
6 C13 outlets, all battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
Compact tower format
LCD control and status display
Quiet operation (40 dB)
Compact tower format for a workstation or a small server: 500 W usable, 6 C13 outlets all battery-backed. Quiet operation (40 dB).
Compact tower format for a workstation or a small server: 500 W usable, 6 C13 outlets all battery-backed. Quiet operation (40 dB).
Usable power 500 W
6 C13 outlets, all battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
Compact tower format
LCD control and status display
Quiet operation (40 dB)
Compact professional tower UPS: line-interactive with voltage regulation, 750 VA / 500 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 750 VA for 500 W of usable output — a workstation or a small server.
Outlets: 6 C13 outlets, all with battery backup.
Pure sine wave output, ideal for the power supplies of modern computers. Quiet operation (40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a workstation, a small server or networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
6 199 DHincl. VAT
Availability alert
APC 750VA Smart-UPS Line-Interactive UPS (SMT750I)
Datasheet (PDF)
Price: 6 199,00 DH incl. VAT
Out of stock
Availability alert
APC 750VA Smart-UPS Line-Interactive UPS (SMT750I)
Warranty
3 years
Image 1 of 5
APC
Product reference:SMX750I
APC Smart-UPS X SMX750I Line-Interactive UPS - 600 W / 750 VA - 8 C13 outlets - Rack/Tower
Product reference:SMX750I
Power factor 0.86 — almost all the power usable in watts
Runtime around 37 min at half load (300 W), 24 min at 70%
All the outlets battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
LCD control and status display
Quiet operation (40 dB)
High power factor (0.86) and a remarkable runtime of around 37 minutes at half load. All the outlets battery-backed, quiet operation (40 dB).
High power factor (0.86) and a remarkable runtime of around 37 minutes at half load. All the outlets battery-backed, quiet operation (40 dB).
Power factor 0.86 — almost all the power usable in watts
Runtime around 37 min at half load (300 W), 24 min at 70%
All the outlets battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
LCD control and status display
Quiet operation (40 dB)
Professional UPS, convertible between rack and tower: line-interactive with voltage regulation, 750 VA / 600 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 750 VA for 600 W of usable output — its high power factor (0.86) lets you use almost all of its capacity in watts, where a conventional UPS loses a third of it.
Runtime: approx. 37 minutes at half load (300 W), 24 minutes at 70% — outstanding runtime.
Outlets: 8 C13 outlets, all with battery backup.
Quiet operation (40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a small server, network hardware or a workstation.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
10 799 DHincl. VAT
Availability alert
APC Smart-UPS X SMX750I Line-Interactive UPS - 600 W / 750 VA - 8 C13 outlets - Rack/Tower
Datasheet (PDF)
Price: 10 799,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X SMX750I Line-Interactive UPS - 600 W / 750 VA - 8 C13 outlets - Rack/Tower
Warranty
3 years
Image 1 of 2
APC
Product reference:SMT1500I
APC Smart-UPS 1500VA LCD 230V Tower Line-Interactive UPS
Product reference:SMT1500I
1000 W usable — a complete workstation or a small server
Runtime: around 23 minutes at half load (500 W), 12 minutes at 70%
8 C13 outlets (computer and server power cords)
Pure sine wave output
USB port for automatic, clean shutdown
SmartSlot for an optional network/management card
Pure sine wave output, for a demanding workstation or a small server. Comfortable runtime at half load, SmartSlot for an optional network card.
Pure sine wave output, for a demanding workstation or a small server. Comfortable runtime at half load, SmartSlot for an optional network card.
1000 W usable — a complete workstation or a small server
Runtime: around 23 minutes at half load (500 W), 12 minutes at 70%
8 C13 outlets (computer and server power cords)
Pure sine wave output
USB port for automatic, clean shutdown
SmartSlot for an optional network/management card
Professional tower UPS to protect a workstation or a small server: line-interactive with voltage regulation, 1500 VA / 1000 W and an LCD display.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without eating into the battery.
Power: 1500 VA for 1000 W of usable output — a complete workstation or a small server.
Runtime: approx. 23 minutes at half load (500 W), 12 minutes at 70%.
Outlets: 8 C13 outlets (for computer and server power cords).
Management: LCD display that shows the status, load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a demanding workstation, a small server or a NAS.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
11 499 DHincl. VAT
Availability alert
APC Smart-UPS 1500VA LCD 230V Tower Line-Interactive UPS
Datasheet (PDF)
Price: 11 499,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS 1500VA LCD 230V Tower Line-Interactive UPS
Warranty
3 years
Image 1 of 2
APC
Product reference:SMX1000I
APC Smart-UPS X 1000VA Rack/Tower LCD 230V Line-Interactive UPS
Product reference:SMX1000I
Usable power 800 W
Runtime around 24 min at half load (400 W), 14 min at 70%
8 C13 outlets
USB port and SmartSlot (optional network card)
Pure sine wave output
Quiet operation (40 dB)
For a workstation or a small server: 800 W usable, runtime of around 24 minutes at half load. 8 C13 outlets, quiet operation (40 dB).
For a workstation or a small server: 800 W usable, runtime of around 24 minutes at half load. 8 C13 outlets, quiet operation (40 dB).
Usable power 800 W
Runtime around 24 min at half load (400 W), 14 min at 70%
8 C13 outlets
USB port and SmartSlot (optional network card)
Pure sine wave output
Quiet operation (40 dB)
Professional UPS, convertible between rack and tower: line-interactive with voltage regulation, 1000 VA / 800 W and an LCD display.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 1000 VA for 800 W of usable output — a workstation or a small server.
Runtime: approx. 24 minutes at half load (400 W), 14 minutes at 70% — generous runtime for its class.
Outlets: 8 C13 outlets (for computer and server power cords).
Convertible form factor: mounts in a rack or stands as a tower. Quiet operation (40 dB).
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a workstation, a small server or network hardware.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
12 999 DHincl. VAT
Availability alert
APC Smart-UPS X 1000VA Rack/Tower LCD 230V Line-Interactive UPS
Datasheet (PDF)
Price: 12 999,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 1000VA Rack/Tower LCD 230V Line-Interactive UPS
Warranty
3 years
Image 1 of 4
APC
Product reference:SMT1500RMI2U
APC Smart-UPS 1500 VA Line-Interactive UPS - 2U Rack (SMT1500RMI2U)
Product reference:SMT1500RMI2U
Usable power 1000 W
Runtime around 25 min at half load (500 W), 14 min at 70%
4 C13 outlets
USB/RS-232 port for automatic system shutdown
SmartSlot for an optional network card
Pure sine wave output
LCD control and status display
For a server or a network rack: 1000 W usable, runtime of around 25 minutes at half load. LCD control display and SmartSlot port to add a network card.
For a server or a network rack: 1000 W usable, runtime of around 25 minutes at half load. LCD control display and SmartSlot port to add a network card.
Usable power 1000 W
Runtime around 25 min at half load (500 W), 14 min at 70%
4 C13 outlets
USB/RS-232 port for automatic system shutdown
SmartSlot for an optional network card
Pure sine wave output
LCD control and status display
Professional UPS to protect servers and networking equipment: line-interactive with voltage regulation, 1500 VA / 1000 W, 2U rack form factor.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery — clean, stable power at all times.
Power: 1500 VA for 1000 W of usable output.
Runtime: approx. 25 minutes at half load (500 W), 14 minutes at 70% — plenty of time to shut your machines down properly.
Outlets: 4 C13 outlets (for computer and server power cords).
Mounts directly in an IT cabinet, with discreet operation.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a small server, a switch or networking equipment in a rack.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
15 199 DHincl. VAT
Availability alert
APC Smart-UPS 1500 VA Line-Interactive UPS - 2U Rack (SMT1500RMI2U)
Datasheet (PDF)
Price: 15 199,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS 1500 VA Line-Interactive UPS - 2U Rack (SMT1500RMI2U)
Warranty
3 years
Image 1 of 5
APC
Product reference:SMX1500RMI2U
APC Smart-UPS X 1500VA Line-Interactive UPS - Rack/Tower (SMX1500RMI2U)
Product reference:SMX1500RMI2U
Usable power 1200 W
Power factor 0.8 — a wide margin of usable power in watts
Runtime around 17 min at half load (600 W), 10 min at 70%
8 C13 outlets, all battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
LCD control and status display
Quiet operation (40 dB)
For a server or a network rack: 1200 W usable with a good power factor (0.8). Runtime of around 17 minutes at half load, quiet operation (40 dB).
For a server or a network rack: 1200 W usable with a good power factor (0.8). Runtime of around 17 minutes at half load, quiet operation (40 dB).
Usable power 1200 W
Power factor 0.8 — a wide margin of usable power in watts
Runtime around 17 min at half load (600 W), 10 min at 70%
8 C13 outlets, all battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
LCD control and status display
Quiet operation (40 dB)
Professional UPS, convertible between rack and tower: line-interactive with voltage regulation, 1500 VA / 1200 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without tapping into the battery.
Power: 1500 VA for 1200 W of usable output — its good power factor (0.8) leaves plenty of headroom in watts.
Runtime: approx. 17 minutes at half load (600 W), 10 minutes at 70%.
Outlets: 8 C13 outlets, all with battery backup.
Quiet operation (40 dB); convertible rack or tower form factor.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for a server, storage or networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
19 199 DHincl. VAT
Availability alert
APC Smart-UPS X 1500VA Line-Interactive UPS - Rack/Tower (SMX1500RMI2U)
Datasheet (PDF)
Price: 19 199,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 1500VA Line-Interactive UPS - Rack/Tower (SMX1500RMI2U)
Warranty
3 years
Image 1 of 4
APC
Product reference:SMT3000RMI2U
APC Smart-UPS 3000VA Line-Interactive UPS 2U Rack (SMT3000RMI2U)
Product reference:SMT3000RMI2U
Usable power 2700 W
Power factor 0.9 — almost all the power usable in watts
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port for automatic system shutdown
Pure sine wave output
LCD control and status display
For servers and network racks: 2700 W usable with an excellent power factor (0.9), so almost all the power is usable in watts. C13 outlets and a reinforced C19, all battery-backed.
For servers and network racks: 2700 W usable with an excellent power factor (0.9), so almost all the power is usable in watts. C13 outlets and a reinforced C19, all battery-backed.
Usable power 2700 W
Power factor 0.9 — almost all the power usable in watts
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port for automatic system shutdown
Pure sine wave output
LCD control and status display
Professional UPS for servers and network cabinets: line-interactive with voltage regulation, 3000 VA / 2700 W, 2U rack form factor.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 3000 VA for 2700 W of usable output — its excellent power factor (0.9) lets you use almost all of its capacity in watts.
Outlets: 8 C13 outlets + 1 heavy-duty C19 outlet, all with battery backup.
Pure sine wave output, ideal for servers and sensitive power supplies.
Ideal, for example, for servers, storage or business-critical networking equipment in a rack.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
28 699 DHincl. VAT
Availability alert
APC Smart-UPS 3000VA Line-Interactive UPS 2U Rack (SMT3000RMI2U)
Price: 28 699,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS 3000VA Line-Interactive UPS 2U Rack (SMT3000RMI2U)
Warranty
3 years
Image 1 of 5
APC
Product reference:SMX2200RMHV2U
APC Smart-UPS X 2200VA Line-Interactive UPS - Rack/Tower (SMX2200RMHV2U)
Product reference:SMX2200RMHV2U
Usable power 1980 W
Power factor 0.9 — almost all the power usable in watts
Runtime around 25 min at half load (990 W), 16 min at 70%
Runtime extendable with additional battery modules
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
LCD control and status display
For servers and business network equipment: 1980 W usable with an excellent power factor (0.9). Runtime of around 25 minutes at half load.
For servers and business network equipment: 1980 W usable with an excellent power factor (0.9). Runtime of around 25 minutes at half load.
Usable power 1980 W
Power factor 0.9 — almost all the power usable in watts
Runtime around 25 min at half load (990 W), 16 min at 70%
Runtime extendable with additional battery modules
8 C13 outlets + 1 reinforced C19 outlet, all battery-backed
USB port and SmartSlot (optional network card)
Pure sine wave output
LCD control and status display
Professional UPS, convertible between rack and tower: line-interactive with voltage regulation, 2200 VA / 1980 W.
Technology & protection: it switches to battery the instant the power cuts out, absorbs surges and continuously corrects voltage fluctuations without drawing on the battery.
Power: 2200 VA for 1980 W of usable output — its excellent power factor (0.9) lets you use almost all of its capacity in watts.
Runtime: approx. 25 minutes at half load (990 W), 16 minutes at 70%.
Outlets: 8 C13 outlets + 1 heavy-duty C19 outlet for power-hungry equipment.
Convertible rack or tower form factor.
LCD display: it shows the load, battery level and remaining runtime at a glance — so you can monitor the UPS without any software.
Ideal, for example, for servers, storage or business networking equipment.
Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Out of stock Warranty 3 years
31 599 DHincl. VAT
Availability alert
APC Smart-UPS X 2200VA Line-Interactive UPS - Rack/Tower (SMX2200RMHV2U)
Datasheet (PDF)
Price: 31 599,00 DH incl. VAT
Out of stock
Availability alert
APC Smart-UPS X 2200VA Line-Interactive UPS - Rack/Tower (SMX2200RMHV2U)
Warranty
3 years

Brands in UPS & Power

Estimate the delivery time for your city:

WhatsAppMessage usChat