Aruba CX 6100 48-port managed switch, for enterprise networks that need 10 Gigabit uplinks without PoE on the access ports. Connectivity: 48 10/100/1000BASE-T RJ45 ports + 4 10G SFP+ uplink ports — direct very high-speed connection to aggregation switches and servers — 1U 19" rack format. No PoE: end devices use their own local power supply, for lower power consumption and simpler cabling in deployments without power over the cable. Performance:176 Gbit/s non-blocking switching capacity, 98.6 Mpps throughput, 8,192-entry MAC table, 12.38 MB buffer. Management:AOS-CX OS — Aruba Central (cloud/on-premises), web GUI, CLI, Zero Touch Provisioning and REST API. 802.1Q VLAN (512 active), 802.3ad LACP with up to 8 LAGs, MSTP/RSTP, 802.1p/DiffServ QoS, IGMP snooping, IPv4/IPv6 ACL, RADIUS/TACACS+. Side-to-side airflow fans; 1U rack mounting kit included.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
Does the CX 6100 48G JL676A power devices over PoE?
No: this model number is the non-PoE version. Its 48 Gigabit ports carry data only, and the 4 SFP+ slots provide the uplink to the network core. The Class 4 PoE model in the same series offers a 370 W budget.
What speed do this model's uplinks reach?
They are 1G/10G SFP+ slots: you start at Gigabit and move up to 10 Gigabit without changing switches. Latency drops to 1.8 µs on a 10G link, compared with 1.9 µs on a Gigabit copper port.
Is there console access to regain control off the network?
Yes, through a USB-C console port, complemented by a USB Type-A host port for a configuration or firmware USB flash drive. A laptop's USB-C cable is enough to open the console, with no serial adapter to track down.
Can this switch route between several subnets?
Yes, with static routing for IPv4 and IPv6, with a dual stack that runs both protocols in parallel. Traffic between VLANs stays within the switch instead of going up to the router, which takes the load off the uplink at a busy site.
How many VLANs can be active simultaneously?
512 active VLANs, taken from the full 802.1Q range, with LACP aggregation of up to eight groups and 802.1p/DiffServ quality of service. IPv4 and IPv6 access control lists filter what travels between segments.
Does the switch software require a subscription?
No: the embedded software is activated without a subscription, and deployment uses Zero Touch Provisioning — the switch retrieves its own configuration the first time it is powered on, which avoids a trip to each site.
What internal performance does this 48-port model offer?
176 Gbps switching capacity and 98.6 Mpps, with a dual-core Arm Cortex-A9 processor at 1,016 MHz, 4 GB of DDR3 memory and 16 GB of eMMC memory. The sizing covers the 48 copper ports and the 4 10 Gigabit links together.
How much space does this switch take up, and how much power does it draw?
44.2 × 24.7 × 4.4 cm, i.e. 1U with a depth of 25 cm, and 44.2 W at most. Its power supply is a built-in fixed module: a simple mains power cable is all it takes, with no external power brick to fit into the rack.
How do you manage this switch across several sites?
Through Aruba Central, in the cloud or on-premises, which provides a single view of all your devices. Locally, the web interface and command line remain available, and the Switch Multi-Edit software applies the same change to several switches at once.
Is the switch new and covered by a warranty?
Yes, new equipment with a 3-year warranty, with the invoice serving as the warranty document. The manufacturer's document details the CX 6100 series, its AOS-CX features and the specifications of each model number: PDF datasheet.
A Layer 3 switch built for wired access on a floor or across a building: integrated OSPF/RIP routing, VSF virtual stacking up to 8 units and central control from Aruba Central.
Powers a whole floor over one cable with 10 Gbps uplinks to the network core: 370 W of PoE+ across the 48 Gigabit ports, layer 3 routing and centralised management from Aruba Central.
•PoE+ (802.3at) on all 48 ports, total budget 370 W
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
Layer 3 Gigabit: static routing, RIP and OSPF with no software licence, VLANs and access control lists. Managed from the Aruba Central cloud, stackable up to 8 units, 19-inch rack-mountable.
A Layer 3 enterprise switch with Gigabit PoE ports and 10G SFP+ links. A 400 W PoE budget to power Wi-Fi access points, cameras and IP phones without separate electrical wiring. DC power redundancy.
•24 Gigabit RJ45 ports including 16 PoE+ and 8 PoE++
Managed access switch designed for SMEs and branch offices: powers workstations, Wi-Fi access points and IP cameras over Power over Ethernet, with centralised control from Aruba Central and automated deployment.
•Managed via Aruba Central (cloud or on-premise), web GUI, CLI and REST API
•PoE+ up to 30 W per port (IEEE 802.3af/at, class 4)
48 Gigabit ports, half of them PoE+ (ports 1 to 24), for mixed SME or campus deployments — simplified control from the Aruba Instant On app, with no subscription.
•24 of the 48 ports in PoE+ (802.3at), ports 1 to 24
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
Total PoE+ budget of 384 W to power a large number of cameras, Wi-Fi access points and IP phones. 104 Gbps switching capacity, driven from the Omada SDN cloud.
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
•Gigabit fibre uplinks on the 4 SFP ports
4 SFP+ 10 Gbps uplinks (fibre)
In stock
32 499 DHincl. VAT32 499,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Aruba Central or AirWave cloud management, Zero Touch Provisioning
In stock
14 599 DHincl. VAT14 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•
Total PoE budget of 400 W (up to 64 W/port in PoE++)
In stock
12 599 DHincl. VAT12 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•4 Gigabit fibre uplinks (SFP)
In stock
11 899 DHincl. VAT11 899,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
•48 Gigabit 10/100/1000 RJ45 ports in total
In stock
10 599 DHincl. VAT10 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•
Class 4 PoE (802.3af/at), up to 30 W per port
•Managed through the Aruba Instant On app, the cloud or the local web interface
•802.1Q VLANs, QoS, LACP link aggregation (8 trunks), IGMP Snooping
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
A Layer 3 switch built for wired access on a floor or across a building: integrated OSPF/RIP routing, VSF virtual stacking up to 8 units and central control from Aruba Central.
Covers a whole floor of cameras, Wi-Fi access points and IP phones on a single device, without multiplying power units. 10G links and a capacity of 176 Gbps absorb the combined traffic. VLANs, security and administration of enterprise equipment.
Rack-mountable Easy Smart switch, the middle ground for an SME that wants VLANs and QoS without the complexity of a fully managed switch, through a simple web interface.
Designed for video surveillance: a 384 W PoE+ budget shared across the powered ports, transmission up to 250 m and power maintained even when the switch restarts. Rackable metal housing, VLAN and automatic loop prevention.
Compact rack-mountable format, completely silent and fanless, suited to open-plan offices and conference rooms — simplified control from the Aruba Instant On app, with no subscription.
Rack-mountable Easy Smart switch for an SME that wants to segment and secure its network with VLANs and QoS, without the complexity of a fully managed switch — configurable from a simple web interface.
•802.1Q VLANs, port-based and MTU (up to 128 simultaneous VLANs)