nJoy Echo Pro 1000 Online UPS - 800 W / 1000 VA - 3 Schuko outlets (UPOL-OL100EP-CG)
Compatible with Synology NAS units over USB: the NAS shuts itself down cleanly when the battery runs low. Around 6 minutes of runtime at half load (400 W), for under 40 dB in operation.
Runtime: 6 min at 50% load (400 W), 19 min at 25%
Schuko outlets: an everyday device plugs straight in, with no adapter
Automatic NAS or server shutdown over USB HID, compatible with Synology NAS units
RS-232, EPO and SNMP ports for supervision and emergency shutdown
PowerGuide and PowerMaster software for monitoring
Online UPS to protect a server or sensitive equipment: online double-conversion, 1000 VA / 800 W. Technology & protection: power is fully regenerated, continuously — your devices are never connected directly to the mains, with no transfer time. Complete protection against power cuts, surges, voltage fluctuations and electrical noise. Power: 1000 VA for 800 W of usable power — its excellent power factor puts almost all of the rated power to work in watts. Outlets: 3 Schuko outlets (earthed household sockets) — plug your devices in directly, no adapter needed. LCD display: shows load, battery level and remaining runtime at a glance — monitor the UPS without any software. Ideal, for example, for a small server, a NAS or network equipment. Remember to check how much power your equipment draws and to choose the capacity according to the runtime you need.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How long does the Echo Pro 1000 run on battery?
6 minutes at 50% load, i.e. 400 W, and 19 minutes at 25%. Recharging then brings the battery back to 90% in 4 hours. As with any UPS, it is the actual load, not the VA rating, that determines the runtime.
What input voltage does the Echo Pro 1000 accept?
From 80 to 300 V — an exceptionally wide window. On a grid that regularly sags to low voltage, the UPS keeps regenerating the power instead of switching to battery and draining it within a few cycles.
Is this UPS compatible with a Synology NAS?
Yes, compatibility is stated: connected via USB HID, the NAS detects the power cut and shuts itself down cleanly before the battery runs out. This is the feature that avoids a volume rebuild on restart.
Is the output of the Echo Pro 1000 a pure sine wave?
Yes, a pure sine wave, continuously regenerated by double conversion. Your equipment is never connected directly to the mains and there is no transfer time when a power cut occurs.
Can the Echo Pro 1000 be used behind a generator?
Yes, generator compatibility is stated. Combined with the 80 to 300 V input range, this makes it a serious candidate where the grid is frequently interrupted and a generator takes over.
Why does 1000 VA only give 800 W?
The output power factor is 0.8: 800 W actually available for 1000 VA. That is much better than the 0.6 of entry-level UPSs. On the input side, however, the power factor reaches 0.99: the UPS puts virtually no disturbance back onto the upstream grid.
How many outlets does the Echo Pro 1000 have, and are they battery-backed?
Three Schuko outlets, all both battery-backed and surge-protected. The input surge protector is rated at 220 joules.
Can an online UPS stay in an office?
This one, yes: it is rated at less than 40 dB, which is low for a double-conversion unit. Its ECO mode also reaches 96% efficiency when the mains is clean, which limits the heat given off.
How do you monitor the Echo Pro 1000 or cut it off in an emergency?
Four interfaces: USB HID, RS-232, SNMP for network monitoring and an EPO emergency power off contact. The PowerGuide and PowerMaster software handle monitoring and automatic shutdown of the machines.
Does the UPS restart on its own after an extended power cut?
Yes, restart and recharging are automatic when power returns. In the meantime, its LCD screen shows the load, battery level and any faults, with no software required.
Is the nJoy Echo Pro 1000 UPS new and under warranty?
Yes, new equipment, with the invoice serving as the warranty document, for 3 years. The tower unit measures 327 × 140 × 190 mm and weighs 9.13 kg; the datasheet details all the protection features.
Quiet at under 37 dB, it holds 11.5 minutes at half load (400 W): enough to save and shut down a NAS or a small server without losing anything. Its batteries are replaced without cutting the power.
•11.5 minutes of runtime at half load (400 W)
•5 minutes of runtime at full load
•4 C13 outlets, the format used by computer and server cords
An online double-conversion 2U rack or tower UPS for a network rack: 900 W of pure sine wave power, hot-swappable batteries, runtime extendable with an external pack and rail kit included.
Short 438 mm depth for small racks: power continuously regenerated with zero transfer time, 4 C13 outlets, hot-swappable batteries and automatic server shutdown over USB or RS232.
An online double-conversion tower UPS for a server or a small rack: 1800 W of pure sine wave power, no transfer time, 13 minutes at half load and an input tolerated from 80 to 280 V.
2400 W genuinely available and 13.5 minutes of battery life at half load (1200 W): time enough to save and shut down cleanly. Under 37 dB, it can stay beside the workstation it protects.
16 minutes of runtime at half load (800 W), and under 37 dB: it can sit next to a workstation without being heard. Its batteries are replaced without cutting the power.
•16 minutes of runtime at half load (800 W)
•7 minutes of runtime at full load
•6 C13 outlets, the format used by computer and server cords
26 minutes of runtime for 400 W drawn, 12 minutes at half load (800 W): ample time to save and shut down cleanly. The LCD display shows the load and the remaining runtime without any software.
A 2000 VA / 1800 W double-conversion online UPS in 2U rack format, for a server, a NAS or the core of a network. Pure sine wave output, four C13 outlets, LCD screen, USB, RS-232 and a network card slot; the rails are ordered separately.
•Runtime: 13 min at half load, 4.5 min at full load
In stock
8 599 DHincl. VAT8 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
9 999 DHincl. VAT9 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
An online double-conversion 2U rack or tower UPS: 1800 W of pure sine wave power for a server and its rack, efficiency up to 94%, hot-swappable batteries and runtime extendable with an external pack.
•2000 VA / 1800 W, online double conversion
•2U rack or tower, brackets and rail kit included
•Pure sine wave, zero transfer time
In stock
10 308 DHincl. VAT10 308,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
10 399 DHincl. VAT10 399,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Runtime 12 minutes at half load (800 W)
•Runtime 26 minutes for 400 W drawn
•C13 outlets: the format of computer and server power cords
The most powerful Amplon RT: 2700 W of pure sine wave power, in 2U rack or tower, for several servers or a storage rack. Hot-swappable batteries, extendable runtime and efficiency up to 94%.
Quiet at under 37 dB, it holds 11.5 minutes at half load (400 W): enough to save and shut down a NAS or a small server without losing anything. Its batteries are replaced without cutting the power.
•11.5 minutes of runtime at half load (400 W)
•5 minutes of runtime at full load
•4 C13 outlets, the format used by computer and server cords
Short 438 mm depth for small racks: power continuously regenerated with zero transfer time, 4 C13 outlets, hot-swappable batteries and automatic server shutdown over USB or RS232.
26 minutes of runtime for 400 W drawn, 12 minutes at half load (800 W): ample time to save and shut down cleanly. The LCD display shows the load and the remaining runtime without any software.
Nineteen minutes of runtime at half load, extended to fifty with an additional battery cabinet. The 16 12 V batteries are chosen and ordered separately.
Doubling the runtime comes down to one extra battery cabinet: 9 minutes at half load become 23 minutes. The 16 12 V batteries are chosen and ordered separately.
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
An online double-conversion 2U rack or tower UPS for a network rack: 900 W of pure sine wave power, hot-swappable batteries, runtime extendable with an external pack and rail kit included.
16 minutes of runtime at half load (800 W), and under 37 dB: it can sit next to a workstation without being heard. Its batteries are replaced without cutting the power.
•16 minutes of runtime at half load (800 W)
•7 minutes of runtime at full load
•6 C13 outlets, the format used by computer and server cords
Floor-standing, 68.5 cm high and 54 kg: the tower version, for when there is no rack. Around 11 minutes of runtime at half load (3000 W) and 94% efficiency at full load.