Powers and connects a whole floor over a single cable: 370 W PoE+ on all 48 Gigabit ports, Layer 3 routing (OSPF/RIP) and centralised Aruba Central control for dense Wi-Fi and video surveillance.
Gigabit 10/100/1000 speed on all 48 RJ45 ports
PoE+ (802.3at) on all 48 ports, total budget 370 W
Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
4 SFP 1 Gbps uplinks (fibre)
Layer 3 routing: OSPF, RIP, static routing
VSF virtual stacking of up to 8 switches
Aruba Central (cloud) management, web interface, CLI
Aruba 2930F 48G PoE+ 4SFP managed switch (JL262A): 48 Gigabit PoE+ ports and 4 × 1GbE SFP uplinks to connect and power all the devices on a floor over a single cable — Wi-Fi access points, IP cameras, IP phones — with no additional electrical wiring. PoE:802.3at standard on all 48 Gigabit RJ45 ports, 370 W total budget — ideal for dense Wi-Fi deployments and multi-camera video surveillance across an entire floor. Layer 3 routing: OSPF, RIP, static routing, 802.1Q VLAN, QoS, ACL, 802.1X security, port security — managed from Aruba Central (cloud), the web interface and CLI. Form factor: 1U 19-inch rack-mountable. Also:104 Gbit/s switching capacity, 77.4 Mpps throughput, 32,768-entry MAC table, LACP, STP/RSTP/MSTP, IGMP snooping, SNMPv3, IPv6, RADIUS/TACACS+.
Be the first to review this product and help other customers.
Write a review
Frequently asked questions about this product
How is the 370 W of PoE+ shared across 48 ports?
370 W shared by all 48 ports, with a maximum of 30 W per port under 802.3at. The budget fills up quickly: around thirty 12 W cameras use almost all of it. The number of ports is not the limit — the budget is.
What speed do this model's uplinks reach?
Four SFP slots at 1 Gbps — not 10G SFP+. With 48 access ports, it is therefore wise to aggregate several fibre links to avoid a bottleneck towards the network core.
Can this switch route between several subnets?
Yes, it is a Layer 3 model: static routing — 256 routes —, RIP v1, v2 and RIPng, and Access OSPF in OSPFv2 and OSPFv3. VLAN segmentation therefore no longer means sending internal traffic all the way up to the router.
What are the OSPF limits on this model?
A single OSPF area and eight interfaces at most. This is access-level OSPF: enough to connect a building to a network core, not enough to carry the routed topology of an entire campus.
Can several 2930F switches be stacked and managed as one?
Yes, up to eight with front-panel VSF stacking: the stack is managed as a single chassis, in a ring topology that survives the loss of a member. A link aggregation group can even combine ports on several members.
How many VLANs can this switch carry at once?
2,000 active VLANs, with IDs taken from the full 802.1Q range of 4,094 values. RPVST+ calculates one spanning tree per VLAN, and private VLANs isolate workstations on the same segment.
How much buffer memory does this switch have to absorb traffic bursts?
12.38 MB, of which 4.5 MB is ingress and 7.875 MB egress, with a 32,768-address MAC table. Switching capacity reaches 104 Gbps at 77.4 Mpps — enough to handle an entire floor of workstations and access points.
What happens when an Aruba access point is plugged into a port?
The switch recognises it and applies the associated settings by itself: VLAN, class of service, maximum PoE power and PoE priority. On a Wi-Fi deployment of several dozen access points, that is that many data-entry errors avoided.
How can I regain control of this switch when the network is down?
Through out-of-band management: an RS-232C serial port or a micro-USB port opens the console. In-band, the choice remains wide — web interface, command line, Telnet, SNMP, RMON1, FTP and the Aruba Central, AirWave or HPE IMC platforms.
Is the switch new, and where can I find its datasheet?
Yes, new equipment, with the invoice serving as the warranty document. The manufacturer's document details the 2930F series, its routing, its VSF stacking and its security features: datasheet (PDF).
Smart managed layer 2 switch for a dense fleet of workstations and servers, with configuration and monitoring via the Instant On mobile app, the cloud portal or a local web interface.
•Layer 2, configurable via the Instant On app, the cloud portal and the local web interface
Covers a whole floor of cameras, Wi-Fi access points and IP phones on a single device, without multiplying power units. 10G links and a capacity of 176 Gbps absorb the combined traffic. VLANs, security and administration of enterprise equipment.
Silent because fanless, it routes between VLANs with OSPF and VRRP, boots from a second flash chip if one fails and withstands 10 kV surges. It is managed for free in the cloud, through the web or from the command line.
Eight PoE+ sockets to power Wi-Fi access points, cameras and IP phones, in a compact fanless unit you forget is in the office. Enterprise-grade AOS-CX system, managed from the cloud or the command line.
Fast PoE instantly powers cameras, Wi-Fi access points and IP phones over the network cable, with no break on restart. Four 10G links absorb traffic to the network core. Web, cloud app or command line control, built-in DoS/802.1X security.
Total PoE+ budget of 384 W to power a large number of cameras, Wi-Fi access points and IP phones. 104 Gbps switching capacity, driven from the Omada SDN cloud.
Aruba Instant On switch for small businesses: full L2+ managed from the mobile app, the cloud portal or a local web interface, with a more measured PoE budget for flexible deployment of Wi-Fi access points and IP cameras.
Switching capacity 176 Gbps, 131 Mpps
•4 SFP+ 10 Gbps uplinks
•Fast PoE and Perpetual PoE (continuity during restarts)
In stock
6 922 DHincl. VAT6 922,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
Fanless operation, completely silent
In stock
7 679 DHincl. VAT7 679,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
6 069 DHincl. VAT6 069,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
128 Gbps switching capacity
•OSPFv2/v3 routing
•VRRP gateway redundancy
In stock
5 159 DHincl. VAT5 159,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
•8 x Gigabit PoE+ class 4 ports
•2 x 1G SFP ports for uplinks
•PoE budget 67 W, 30 W per port
In stock
4 999 DHincl. VAT4 999,00 DHincl. VAT
Delivery everywhereDelivered all over Morocco
12 of the 24 ports in PoE+ (802.3at), ports 1 to 12
•Up to 30 W per port — access points, IP phones, cameras
Powers a whole floor over one cable with 10 Gbps uplinks to the network core: 370 W of PoE+ across the 48 Gigabit ports, layer 3 routing and centralised management from Aruba Central.
•PoE+ (802.3at) on all 48 ports, total budget 370 W
•Up to 30 W per port — Wi-Fi access points, IP cameras, IP phones
Total PoE+ budget of 384 W to power a large number of cameras, Wi-Fi access points and IP phones. 104 Gbps switching capacity, driven from the Omada SDN cloud.
48 Gigabit ports, half of them PoE+ (ports 1 to 24), for mixed SME or campus deployments — simplified control from the Aruba Instant On app, with no subscription.
•24 of the 48 ports in PoE+ (802.3at), ports 1 to 24
Covers a whole floor of cameras, Wi-Fi access points and IP phones on a single device, without multiplying power units. 10G links and a capacity of 176 Gbps absorb the combined traffic. VLANs, security and administration of enterprise equipment.
Designed for video surveillance: a 384 W PoE+ budget shared across the powered ports, transmission up to 250 m and power maintained even when the switch restarts. Rackable metal housing, VLAN and automatic loop prevention.
A managed enterprise switch that powers IP cameras, Wi-Fi access points and phones on every one of its ports, with no mains socket. Switching capacity 176 Gbps, stackable, upgradable to fibre.
Layer 3 managed enterprise switch (static routing and RIP) that powers all its ports over the network cable, for cameras and Wi-Fi access points. Switching capacity 128 Gbps, upgradable to 10 Gbps fibre.
A Layer 3 enterprise switch with Gigabit PoE ports and 10G SFP+ links. A 400 W PoE budget to power Wi-Fi access points, cameras and IP phones without separate electrical wiring. DC power redundancy.
•24 Gigabit RJ45 ports including 16 PoE+ and 8 PoE++
Managed access switch designed for SMEs and branch offices: powers workstations, Wi-Fi access points and IP cameras over Power over Ethernet, with centralised control from Aruba Central and automated deployment.
•Managed via Aruba Central (cloud or on-premise), web GUI, CLI and REST API
•PoE+ up to 30 W per port (IEEE 802.3af/at, class 4)
Cisco Catalyst 2960-X managed switch with LAN Base image: 24 Gigabit PoE+ ports with a 370 W budget, 4 SFP 1 Gbps uplink ports and FlexStack-Plus stacking of up to 8 switches. 1U, 5.8 kg, for a 19-inch rack.
