High PoE+ budget of 384 W combined with 4 uplinks at 10 Gigabit, with no bottleneck towards the network core. 128 Gbps switching capacity, driven from the Omada SDN cloud.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
What do this model's 4 10-Gigabit links bring?
They remove the bottleneck towards the network core or the server: 24 Gigabit access ports then uplink over four 10 Gbps links instead of a single copper link. Switching capacity reaches 128 Gbps at 95.23 Mpps.
What PoE budget does this switch offer across its 24 ports?
384 W in total, with up to 30 W per port under the 802.3af and 802.3at standards. Twenty-four 12 W cameras draw less than 300 W; a dozen 30 W motorised cameras exhaust the budget.
Can this switch route between VLANs?
Yes, with Layer 2+ static routing: up to 48 IPv4 and IPv6 static routes. Each 802.1Q VLAN gets its own interface and the switch forwards traffic from one to another, without sending internal traffic all the way up to the firewall.
How can network sockets be protected from an unknown computer?
With 802.1X, IP-MAC-Port binding, Layer 2 to 4 access control lists and DHCP snooping. An unauthenticated computer stays off the network, and one machine cannot spoof another's address.
How is this switch managed day to day?
From the Omada SDN platform, for centralised cloud management, or locally via the web interface, command line and SNMP. Dual image lets you roll back to the previous firmware version if an update goes wrong.
What buffer memory does this switch have to absorb traffic bursts?
12 Mbit of buffer and a table of 16,000 MAC addresses: enough to absorb peaks when the four 10-Gigabit links are working at the same time on a dense network, without dropping packets.
What form factor does this switch take in a rack?
A 1U, 19-inch standard chassis, to be installed in a rack or a technical room. Like any PoE switch of this density, it is fan-cooled: allow the necessary clearance and avoid placing it in an occupied office.
Is the switch new, and where can I view its datasheet?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's document details the JetStream L2+ range and its routing, security and quality of service features: PDF datasheet.
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
•Switching capacity 128 Gbps, 95 Mpps
•4 SFP+ 10 Gbps uplinks
•Fast PoE and Perpetual PoE (continuity during restarts)
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
Managed switch that powers its ports over PoE+ through the network cable, with two 2.5 Gbps combo ports for recent Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•22 Gigabit PoE+ RJ45 ports and 2 combo ports at 2.5 Gbps PoE+ (copper or fibre)
Managed switch that keeps your PoE equipment powered even during a restart (perpetual PoE), for continuity of service on critical cameras or Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
•Class 4 PoE (802.3af/at), up to 30 W per port
•Managed through the Aruba Instant On app, the cloud or the local web interface
•802.1Q VLANs, QoS, LACP link aggregation (8 trunks), IGMP Snooping
Total PoE+ budget of 384 W to power a large number of cameras, Wi-Fi access points and IP phones. 104 Gbps switching capacity, driven from the Omada SDN cloud.
Managed access switch designed for SMEs and branch offices: powers workstations, Wi-Fi access points and IP cameras over Power over Ethernet, with centralised control from Aruba Central and automated deployment.
•Managed via Aruba Central (cloud or on-premise), web GUI, CLI and REST API
•PoE+ up to 30 W per port (IEEE 802.3af/at, class 4)
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
•Switching capacity 128 Gbps, 95 Mpps
•4 SFP+ 10 Gbps uplinks
•Fast PoE and Perpetual PoE (continuity during restarts)
Layer 2 Gigabit switch for SMEs, with PoE+ ports to power cameras and Wi-Fi access points, plus SFP fibre links. Silent rackable format, driven through UniFi Network.
Managed switch that keeps your PoE equipment powered even during a restart (perpetual PoE), for continuity of service on critical cameras or Wi-Fi access points. Configurable through the HUAWEI eKit App cloud or locally.
•24 Gigabit PoE+ RJ45 ports
•2 SFP+ ports at 10 Gbps and 2 SFP ports at 2.5 Gbps for the uplink
•Fast and perpetual PoE — power kept up during restarts
Managed switch that powers up to 24 devices (cameras, Wi-Fi access points, IP phones) over the network cable, with a 400 W PoE+ budget. Uplinks at 2.5 Gbps for recent access points.
