Delta Power Solutions Amplon N 3K Online UPS - 2700 W / 3000 VA - 6 C13 + 1 C19 Outlets (UPS302N2000B035)
The most powerful Amplon N: 2700 W of pure sine wave power with no transfer time for several servers or a rack, on 6 internal batteries, with 13 minutes at half load and an input tolerated from 80 to 280 V.
3000 VA / 2700 W, online double conversion
Pure sine wave, zero transfer time
Runtime: 13 min at half load, 4.5 min at full load
6 C13 outlets and 1 C19 16 A outlet
80 to 280 V input, generator compatible
Efficiency up to 93%
LCD screen, USB port and UPSentry 2012 software
MINI slot for an optional SNMP, relay or Modbus card
An online double-conversion UPS for a server rack or critical equipment: pure sine wave, zero transfer time and 2700 W of real power. Technology: power is rebuilt continuously; your equipment never sees the outages, noise or fluctuations of the grid. Power: 3000 VA / 2700 W (power factor 0.9), on 6 internal 12 V / 9 Ah batteries. Runtime: 13 min at half load, 4.5 min at full load. Outlets: 6 C13 outlets and 1 C19 16 A outlet for power-hungry equipment. Management: LCD screen, USB port, UPSentry software and an SNMP card slot (optional card). Efficiency up to 93% and an input of 80 to 280 V: it withstands the most unstable grid, ideal for example for several servers, a storage rack or telecom equipment.
The most powerful Amplon N delivers 2,700 W in double conversion from six internal 12 V, 9 Ah batteries. The front carries the screen and three buttons; all the wiring goes through the back, where seven outlets wait for servers, storage and network.
Three ways to control it
The same UPS is controlled from its front panel, from a computer connected over USB or from the network: choose according to the size of the room and how many people look after it.
Three buttons, SETUP, ON and OFF, and a screen showing input or output voltage and frequency, load in kVA, kW or percent, battery status, temperature and, during an outage, the remaining backup time. Holding a button for 3 seconds in normal operation starts a 10-second battery test. In setup mode you set the output voltage and frequency, the bypass range and the overload alarm, and you can mute the buzzer.
Connected to a computer through its USB port, with the virtual COM port driver and UPSentry 2012 software, the UPS is monitored from the desk: live status, estimated battery reserve before or during an outage, and an automatic battery test at regular intervals, which the panel alone cannot schedule.
The MINI slot at the back takes an optional card: SNMP to supervise the UPS over the network, relay I/O to connect its states to a contact-based installation, Modbus for building management, or TVSS to add surge protection. No card is supplied: you equip the UPS to suit the room.
What it powers, and what it refuses
Six C13 outlets and one C19 outlet: the original cords of servers, storage arrays and switches plug straight in, and the C19 takes the most power-hungry device.
YesComputers, servers and their peripherals: monitors, modems, external hard drives, tape backup drives.
NoLoads that feed energy back into the UPS, and asymmetrical loads such as a half-wave rectifier.
Never in a loopThe UPS input cord never plugs into its own output outlets.
Where to put it: in a temperate, dry room, with 15 cm clear on every side for ventilation and the grilles never covered. Connect it to an earthed outlet, without an extension cord, with upstream and downstream protection installed within easy reach. In a dusty room, fit it with a dust filter.
The same 190 × 390 × 325 mm cabinet exists in 2 kVA: the Amplon N 2K, with 1,800 W and four batteries.
Technical specifications
Technical specifications
Output voltage
220/230/240 V ± 2% (linear load)
Waveform type
Pure sine wave
Output harmonic distortion
< 3% at linear load
Output connections
(6) IEC C13 + (1) IEC C19
Input voltage
220/230/240 V
Input frequency
50/60 Hz ± 10 Hz
Input connections
1 IEC C20 inlet (16 A input cord included)
Voltage range
80 - 280 V (175 - 280 V at full load, 80 - 175 V between 50 and 100% load)
Battery type
Sealed lead-acid, 6 x 12 V / 9 Ah (72 V)
Battery management
Intelligent charge management; cold start on battery
Typical recharge time
4 hours to 90% charge
Interface port
1 USB port
User interface
LCD screen and LED indicators
Audible alarm
Yes, beeper can be muted from the panel
Power management software
UPSentry 2012 (Delta)
Weight (kg)
24.4 kg
Dimensions (W x D x H) (mm)
190 x 390 x 325 mm
Technology
On-line
Power (VA)
3,000 VA
Voltage stabiliser
Yes
Box contents
UPS · 16 A input cord · 10 A output cord · 16 A output cord · User manual
Technical specifications (continued)
Preinstalled batteries
Yes, internal batteries
Communication card slot
1 MINI slot for an SNMP, relay, Modbus or TVSS card (optional, not included)
Transfer/switching time
0 ms (continuous double conversion)
Cold start
Yes
Bypass
Internal automatic bypass
Audible noise
< 48 dBA
Power factor (ratio)
0.9
Crest factor
3:1
Input power factor
> 0.99 (full load)
Output frequency
50/60 Hz ± 0.05 Hz
Phase (output/input)
Single-phase / Single-phase
Overload capacity
< 105% continuous; 105 to 125% for 1 minute; 125 to 150% for 30 seconds
Double-conversion efficiency
Up to 93%
Output type
C13 outlets
Power (W)
2,700 W
Runtime
13 min at half load; 7 min at 75% load; 4.5 min at full load
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How much runtime does the Delta Amplon N 3K UPS offer?
About 13 minutes at half load, 7 minutes at 75% load and 4.5 minutes at full load (2700 W). That is enough time to finish a task and shut the servers down cleanly, or to hold until a generator starts. This model does not accept an external battery pack: for more runtime, you need a model with extendable batteries.
Why choose the online Amplon N 3K rather than a line-interactive UPS?
Because it rebuilds the power continuously: your equipment is powered by the UPS, never directly by the grid. No transfer time when power fails, a pure sine wave and an output voltage held within ± 2%, even when the mains varies from 80 to 280 V. It is the protection expected for a server or critical equipment.
Which equipment can be connected to the Delta Amplon N 3K?
Six devices on its IEC C13 outlets, the format of servers, NAS, switches and PCs, plus one power-hungry device on the 16 A C19 outlet. A 10 A output cord and a 16 A output cord are included. The UPS itself connects to the mains with its 16 A input cord, on a wall socket rated for that current.
Can the Amplon N 3K be monitored remotely?
Yes. Through its USB port and the UPSentry 2012 software, it triggers the automatic shutdown of servers and tracks the battery status. Its MINI slot accepts an optional SNMP card for network monitoring, a relay contact card or a Modbus card for building management.
What is the difference between the Amplon N 3K and the Amplon N 2K?
The 3K delivers 3000 VA / 2700 W versus 2000 VA / 1800 W, with six 12 V / 9 Ah batteries instead of four, and announces the same typical runtime at an equal load ratio, 13 minutes at half load. Both share the 190 × 390 × 325 mm tower case, the 6 C13 outlets and the C19 outlet; the 3K weighs 24.4 kg versus 18.6 kg.
2400 W genuinely available and 13.5 minutes of battery life at half load (1200 W): time enough to save and shut down cleanly. Under 37 dB, it can stay beside the workstation it protects.
Up to four external battery modules extend the 10.5 minutes of runtime at half load. The 2U rack mounting kit, the output cords and the USB cable are included.
•Runtime: 10.5 min at half load, 3.5 min at full load
•Runtime extendable by up to 4 external battery modules
16 minutes of runtime at half load (800 W), and under 37 dB: it can sit next to a workstation without being heard. Its batteries are replaced without cutting the power.
•16 minutes of runtime at half load (800 W)
•7 minutes of runtime at full load
•6 C13 outlets, the format used by computer and server cords
Every outlet is battery-backed, with around 11 minutes of runtime at half load (990 W). Automatic and manual internal bypass, LCD screen and a detachable 2.44 m cord supplied.
Ten battery-backed outlets, four of them heavy-duty 16 A, for 4 500 W usable and around 11 minutes of runtime at half load (2 250 W). The Web/SNMP management card is included.
•4 500 W usable output (power factor of 0.9)
•Around 11 minutes of runtime at 50% load (2 250 W), 7 minutes at 70% (3 150 W)
An online double-conversion tower UPS for a server or a small rack: 1800 W of pure sine wave power, no transfer time, 13 minutes at half load and an input tolerated from 80 to 280 V.
Twenty minutes of runtime at half load (2 400 W), extended to several hours with up to four external battery cabinets. The standard maintenance bypass allows the unit to be swapped without shutting down the equipment.
•Around 20 minutes of runtime at half load (2 400 W)
Quiet at under 37 dB, it holds 11.5 minutes at half load (400 W): enough to save and shut down a NAS or a small server without losing anything. Its batteries are replaced without cutting the power.
•11.5 minutes of runtime at half load (400 W)
•5 minutes of runtime at full load
•4 C13 outlets, the format used by computer and server cords
Power factor of 1: all 8 000 W stated are available. Ten battery-backed outlets, four of them heavy-duty 16 A, and the Web/SNMP network management card is included.
•8 000 W usable output (power factor of 1)
•6 C13 outlets, the format used by computer and server power cords, all battery-backed
C13 outlets: the format of computer and server power cords
In stock
14 799 DHincl. VAT14 799,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
The most powerful Amplon RT: 2700 W of pure sine wave power, in 2U rack or tower, for several servers or a storage rack. Hot-swappable batteries, extendable runtime and efficiency up to 94%.
•3000 VA / 2700 W, online double conversion
•2U rack or tower, brackets and rail kit included
•Pure sine wave, zero transfer time
In stock
13 062 DHincl. VAT13 062,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
In stock
8 799 DHincl. VAT8 799,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•Around 11 minutes of runtime at 50% load (990 W), 7 minutes at 70% (1 386 W)
•All output outlets are battery-backed
•C13 outlets in the format used by computer and server power cords, C19 outlets heavy-duty at 16 A
In stock
19 499 DHincl. VAT19 499,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
6 C13 outlets, the format used by computer and server power cords, all battery-backed
In stock
51 199 DHincl. VAT51 199,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•2000 VA / 1800 W, online double conversion
•Pure sine wave, zero transfer time
•Runtime: 13 min at half load, 4.5 min at full load
In stock
8 599 DHincl. VAT8 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Runtime extendable with one to four external battery cabinets
•Internal bypass and maintenance bypass as standard
In stock
21 199 DHincl. VAT21 199,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
In stock
4 599 DHincl. VAT4 599,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
4 C19 outlets, heavy-duty 16 A, also battery-backed