HPE Aruba 2930F 48G 4SFP+ (JL254A) L3 managed Gigabit switch: 48 Gigabit RJ-45 ports and 4 × 10G SFP+ uplinks to connect an entire SME and link floors or buildings at very high speed. Ports: 48 × 10/100/1000 Mbit/s copper ports + 4 × 10 Gbit/s SFP+ ports for a fibre link to an aggregation switch or a server — no bottleneck, even at full load. Console port included. L3 management: static routing, RIP and Access OSPF with no licence required; VLAN, QoS, ACL, Dynamic Segmentation, VSF stacking of up to 8 units. Managed through Aruba Central (cloud) or AirWave, with Zero Touch Provisioning. Form factor: 19" 1U rack-mountable (44.25 × 24.63 × 4.39 cm), 80 PLUS Silver power supply. Key specs: 176 Gbit/s switching capacity, 112 Mpps throughput, 32,768-entry MAC table, LACP, IGMP snooping, VRRP, IPv6, REST API.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
Does the 2930F 48G JL254A power devices over PoE?
No: this part number is the non-PoE version. Its 48 Gigabit ports carry data only, and the 4 SFP+ slots are used for 10 Gbps uplinks. The PoE+ version in the series offers a 370 W budget.
Does Layer 3 routing require an additional licence?
No: static routing, RIP and OSPF are included, with no licence to buy. This sets the range apart from some competitors, where routing is paid for separately.
What are the OSPF limits on this model?
A single OSPF area and eight interfaces at most. This is access-level OSPF: enough to connect a building to a network core, not enough to carry the routed topology of an entire campus. Static routing supports 256 routes.
Can several of these switches be stacked?
Yes, up to eight, with VSF stacking: the stack is managed as a single switch, in a ring topology that survives the loss of a member. A link aggregation group can combine ports located on several members.
How is this switch deployed at a new site?
Through Zero Touch Provisioning: it fetches its configuration by itself the first time it is powered on. Monitoring is then handled through Aruba Central in the cloud or through AirWave, with a REST API to automate changes.
What happens if the network gateway goes down?
The VRRP protocol provides redundancy: a second device takes over the gateway address without the workstations noticing. Dynamic segmentation also applies user policies to wired and wireless connections alike.
What performance does this 48-port chassis offer?
176 Gbps of switching capacity and up to 112 Mpps, with a 32,768-address MAC table. The four 10 Gbps SFP+ uplinks keep 48 access ports from being choked on a single outlet.
What power supply is built into this switch?
An 80 PLUS Silver certified power supply, a sign of efficiency on equipment that stays on permanently. The chassis is 1U rack-mountable in the 19-inch format.
Is the switch new, and where can I find its datasheet?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's document details the 2930F series, its routing, its VSF stacking and its security features: datasheet (PDF).
Powers a whole floor over one cable with 10 Gbps uplinks to the network core: 370 W of PoE+ across the 48 Gigabit ports, layer 3 routing and centralised management from Aruba Central.
•PoE+ (802.3at) on all 48 ports, total budget 370 W
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
A Layer 3 switch built for wired access on a floor or across a building: integrated OSPF/RIP routing, VSF virtual stacking up to 8 units and central control from Aruba Central.
Layer 3 Gigabit: static routing, RIP and OSPF with no software licence, VLANs and access control lists. Managed from the Aruba Central cloud, stackable up to 8 units, 19-inch rack-mountable.
A Layer 3 enterprise switch with Gigabit PoE ports and 10G SFP+ links. A 400 W PoE budget to power Wi-Fi access points, cameras and IP phones without separate electrical wiring. DC power redundancy.
•24 Gigabit RJ45 ports including 16 PoE+ and 8 PoE++
Managed access switch designed for SMEs and branch offices: powers workstations, Wi-Fi access points and IP cameras over Power over Ethernet, with centralised control from Aruba Central and automated deployment.
•Managed via Aruba Central (cloud or on-premise), web GUI, CLI and REST API
•PoE+ up to 30 W per port (IEEE 802.3af/at, class 4)
48 Gigabit ports, half of them PoE+ (ports 1 to 24), for mixed SME or campus deployments — simplified control from the Aruba Instant On app, with no subscription.
•24 of the 48 ports in PoE+ (802.3at), ports 1 to 24
Total PoE+ budget of 384 W to power a large number of cameras, Wi-Fi access points and IP phones. 104 Gbps switching capacity, driven from the Omada SDN cloud.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
Covers a whole floor of cameras, Wi-Fi access points and IP phones on a single device, without multiplying power units. 10G links and a capacity of 176 Gbps absorb the combined traffic. VLANs, security and administration of enterprise equipment.
•
In stock
19 999 DHincl. VAT19 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Aruba Central or AirWave cloud management, Zero Touch Provisioning
In stock
14 599 DHincl. VAT14 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•
Total PoE budget of 400 W (up to 64 W/port in PoE++)
In stock
12 899 DHincl. VAT12 899,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•4 Gigabit fibre uplinks (SFP)
In stock
11 899 DHincl. VAT11 899,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
A Layer 3 switch built for wired access on a floor or across a building: integrated OSPF/RIP routing, VSF virtual stacking up to 8 units and central control from Aruba Central.
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
Powers a whole floor over one cable with 10 Gbps uplinks to the network core: 370 W of PoE+ across the 48 Gigabit ports, layer 3 routing and centralised management from Aruba Central.
•PoE+ (802.3at) on all 48 ports, total budget 370 W
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
Layer 3 Gigabit: static routing, RIP and OSPF with no software licence, VLANs and access control lists. Managed from the Aruba Central cloud, stackable up to 8 units, 19-inch rack-mountable.
Silent because fanless, it routes between VLANs with OSPF and VRRP, boots from a second flash chip if one fails and withstands 10 kV surges. It is managed for free in the cloud, through the web or from the command line.
Compact rack-mountable format, completely silent and fanless, suited to open-plan offices and conference rooms — simplified control from the Aruba Instant On app, with no subscription.
Total PoE+ budget of 384 W to power a large number of cameras, Wi-Fi access points and IP phones. 104 Gbps switching capacity, driven from the Omada SDN cloud.